00-728-3847
Reciprocating Pump Unit
00-728-7391
Wearing Ring
0.688" overall length
00-728-7419
Pump Centrifugal Impeller
3.000" overall width
00-728-7475
Axial Piston Pump Parts Kit
00-728-7482
Lantern Ring
1.188" inside diameter w/one 1/4 in.hole through periphery
00-728-7661
Rotor And Shaft Pump Assembly
00-728-8182
Pump Rotor
750 gpm
00-728-8440
Wearing Ring
0.812" overall length
00-730-1016
Rotary Pump Parts Kit
Parts kit, pump unit, rotary
00-730-3008
Shaft Spring Loade Seal Assembly
00-730-4012
Reciprocating Pump
00-730-5993
Wearing Ring
1.000" overall length
00-730-9258
Hydraulic Pump
Pump, hydrostatic pressure
00-731-6530
Manual Control Lever
Used on grumman aerospace a-10 aircraft. brass; 4.640 in. lg o/a, 2.218 in. w o/a 1.025 in. thk o/a; 1st end, w/securing hole, 1.312 in. id. w/locking notch, 0.656 in. w by 0.250 in. deep, on outer periphery; 2nd end w/integral hand grip, 1.025 in. od
00-731-6552
Wear Rotary Pump Plate
00-731-9179
Axial Piston Hy Pump Subassembly
Used on pump axial pstn 27.2gpm.
00-731-9182
Transmission Pump Shaft
27.2 gpm
00-732-3644
Pump Centrifugal Impeller
00-732-4620
Pump Centrifugal Impeller
00-732-4622
Pump Centrifugal Impeller
Used on pump ctfgl 35gpm.
00-732-4633
Shaft Pump Sleeve
0.4980" overall length 17c solid, plain, no outside flanges
00-732-4707
Pump Centrifugal Impeller
2.500" overall width
00-732-5203
Wearing Ring
0.292" overall length
00-732-5800
Rotary Pump Unit
00-732-8422
Pump Centrifugal Impeller
00-732-8424
Pump Centrifugal Impeller
2.844" overall width
00-733-1382
Reciprocating Pump Unit
Designed for automotive fuel systems
00-733-1887
Shaft Spring Loade Seal Assembly
Used on brake p/n 10x20x5,hydreco div,new york brake.
00-733-3131
Hydraulic Motor
00-733-5174
Shaft Pump Sleeve
0.5780" overall length 22c solid, external flange one end
00-733-5177
Wearing Ring
0.625" overall length
00-733-5178
Wearing Ring
0.750" overall length
00-733-5180
Shaft Pump Sleeve
0.2500" first hole diameter 3.2500" overall length 17c-2 solid, plain, no outside flanges, interior flange (s) not located at either end
00-733-5940
Hydraulic Ram Hand Driven Pump
00-733-8827
Rotor And Shaft Pump Assembly
Used on starter,inersoll-rand co,model b4rh1sz20bm.
00-733-9093
Shaft Pump Sleeve
3.2500" overall length plain end counterbored, 2.250 in.dia, 1.688 in.deep, and grooved end has 3 tap drilled holes, 0.375 in.-16, nc thd, 0.438 in.lg, located 0.500 in.from end 17c solid, plain, no outside flanges
00-733-9095
Dirt And Liquid Deflector
2b thread class right-hand 1.875" inside diameter 3.500" outside diameter 0.562" material thickness mtg hole located on step at 90.0 deg to bore round, stepped
00-733-9925
Shaft Spring Loade Seal Assembly
