01-468-5339
Hose Elbow
Used on waste water out elbow in the aqua-chem model 3k rowpu, nsn 4610-01-219-8707, tm10-4610-232-24p,figure 116 item 4. working pressure 1000 psi; size 2 nps; elbow, waste out
01-468-5415
Union Tailpiece
01-468-5507
Sediment Strainer
01-468-5525
Distribution Water Nozzle
01-468-5591
Quick Disconnect Coupling Half
Part of 20-100 pressure test set; used as: adapter assembly
01-468-5595
Tube Nipple
Used on lav apc chassis. female bulkhead union o.250 in. female thread nickel surface treated unf 1st end thread series
01-468-5770
Pipe Plug
Used on gear assembly; wsd: nimitz class cvn. information from document number 1140G14at, cvn self-enclosed turning gear, it states the drain plug has been positioned at the lowest point available, as locted in zone c-7, sheet 1
01-468-5786
Quick Disconnect Coupling Half
01-468-5902
Boss Coupling
01-468-5917
Fluid Flow Restrictor
Used on axial piston; w/s: arleigh burke class ddg. orifice: 0.0625
01-468-5995
Straight Pipe To Hose Adapter
Reusable male 1/4 in npt connector
01-468-6043
Spray Fluid-emulsion Nozzle
01-468-6223
Self-sealing Coupling Half
01-468-6253
Self-sealing Coupling Half
01-468-6280
Sediment Strainer Element
Used on watermaker, re. mesh screen, 60, monel, 0.750"
01-468-6289
Self-sealing Coupling Half
Used on launcher, rocket, armoured vehicle moun, 1055-01-450-4243, 13213300, 18876. 3a all ends thread class 18 all ends thread quantity per inch coupling half, self-sealing hydraulic anodize body surface treated male coupling half unjf all ends thread series
01-468-6291
Pipe Coupling
01-468-6294
Fluid Flow Restrictor
Used on distillation plant, fresh water. orifice for feed water line
01-468-6303
Distribution Water Nozzle
Used on eye/face wash w/ss small bowl shower w/pull chain & hf0. nozzel outlet assy
01-468-6312
Sediment Strainer Element
Used on 2350-01-368-9528, carrier, command post, 8750292, 1920. strainer element, sediment material: screen cloth wire industrial, comp steel or stainless steel or brass or bronze; cone metal expanded steel or steel carbon; zinc coating conical
01-468-6341
Hose Plug
Used on p/n 7245959, suba bacs. plug, cga
01-468-6488
Tube Union
2a 1st end thread class cadmium surface treated unf 1st end thread series
01-468-6489
Tube Reducer
Cadmium surface treated unf 1st end thread series
01-468-6490
Straight Pipe To Tube Adapter
Za 1st end thread class cadmium surface treated unf 1st end thread series
01-468-7107
Flange To Tube Elbow
Used on 2350-01-368-9528, carrier, command post, 8750292, 19207. 4 1st end bolt hole quantity adapter, scavenger tube, air nha p/N12383064; tube o/a diameter in" 2.500, wall thickness 0.490, o/a length 7.300; 24000 psi ys
01-468-7108
Adapter And Flange Assembly
Used on carrier, command post 2350-01-368-9528, 8750292, 19207. flange, attachment, filler neck cap nha p/n 12383070; material astm A569, A369, or A109; finish type ii, class 2; media diesel fuel; 6 mounting holes diameter in" 0.250 0.336 zinc surface treated
01-468-7109
Hose Clamp
Used on landing craft air cushion. 56.400" inside diameter 0.750" overall width t-bolt silver nut surface treated band
01-468-7127
Clamp Kit Fastener
01-468-7214
Fluid Flow Restrictor
01-468-7216
Fluid Flow Restrictor
01-468-7218
Fluid Flow Restrictor
01-468-7220
Fluid Flow Restrictor
01-468-7250
Sediment Strainer Element
Used on chiller compressor.
01-468-7266
Straight Tube To Boss Adapter
01-468-7271
Pipe Anchor And Reinforcem Clamp
01-468-7390
Conical Flared Tube Fitting Seal
Seal
01-468-7490
Hydraulic Swivel Joint
01-468-7625
Fluid Flow Restrictor
Used on slide, directional c. 0.325" outside diameter plug, orifice surface roughness 125 microns all over
01-468-7636
Fluid Flow Restrictor
01-468-8046
Fueling Manifold
Used on chiller compressor.
01-468-8099
Hose Connector Sleeve
Used to secure soft plastic or rubber tubing to hose connections
01-468-8163
Tube Union
Used on ch/hh-53 helicopters. manufacturer suggested name: adapter, bleed valve hydraulic system, engine start; make from AN832-16v or AN832-16k
01-468-8167
Quick Disconnect Coupling Half
Shank coupler type c, female camlok, black polypropylene c/w stainless steel cam arms, 1 in.
01-468-8168
Quick Disconnect Coupling Half
Shank coupler type c, female camlok, black polypropylene c/w stainless steel cam arms, 1 1/2 in.
01-468-8171
Quick Disconnect Coupling Half
Shank coupler type c, female camlok, black polypropylene c/w stainless steel cam arms, 3/4 in.
01-468-8172
Quick Disconnect Coupling Half
Shank adaptor type e, male camlok, black polypropylene, 3/4 in.
01-468-8173
Quick Disconnect Coupling Half
Shank adaptor type e, male camlok, black polypropylene, 2 in.
01-468-8177
Quick Disconnect Coupling Half
Shank adaptor type e, male camlok, black polypropylene, 1 1/2 in.
01-468-8178
Quick Disconnect Coupling Half
Shank coupler type c, female camlok, black polypropylene c/w stainless steel cam arms, 2 in.
