00-155-2850
Nonmetallic Hose Assembly
2b 1st end thread class right-hand 1st end 0.500" inside diameter 0.630" outside diameter 14 1st end thread quantity per inch uns 1st end thread series
00-155-2956
Nonmetallic Hose Assembly
3b 2nd end thread class right-hand 2nd end 0.188" inside diameter 0.312" outside diameter with external support chafe guards unjf 2nd end thread series
00-155-2957
Nonmetallic Tubing
0.500" inside diameter 1.125" outside diameter 5/16 in. wall thk; corrosion resistant; media for which designed: propane
00-155-4208
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.406" inside diameter 0.562" outside diameter 2 2nd end bolt hole quantity inner conveying tube material-plastic, polytetrafluoroethylene unf 1st end thread series
00-155-4768
Air Duct Hose
2.250" first end inside diameter sleeve section
00-155-4784
Nonmetallic Hose Assembly
3b 2nd end thread class right-hand 2nd end 0.250" inside diameter 0.535" outside diameter 20 2nd end thread quantity per inch unf 1st end thread series
00-155-4785
Nonmetallic Hose Assembly
3b 2nd end thread class right-hand 2nd end 0.250" inside diameter 0.547" outside diameter unf 1st end thread series
00-155-4795
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.500" inside diameter 0.968" outside diameter 16 1st end thread quantity per inch unf 1st end thread series
00-155-4817
Air Duct Hose
3.000" first end inside diameter helically wound continous wire supported
00-155-4818
Air Duct Hose
3.000" first end inside diameter helically wound continous wire supported
00-155-4819
Air Duct Hose
2.000" first end inside diameter helically wound continous wire supported
00-155-4820
Air Duct Hose
5.500" first end inside diameter all fabric diagonally laid helically wound continous wire supported
00-155-5673
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.781" inside diameter 1.078" outside diameter 12 1st end thread quantity per inch unj 1st end thread series
00-155-7113
Nonmetallic Hose
0.500" inside diameter 0.812" outside diameter
00-155-7115
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.212" inside diameter 0.507" outside diameter unjf 1st end thread series
00-155-7289
Preformed Hose
00-155-8048
Nonmetallic Tubing
0.362" inside diameter 0.562" outside diameter
00-155-8133
Nonmetallic Hose
1.000" inside diameter 1.725" outside diameter
00-156-4896
Nonmetallic Hose Assembly
Used on gas turbine engine. hose assembly
00-156-9932
Metallic Hose
1.500" inside diameter two 0.187 in. dia holes in direct line of each other, 0.500 in. from oneend
00-157-4919
Nonmetallic Hose
Used on 16 in elevating gear.
00-157-9555
Nonmetallic Hose Assembly
Used on grumman; a10 aircraft. 2b 1st end thread class right-hand 1st end 0.250" inside diameter 0.500" outside diameter unf 1st end thread series
00-158-0016
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.562" inside diameter 0.797" outside diameter unf 1st end thread series
00-158-0943
Preformed Hose
0.375" inside diameter two bend modified "u"
00-158-1228
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 2nd end 0.250" inside diameter 0.580" outside diameter 18 2nd end thread quantity per inch reusable fittings nptf 2nd end thread series
00-158-1297
Preformed Hose
1.750" inside diameter longest leg offset upwards 0.500 in. single bend
00-158-1310
Nonmetallic Hose Assembly
2b 1st end thread class right-hand 1st end 0.500" inside diameter 0.875" outside diameter unf 1st end thread series
00-158-9980
Air Duct Hose
5.000" first end inside diameter helically wound continous wire supported
00-158-9989
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.406" inside diameter 0.562" outside diameter unjf 1st end thread series
00-159-6675
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 2nd end 0.375" inside diameter 0.625" outside diameter inner conveying tube material-rubber npt 2nd end thread series
00-159-6824
Metallic Hose Assembly
1.445" inside diameter 2.100" outside diameter
00-159-8267
Nonmetallic Hose
1.250" inside diameter
00-159-8277
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.391" inside diameter 0.630" outside diameter unjf 1st end thread series
00-159-8598
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.298" inside diameter 0.455" outside diameter unjf 1st end thread series
00-160-8604
Nonmetallic Hose Assembly
00-160-9029
Nonmetallic Tubing
0.187" inside diameter 0.280" outside diameter
00-160-9136
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.219" inside diameter 0.625" outside diameter unjf 1st end thread series
00-160-9649
Nonmetallic Hose
0.375" inside diameter 0.688" outside diameter
00-160-9753
Nonmetallic Hose Assembly
3a 2nd end thread class right-hand 2nd end 0.120" inside diameter 0.250" outside diameter w/90 deg elbow bulkhead fitting unf 2nd end thread series
00-161-7579
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.344" inside diameter 0.547" outside diameter unjf 1st end thread series
00-161-7581
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.688" inside diameter 0.938" outside diameter 12 1st end thread quantity per inch unf 1st end thread series
00-161-7582
Nonmetallic Hose Assembly
3b 2nd end thread class right-hand 2nd end 0.688" inside diameter 0.938" outside diameter 12 1st end thread quantity per inch unf 1st end thread series
00-161-7585
Nonmetallic Hose Assembly
Right-hand 1st end 0.250" inside diameter 0.531" outside diameter nptf 1st end thread series
00-161-7592
Nonmetallic Hose Assembly
00-161-7608
Preformed Hose
5.000" inside diameter continuous curve
00-161-7615
Nonmetallic Hose Assembly
Left-hand 2nd end 0.250" inside diameter 0.690" outside diameter furnished with special straight gas cylinder fitting with strainer screen on one end, and with special elbow gas cylinder fitting with strainer screen ngo 1st end thread series
00-161-7628
Nonmetallic Hose Assembly
3b 2nd end thread class right-hand 2nd end 0.562" inside diameter 1.703" outside diameter sleeve, bullet sealing rubber covered with a rubber impregnated fiber wrap unjf 2nd end thread series
00-161-7629
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.562" inside diameter 1.703" outside diameter sleeve, bullet sealing rubber covered with a rubber impregnated fiber wrajp unjf 1st end thread series
00-161-7642
Nonmetallic Hose
00-161-7644
Preformed Hose
1.500" inside diameter two bend
