01-486-9159
Air Duct Air Breathing Hose
Used on f-22 acft. hose, breathing
01-486-9161
Air Breathing Hose
Used on f-22 aircraft. hose, breathing
01-486-9162
Metallic Hose Assembly
Used on f-22 acft.
01-486-9688
Nonmetallic Hose Assembly
Used on c-130 transport aircraft. 3b 1st end thread class right-hand 1st end 0.343" inside diameter 0.766" outside diameter 112 flareless hose assemblies reinforced by two or more high tensile steel wire braids; cover material is synthetic rubber; used with hydraulic systems, air, or inert gas; for gaseous service, cover should be perforated; socket fitting material is s.a.e. 2024-T6 material unf 1st end thread series
01-486-9705
Nonmetallic Hose Assembly
Used on kc-135 aircraft (all). 3b 1st end thread class right-hand 1st end 1.375" inside diameter 1.750" outside diameter 4 2nd end bolt hole quantity 12 1st end thread quantity per inch hose assembly-defueling valve, manual un 1st end thread series
01-486-9922
Nonmetallic Hose Assembly
Used on use on miscellaneous equipment for air supply to air powered tools. 0.500" inside diameter air hose assembly consists of a 50 ft hose with two 1/2" male npt crimped fittings with one male qd (HSN5500) ,
01-486-9989
Nonmetallic Tubing
Used on small boat. 5.704" inside diameter 6.000" outside diameter marine wet exhaust tubing use for marine wet exhaust systems only; fire resistant; media for which designed: wet exhaust, gasoline or diesel engines
01-487-0059
Nonmetallic Hose
Used on 24 ft. craft. 0.500" inside diameter 0.736" outside diameter
01-487-0067
Nonmetallic Tubing
0.080" inside diameter 0.144" outside diameter tubing, polyurthane
01-487-0184
Nonmetallic Hose Assembly
Used on f-22 aircraft. hose, anti-g
01-487-0530
Air Duct Hose
0.750" first end inside diameter duct air flexible cuffs 1 inch
01-487-0536
Air Duct Hose
0.750" first end inside diameter duct air flexible cuffs 1 inch
01-487-0538
Air Duct Hose
1.000" first end inside diameter duct air flexible cuffs 1 inch
01-487-0799
Nonmetallic Hose Assembly
Used on gen. set ag914;arleigh burke class ddg. 2b 1st end thread class right-hand 1st end 0.750" inside diameter 1.070" outside diameter 12 1st end thread quantity per inch un 1st end thread series
01-487-0849
Nonmetallic Hose Assembly
Used on brake hose, boeing 727.
01-487-1106
Nonmetallic Hose Assembly
Used on gen. set ag914;arleigh burke class ddg. 2b 2nd end thread class right-hand 2nd end 1.000" inside diameter 1.340" outside diameter 12 1st end thread quantity per inch un 1st end thread series
01-487-1119
Nonmetallic Hose Assembly
Used on gen. set ag914;arleigh burke class ddg. 2b 1st end thread class right-hand 1st end 0.500" inside diameter 0.760" outside diameter 16 1st end thread quantity per inch un 1st end thread series
01-487-1133
Nonmetallic Hose Assembly
Used on gen. set ag914;arleigh burke class ddg. 2b 1st end thread class right-hand 1st end 0.500" inside diameter 0.760" outside diameter 16 1st end thread quantity per inch un 1st end thread series
01-487-1155
Nonmetallic Hose Assembly
Used on gen. set ag914;arleigh burke class ddg. 2b 1st end thread class right-hand 1st end 0.750" inside diameter 1.070" outside diameter 12 1st end thread quantity per inch un 1st end thread series
01-487-1177
Nonmetallic Hose Assembly
Used on gen. set ag914;arleigh burke class ddg. 2b 1st end thread class right-hand 1st end 0.750" inside diameter 1.070" outside diameter 12 1st end thread quantity per inch un 1st end thread series
01-487-1180
Nonmetallic Hose Assembly
Used on gen. set ag914;arleigh burke class ddg. 2b 1st end thread class right-hand 1st end 0.750" inside diameter 1.070" outside diameter 12 1st end thread quantity per inch un 1st end thread series
01-487-1185
Nonmetallic Hose Assembly
Used on gen. set ag914;arleigh burke class ddg. 2b 2nd end thread class right-hand 2nd end 0.750" inside diameter 1.070" outside diameter 12 1st end thread quantity per inch un 1st end thread series
01-487-1445
Nonmetallic Hose Assembly
Used on nssn class submarine; nha: lpt and wst 30 inch lower hatch-dwg no. 7066805. right-hand 1st end 0.380" inside diameter 0.570" outside diameter heavy duty rubber hose (900-series) , flexible with little "memory", is the best choice for long hose runs npt 1st end thread series
01-487-1947
Nonmetallic Tubing
Used on johnson outboard motors models 1991-1993, 30-200hp. sleeve sleeve used to accommodate large size wire on assembly p/n 175099; sleeve used on cable assembly p/n 175282; sleeve used on oil tank assemblies 1.8 gallon
01-487-1967
Nonmetallic Hose
Used on power washer for mk 74 mod 1,vems. 0.367" inside diameter 0.750" outside diameter 50 feet of high pressure hose blue cover is non-marking
01-487-2152
Nonmetallic Tubing
Used on 2320014173180.
