00-343-9744
Flow Control Valve
Used on steam turbine, ships propulsion system.
00-343-9859
Check Valve
6 all ends bolt hole quantity straight thru
00-344-0351
Valve Disk
2b thread class 14 thread quantity per inch plug uns thread series
00-344-0352
Valve Disk
2b thread class plug unc thread series
00-344-0353
Fluid Valve Stem
16.625" overall length
00-344-0354
Valve Seat
2a first threaded portion thread class 0.438" first threaded portion err default 16 first threaded portion thread quantity per inch plain flanged un first threaded portion thread series
00-344-0720
Globe Valve
This item has been reviewed for asbestos material. the current approved source, 53711, has indicated their part number contained asbestos prior to 1984. they continue to manufacture the same part number without asbestos material after 1984
00-344-0807
Regulating Fluid Pressure Valve
40.0 micron smallest size particle filtered
00-344-0808
Compressed Gas Regulator
Includes filter
00-344-1449
Valve Seat
Plain flanged
00-344-4511
Relief Pressure And Temper Valve
00-344-4712
Safety Relief Valve
3a 1st end thread class right-hand 1st end anodize surface treated unf 1st end thread series
00-344-4717
Flow Control Valve
Used on pettibone crane,wheel mounted,hydraulic.
00-344-4718
Linear Directional Control Valve
Steel body
00-344-5079
Plug Valve
Used on misc ship parts.
00-344-5253
Valve Body
Used on guns 125 to 150 mm.
00-344-5730
Valve Cap
Used on drive,hydraulic.
00-344-6554
Valve Seat
Plain
00-344-7565
Flow Control Valve
0/a dia 0.993-0.999in. o/a lg 0.530in.
00-344-7896
Valve Flat Diaphragm
00-344-9343
Valve Flat Diaphragm
0.062" material thickness 0.640" center hole diameter flat
00-345-4698
Safety Relief Valve
3a 1st end thread class right-hand 1st end 20 1st end thread quantity per inch anodize surface treated unf 1st end thread series
00-345-8002
Check Valve
3a all ends thread class right-hand all ends passivate surface treated straight thru unf all ends thread series
00-345-8503
Safety Relief Valve
Right-hand 1st end anodize surface treated npt 1st end thread series
00-345-8508
Expansion Valve
00-345-8579
Rotary Valve Plug
2.327" overall length two holes 0.688 in. dia; 0.250-20 internal thd, top end 1.500 in. dia; bottom end 1.688 in.dia
00-345-8586
Valve Disk
0.812" inside diameter plain
00-345-8590
Fluid Filtering Disk
Round (basically flat)
00-345-8593
Flow Control Valve
00-345-8653
Check Valve Parts Kit
0.750 in. swing check valve size
00-346-1774
Valve Disk
2b thread class fin type disk guide plug unf thread series
00-346-1779
Valve Seat
2a single threaded portion thread class 1.000" single threaded portion thread length hex wrench hole B5 plain threaded unef single threaded portion thread series
00-346-1820
Valve Flat Diaphragm
00-346-1821
Valve Flat Diaphragm
4.375" hole diameter 0.150" material thickness 8 bolt hole quantity flat
00-346-1823
Valve Flat Diaphragm
0.410" hole diameter 0.116" material thickness 12 bolt hole quantity flat
00-346-1870
Safety Relief Valve
Right-hand all ends npt all ends thread series
00-346-2317
Pressure Equalizing Gaseou Valve
00-346-2536
Safety Relief Valve
Right-hand all ends C7 straight thru note: to be used for valve bodies of separable sections. npt all ends thread series
00-346-2703
Stop-check Valve
Right-hand 2nd end straight thru npt 2nd end thread series
00-346-3272
Valve Seat
1.000" single threaded portion thread length 8 single threaded portion thread quantity per inch two lugs, 0.625 in.X0.750 in., welded on large id, diametrically opposite each other faucet uns single threaded portion thread series
00-346-3425
Safety Relief Valve
00-346-4211
Restrictor Check Valve
3a 1st end thread class right-hand 1st end 20 1st end thread quantity per inch 2.250 in. lg over-all, 0.688 in. across flats straight thru unf 1st end thread series
00-346-4212
Restrictor Check Valve
3a 1st end thread class right-hand 1st end 20 1st end thread quantity per inch 2.250 in. lg over-all, 0.688 in. across flats straight thru unf 1st end thread series
00-346-4213
Restrictor Check Valve
3a 1st end thread class right-hand 1st end 20 1st end thread quantity per inch straight thru unf 1st end thread series
