4320014978057
Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
4320-01-497-8057 Specification Set by the OEM (see RNCC code 3)
used aboard 110 ft wpb coast guard vessels
assembly includes 1 assy dxu 4000a brz shaft seal system with compression clips; 1 ea mating flange gasket, 1/16 inch thick BUNA-N with cotton fabric reinforcement, 13.50 inch od x 6.56 inch id with 1.125 inch dia holes in 6 places with 11 inch bcd; 1 each hand held air pump, 90 psi with SCHRADER-Valve attachment; 6 ea hex cap screws, 1 INCH-8 UNC-3A x 3.5 inch lg, 316sst; 12 each flat washers, 1 inch, 316sst; 6 ea locknuts with nylon inserts, 1 inch -8 UNC-3B, MSI7828-16C, 405 monel; 24in. aeroquip fc 234-6 blue hose; 2 each aeroquip sae 37 degree jic swivel hose fittings, 259-441-6S, sst; 1 ea ssp 90 degree male elbow for 3/8 inch tube, 1/4 npt, AJ6Me, sst; 1 ea ssp straight male connector to T-Fitting, 3/8 inch tube, 3/8 npt; AJ6-6C, sst; 1 each ssp female branch tee for 1/2 inch pipe, 3/8 inch npt; ambttf, sst
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Definition Definition of approved item name (AIN): "SEAL ASSEMBLY,SHAFT,SPRING LOADE"
A combination of items used in sealing various rotary shaft equipment. It may include items such as bellows, disk, drive ring, flexible diaphragm, mating ring, o-ring, retainer, seat, sleeve, washer and the like. Excludes seal, plain encased.
Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
Packaging Codes
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
4320-01-497-8057 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Identification Codes
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