01-487-2156
Nonmetallic Tubing
Used on 2320014173180.
01-487-2157
Metallic Hose
Used on 2320014173180.
01-487-2161
Nonmetallic Hose Assembly
Used on am-7491/spy-1d(v) ddg91&up,amplifier,radio freq;aegis spy-1d(v) internal use apl. n/a for cosal. 0.380" inside diameter 0.650" outside diameter (drawing) hose assembly, non metallic-silicone rubber items are being coded as critical to insure source inspection will be performed at the point of manufacture, prior to material receipt by the us navy or other dod components. these items are piece parts or end items in support of vital military hardware necessary to sustain the successful mission of the ships, submarines,
01-487-2162
Nonmetallic Tubing
Used on 2320014173180.
01-487-2164
Nonmetallic Hose Assembly
Used on am-7491/spy-1d(v) ddg91&up, amplifier, radio freq;aegis spy-1d(v) internal use apl. n/a for cosal. 0.380" inside diameter 0.650" outside diameter items are being coded as critical to insure source inspection will be performed at the point of manufacture, prior to material receipt by the us navy or other dod components. these items are piece parts or end items in support of vital military hardware necessary to sustain the successful mission of the ships, submarines,
01-487-2169
Nonmetallic Hose Assembly
Used on am-7491/spy-1d(v) ddg91&up,amplifier,radio freq;aegis spy-1d(v) internal use apl n/a for cosal. 1.000" inside diameter 1.300" outside diameter items are being coded as critical to insure source inspection will be performed at the point of manufacture, prior to material receipt by the us navy or other dod components. these items are piece parts or end items in support of vital military hardware necessary to sustain the successful mission of the ships, submarines,
01-487-2570
Nonmetallic Hose
Used on emergency generator set 800 kw.
01-487-2574
Nonmetallic Hose
Used on emergency generator set 800 kw.
01-487-2575
Nonmetallic Hose
Used on emergency generator set 800 kw.
01-487-2576
Nonmetallic Hose
Used on emergency generator set 800 kw.
01-487-2579
Nonmetallic Hose
Used on emergency generator set 800 kw.
01-487-2580
Nonmetallic Hose
Used on emergency generator set 800 kw.
01-487-2663
Metallic Hose
Used on f-22 aircraft. hose, thermal
01-487-2828
Nonmetallic Hose Assembly
Used on nha 3301331-6101;aircraft f-16. hose assembly, flowmeter assy consists of reducer, hose 3307269-1 (1) ; clamp, hose 3308166-3 (2) ; tubing, reinforced
01-487-3108
Nonmetallic Hose Assembly
Hose assembly, flowmeter 6consists of tape, antiseize 1613341-2 (a/r) , nut 3303800-3 (1) , ferrule, front 3303801-3 (1) , ferrule, back 3303802-3 (1) , clamp, hose 3308166-3 (2) , tubing, reinforced 3308193-3 (a/r) , adapter, straight, hose 3308693-2 (1) , adapter, tube 3308987-1 (1)
01-487-3507
Nonmetallic Tubing
Used on attack aircraft. thermofit tubing
01-487-3780
Nonmetallic Tubing
0.074" outside diameter
01-487-4148
Nonmetallic Hose
Used on outboard, motor. hose connects to the oil inlet connector
01-487-4149
Nonmetallic Hose
Used on outboard, motor. hose connects to the vapor separator to fuel pump
01-487-4151
Nonmetallic Hose
Used on outboard, motor. hose connects to the fuel component to manifold port
01-487-4155
Nonmetallic Hose
Used on outboard, motor. hose connects to the crankcase to vapor pump
01-487-4156
Nonmetallic Hose
Used on outboard, motor. hose connects to fuel inlet connector to fuel pump
01-487-4161
Nonmetallic Hose
Used on outboard, motor. hose connects to a fuel component bracket to the starboard fuel manifold
01-487-4162
Nonmetallic Hose
Used on outboard, motor. drain hose 3/16"; supersedes p/n 772574 hose
