Serving our customers with quality and safety first.
round
2b 1st end
RIGHT-Hand 1st end
swivel nut flare 1st end
straight 1st end
complete fitting steel all ends
threaded internal tube 1st end
37.0 degrees 1st end
73.000in. excluding end fittings
u/o peacekeeper mgcs; c/o hose 235-6; adapter 52668-717-1; adapter 41578-717-1; 2 couplings 4411-6S; coupling 915104; coupling 915106; 2 elbows 6-C6X-ss; 2 seals AP50A-4; 5 seals AP50A-6; seal AP50A-10; tee 6JTX-Ss; reducer 10-6TRBTX-Ss; nut 10BTX-Ss; nut 6BTX-Ss; reducer 6-4TRBTX-Ss; coupling 276-0001-003
unf 1st end
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see hose, nonmetallic. Excludes hose assembly, air duct; and hose assembly, air duct, air breathing.
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Reusable container.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.