01-585-1669
Straight Pipe To Hose Adapter
Male connector
01-585-1686
Pipe Anchor And Reinforcem Clamp
Used on c-130 engine nacelle quick change sling assy p/n.
01-585-1707
Fitting Lubrication Adapter
Used on r-18 pump unit assy part of 0417-00-1000 fuels operational readiness capability force.
01-585-1737
Hose Bulkhead Connector
Bulkhead, union, brass, 1/2 inch
01-585-1957
Tube Elbow
Used on uh-1y huey upgrade kit. fitting assembly, elbow 90 degrees, nonreducer, internal flare to flared tube also includes safety wire made of 302 or 305 cres that is passivated anodize body surface treated elbow
01-585-2009
Fitting Lubrication Adapter
Used on r-18 pump unit assy part of 0417-00-1000 fuels operational readiness capability force.
01-585-2060
Pipe To Tube Swivel Joint
Used on cat 1 and cat ii mrap. 5/8 inch tube x 1/2 npt; swivel
01-585-2062
Pipe To Tube Swivel Joint
Used on cat i and cat ii mrap. 1/4 inch tube x 1/4 npt; swivel
01-585-2156
Multiple Fluid Pressur Connector
Fitting, adjustable elbow
01-585-2161
Tube Tee
Used on huey h1 upgrade kit. fitting assembly, tee, reducer anodize body surface treated tee unj 1st end thread series
01-585-2213
Pipe Elbow
Used on 6115-01-431-3063. elbow nptf 1st end thread series
01-585-2228
Straight Pipe To Tube Adapter
Used on 4110-01-534-7675, mobile int coll sys. adapter, barbed x threaded pvc male flareless w/ offset wrenching facility
01-585-2267
Pipe Tee
Used on 6115-01-533-1520. joint, t-pipe
01-585-2276
Pipe Elbow
Used on 4110-01-534-7675, mobile int coll sys. 90 deg elbow, male x female for steam, pressure is 1560 psi at 300 deg f elbow npt 2nd end thread series
01-585-2335
Hose Tee
Used on 4110-01-534-7675 mobile int coll sys. black nylon single-barbed tee for 5/8 inch tube/hose
01-585-2356
Pipe Bushing
Used on 4110-01-534-7675, mobile int coll sys. low-pressure threaded pipe fitting male 1/2 in x female 1/4 in hex reducing bushing use standard wall (schedule 40) brass threaded outside hexagon
01-585-2364
Pipe To Tube Elbow
Used on 4110-01-534-7675, mobile int coll sys. 32 2nd end thread quantity per inch barbed tube fitting to male pipe npt 2nd end thread series
01-585-2428
Pipe Coupling
Used on 4930-01-517-6939; tank unit, fuel dispensing, truck mounting. coupling-4 in, mark i, al nha discharge piping asm 1 inch pump
01-585-2461
Quick-disconnect Nipple
Single handed operation nickel surface treated nipple
01-585-2508
Straight Flange To Pipe Adapter
01-585-2514
Tube Cap
Used on navy code 950026865.
01-585-2550
Hose To Boss Elbow
Used on 3805-01-573-0677; excavator, multipurpose, end crawler mounted. elbow fitting (sub for 61M5027) nha oil filter
01-585-2581
Hose Coupling
Used on 4110-01-534-7675 mobile int coll sys. black nylon single-barbed coupling for 1/2 inch id hose
01-585-2644
Straight Tube To Boss Adapter
01-585-2646
Pipe To Tube Tee
01-585-2893
Tube Tee
16 all ends thread quantity per inch tee un all ends thread series
01-585-2910
Tube Tee
Used on used for uh-1y upgrade; uh-1 huey helicopter. 12 1st end thread quantity per inch fitting assembly, tee, nonreducer, internal flare on run, to flared tube anodize body surface treated tee unj 1st end thread series
01-585-2948
Hose Clamp
Used on nsn 3805-01-573-0677 excavator,multipurpose,crawler mounted. clamp (sub for 4411911)
01-585-2960
Hose Clamp
Used on nsn3805-01-573-0677 excavator,multipurpose,crawler mounted. clamp (sub for 4190273)
01-585-2971
Hose Clamp
Used on nsn 3805-01-573-0677 excavator,multipurpose,crawler mounted. clamp (sub for 4190265)
01-585-3114
Hose To Boss Elbow
01-585-3140
Hose To Boss Elbow
01-585-3198
Pipe Bushing
Used on 4110-01-534-7675. utility grade bushing 1/2" x 3/8" application:used with water, air, oil, natural gas & liquefied petroleum products; working pressure:2000 psi; temperature range: -65f to +250f N1 outside hexagon or octagon (partial or full thread optional)
01-585-3217
Straight Pipe To Hose Adapter
Used on 4110-01-534-7675. insert npsm 2nd end thread series
01-585-3249
Pipe Nipple
Used on nsn 4930-01-517-6939 tank unit,fuel dispensing,truck mounting. bushing, pipe
01-585-3315
Quick Disconnect Coupling Half
Used on nsn 6640-01-547-7160 petroleum quality analysis system. conntector half, quick
01-585-3316
Hose Clamp
Used on 2320-01-565-3428. 64.0mm inside diameter 9.0mm overall width hexagon cross recess head screw clamp, hose, spring type band
01-585-3355
Hose Clamp
Used on 2320-01-565-3428. 30.0mm inside diameter 9.0mm overall width hexagon cross recess head screw clamp, hose, spring type band
01-585-3558
Air Inflating Chuck
Large bore inflation gauge with dual foot air chucks unit with in-line gauge; equipped with h-4660a chuck
01-585-3653
Tube Tee
Used on used for the uh-1y upgrade; uh-1 huey helicopter. 12 1st end thread quantity per inch fitting assembley, tee, nonreducer, internal flare on run, to flared tube anodize body surface treated tee unj 1st end thread series
01-585-3675
Pipe Bushing
Used on process tank assembly. low pressure aluminum pipe fitting aluminum type 6061-T6 outside hexagon
01-585-3715
Tube To Boss Elbow
Used on nsn 4930-01-517-6939 tank unit,fuel dispensing,truck mounting. 20 all ends thread quantity per inch compression tube fittings male pipe 90 deg elbow, compression fitting type - double-sleeved compression, double-sleeved compression type - yor-lok, outside tube diameter - .375 in, tube wall thickness 0.035 in, pipe thread npt male, pipe size .250 in, max pressure 2, 680 psi, operating temperature range -425 deg to +1200 deg f, body unf all ends thread series
01-585-3734
Filler Cap Adapter Assembly
Used on svts262 tester, cooling system. cap test adapter
01-585-3765
Hose Bulkhead Connector
01-585-3853
Pipe Flange
Used on mercury, bravo 2x tx0. flange, pipe
01-585-3918
Tube Cap
Used on 4130-01-562-9914;large field refrigerant system. cap
