01-428-6935
Nonmetallic Hose Assembly
Used on 2320-01-354-3382; an/alq-147(v) countermeasure set. 2b 2nd end thread class right-hand 2nd end 0.500" inside diameter 0.906" outside diameter unf 1st end thread series
01-428-6936
Nonmetallic Hose Assembly
Used on 2320-01-354-4528; an/alq-147(v) countermeasure set. 2b 2nd end thread class right-hand 2nd end 0.375" inside diameter 0.625" outside diameter inner conveying tube material-rubber, synthetic unf 1st end thread series
01-428-6937
Nonmetallic Hose Assembly
Used on 2320-01-354-4528; an/alq-147(v) countermeasure set. 2b 2nd end thread class right-hand 2nd end 0.500" inside diameter 0.906" outside diameter unf 1st end thread series
01-428-6938
Nonmetallic Tubing Assembly
Used on the support equipment (se), b-2 bomber aircraft. 2a 1st end thread class right-hand 1st end 0.375" inside diameter 0.500" outside diameter fitting has a u-shaped bar that attached to valve when open for draining, u/w detector unjf 1st end thread series
01-428-6939
Nonmetallic Hose Assembly
Used on 2320-01-354-3385; truck,family of medium tactical vehicle(fmtv). right-hand 1st end 0.250" inside diameter 0.690" outside diameter npt 1st end thread series
01-428-6944
Nonmetallic Hose Assembly
Used on w/s code, arleigh burke class ddg. 3.000" inside diameter 3.500" outside diameter 8 1st end bolt hole quantity two hose assemblies connected by 90 degree elbow, first
01-428-6945
Nonmetallic Hose Assembly
Used on w/s code, arleigh burke class ddg. 3.000" inside diameter 3.500" outside diameter 6 1st end bolt hole quantity two hose assemblies connected by 90 degree elbow, first leg lg is 42", second leg is 41"
01-428-6946
Nonmetallic Hose Assembly
01-428-6976
Nonmetallic Hose Assembly
Used on strategic sealift conversion ships class. 3b 1st end thread class right-hand 2nd end 0.188" inside diameter 0.312" outside diameter npt 2nd end thread series
01-428-6977
Nonmetallic Hose Assembly
Used on strategic sealift conversion ships class. 3b 1st end thread class right-hand 2nd end 0.188" inside diameter 0.312" outside diameter npt 2nd end thread series
01-428-7022
Nonmetallic Hose
Used on 1040-01-380-1400.
01-428-8768
Nonmetallic Hose Assembly
01-428-9691
Nonmetallic Hose Assembly
01-428-9692
Nonmetallic Hose Assembly
01-428-9708
Preformed Hose
Used on shipboard material handling equipment (mhe). continuous curve
01-428-9728
Nonmetallic Hose
Used on w/s code, strategic sealift conversion ships class.
01-428-9729
Nonmetallic Hose
Used on w/s code, strategic sealift conversion ships class.
01-428-9730
Nonmetallic Hose
Used on w/s code, strategic sealift conversion ships class.
01-428-9731
Nonmetallic Hose
Used on w/s code, strategic sealift conversion ships class.
01-428-9732
Nonmetallic Hose
Used on w/s code, strategic sealift conversion ships class.
01-428-9733
Nonmetallic Hose
Used on w/s code, strategic sealift conversion ships class.
01-428-9760
Nonmetallic Hose Assembly
01-428-9761
Nonmetallic Hose Assembly
01-428-9762
Nonmetallic Hose Assembly
01-428-9766
Nonmetallic Hose Assembly
01-428-9822
Nonmetallic Hose Assembly
Used on the strategic sealift conversion ships class. 1.000" inside diameter
01-428-9831
Preformed Hose
Used on shipboard material handling equipment (mhe). single bend
01-428-9833
Preformed Hose
Used on the shipboard material handling equipment (mhe). bendu
01-428-9848
Nonmetallic Hose Assembly
01-428-9851
Air Duct Hose
01-428-9852
Air Breathing Hose Assembly
Used on c17 acft.,mcdonnell douglas. 0.500" first end inside diameter anodize both end couplings surface treated fully convoluted w/ wire rings between convolutions unjf both ends thread series
01-428-9853
Air Duct Hose
Used on aircraft,airlifter c-17a. 7.000" first end inside diameter sleeve section
01-428-9855
Nonmetallic Hose Assembly
Used on 3930-01-384-5310. 2b 2nd end thread class right-hand 2nd end 0.250" inside diameter 0.557" outside diameter 16 1st end thread quantity per inch un 1st end thread series
01-428-9856
Nonmetallic Hose Assembly
Used on 3930-01-384-5310. 2b 2nd end thread class right-hand 2nd end 0.250" inside diameter 0.557" outside diameter 16 1st end thread quantity per inch un 1st end thread series
01-428-9857
Air Duct Hose
01-428-9858
Nonmetallic Hose Assembly
Used on 3930-01-384-5310. 2b 2nd end thread class right-hand 2nd end 0.242" inside diameter 0.557" outside diameter 16 1st end thread quantity per inch un 1st end thread series
01-428-9859
Nonmetallic Hose Assembly
Used on truck,family of medium tacticle vehicle(fmtv). right-hand 1st end 0.250" inside diameter 0.690" outside diameter inner conveying tube material-rubber, synthetic npt 1st end thread series
01-428-9860
Nonmetallic Hose Assembly
Used on the aircraft, b-2 bomber. 3b 2nd end thread class right-hand 2nd end 0.220" inside diameter 0.470" outside diameter 24 1st end thread quantity per inch unjs 1st end thread series
01-428-9863
Nonmetallic Hose Assembly
Used on 2320-01-354-3382; truck, family of medium tactical vehicle (fmtv) medium. 2b 2nd end thread class right-hand 2nd end 0.469" inside diameter 0.844" outside diameter inner conveying tube material-rubber, synthetic unf 1st end thread series
01-428-9922
Preformed Hose
Used on shipboard material handling equipment (mhe). 25.4mm inside diameter two bend modified "u"
01-428-9930
Nonmetallic Hose Assembly
Used on preprovisioning support navicp is poe.
01-428-9983
Metallic Hose Assembly
Used on preprovisioning support navicp is poe.
01-429-1361
Preformed Hose
Used on shipboard material handling equipment (mhe). u/o 1995 sedan, beretta/corsica; radiator inlet hose two bend
01-429-2268
Preformed Hose
01-429-3304
Nonmetallic Hose Assembly
01-429-3335
Preformed Hose
Used on sedan,compact 1995 beretta/corsica; shipboard material handling equipment (mhe). y-shaped; radiator outlet hose
01-429-3337
Nonmetallic Hose Assembly
Used on sedan, compact, 1993-1994 beretta/corsica, cheverolet; shipboard material handling equipment (mhe). includes: seal, 2, part number 26001694
01-429-3338
Nonmetallic Hose Assembly
Used on sedan, compact, 1993-1995 chevrolet beretta/corsica; shipboard material handling equipment (mhe).
01-429-3349
Nonmetallic Hose
Used on propulsion system. u/o b-series engine
01-429-3384
Nonmetallic Hose Assembly
Used on engine test stand. 3b 1st end thread class right-hand 1st end 0.313" inside diameter 0.672" outside diameter 18 1st end thread quantity per inch unj 1st end thread series
