01-220-9632
Nonmetallic Hose Assembly
01-220-9887
Nonmetallic Hose Assembly
Used on international harvester 1980 truck bus. 0.125" inside diameter for drum brake application
01-220-9888
Nonmetallic Hose Assembly
Used on harnischfeger hydraulic crane,25 ton. 0.406" inside diameter
01-220-9890
Nonmetallic Hose Assembly
2b 1st end thread class right-hand 1st end 0.875" inside diameter 1.203" outside diameter 12 1st end thread quantity per inch weapon system essential un 1st end thread series
01-220-9939
Air Duct Hose
01-221-0594
Nonmetallic Hose Assembly
01-221-0775
Nonmetallic Hose Assembly
Used on 2320011231608.
01-221-0830
Air Duct Hose
8.000" first end inside diameter box section
01-221-1448
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 2nd end 1.000" inside diameter 1.560" outside diameter 12 1st end thread quantity per inch npt 2nd end thread series
01-221-1449
Nonmetallic Hose Assembly
2b 1st end thread class right-hand 1st end 0.875" inside diameter 1.203" outside diameter 12 1st end thread quantity per inch un 1st end thread series
01-221-1450
Nonmetallic Hose Assembly
2b 1st end thread class right-hand 1st end 0.875" inside diameter 1.203" outside diameter 12 1st end thread quantity per inch un 1st end thread series
01-221-1451
Nonmetallic Hose Assembly
2b 1st end thread class right-hand 1st end 0.875" inside diameter 1.203" outside diameter 12 1st end thread quantity per inch weapon system essential un 1st end thread series
01-221-1452
Nonmetallic Hose Assembly
0.250" inside diameter 0.500" outside diameter
01-221-2067
Nonmetallic Hose Assembly
2b 1st end thread class right-hand 1st end 0.875" inside diameter 1.203" outside diameter 12 1st end thread quantity per inch weapon system essential un 1st end thread series
01-221-2068
Nonmetallic Hose Assembly
Used on 2350-00-808-7100. 2b 1st end thread class right-hand 1st end 1.500" inside diameter 2.250" outside diameter 12 1st end thread quantity per inch un 1st end thread series
01-221-2219
Preformed Hose
01-221-2221
Preformed Hose
Lower radiator two bend
01-221-3192
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.375" inside diameter 0.781" outside diameter unf 1st end thread series
01-221-3193
Nonmetallic Hose Assembly
01-221-3194
Nonmetallic Hose Assembly
01-221-3573
Nonmetallic Hose Assembly
01-221-4305
Nonmetallic Hose Assembly
01-221-4306
Nonmetallic Tubing
01-221-4307
Nonmetallic Tubing
01-221-5344
Nonmetallic Hose Assembly
3b 2nd end thread class right-hand 2nd end 0.236" outside diameter unjf 2nd end thread series
01-221-5345
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.236" outside diameter unjf 1st end thread series
01-221-5346
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.205" inside diameter 0.236" outside diameter unjf 1st end thread series
01-221-5351
Air Duct Hose
Used on 4120-01-154-9127( type ma-3,model mad-3d ). t.o.35e9-9-64 f.6 i.83. 10.620" first end inside diameter ambient operating range: from 0 deg. f to 140 deg. f; also, stored at: -65 deg. f to +160 deg. f. environmental exposure: 1) the flexible duct shall be capable of conforming to all requirements specified herein after exposure to the following environmental conditions: a) ambient temperature of -65 deg. f to +160 deg. f. b) radiant energy as found under natural conditions. c) salt spray as may be encountered in salt-sea atmosphere. d) fungus growth as may be encountered intropical climate. e) rainfall as encountered in any locate. f) sand sleeve section
01-221-5559
Nonmetallic Hose Assembly
01-221-5561
Nonmetallic Hose Assembly
2b 1st end thread class right-hand 1st end 0.875" inside diameter 1.203" outside diameter 12 1st end thread quantity per inch weapon system essential un 1st end thread series
01-221-5562
Nonmetallic Hose Assembly
3b 2nd end thread class right-hand 2nd end 0.188" inside diameter 0.312" outside diameter unf 1st end thread series
01-221-5563
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.438" inside diameter 0.641" outside diameter unf 1st end thread series
01-221-5564
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.344" inside diameter 0.547" outside diameter unjf 1st end thread series
01-221-5565
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.344" inside diameter 0.547" outside diameter unjf 1st end thread series
01-221-5772
Preformed Hose
01-221-5773
Preformed Hose
Single bend
01-221-6313
Nonmetallic Hose Assembly
01-221-6520
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.391" inside diameter 0.500" outside diameter unjf 1st end thread series
01-221-7331
Nonmetallic Hose Assembly
0.125" inside diameter 0.500" outside diameter
01-221-7333
Nonmetallic Hose
0.625" inside diameter
01-221-7760
Nonmetallic Hose
Used on john deere backhoe model 302-a and backhoe loader model 300-b.
01-221-8867
Nonmetallic Hose Assembly
01-221-8868
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.312" inside diameter 0.609" outside diameter unjf 1st end thread series
01-221-8869
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.250" inside diameter 0.375" outside diameter unf 1st end thread series
01-221-8870
Nonmetallic Hose
0.625" inside diameter 0.940" outside diameter
01-221-8871
Nonmetallic Tubing
0.250" inside diameter 0.375" outside diameter
01-221-8883
Air Duct Hose
1.000" first end inside diameter helically wound continous wire supported
01-221-9254
Nonmetallic Hose Assembly
0.236" outside diameter
01-222-0246
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.188" inside diameter 0.484" outside diameter unjf 1st end thread series
01-222-0247
Nonmetallic Hose Assembly
3b 1st end thread class right-hand 1st end 0.188" inside diameter 0.312" outside diameter unjf 1st end thread series
