Compressors And Vacuum Pumps - Supply Class (FSC) 4310

4310-01-518-0531

01-518-0531

Reciprocating Compressor Unit

220.0 ac voltage in volts and current type 10.390 by 5.050 inch; 11.7 lbs

4310-01-518-0888

01-518-0888

Intake Air Cleane Filter Element

4310-01-518-0892

01-518-0892

Intake Air Cleane Filter Element

4310-01-518-1102

01-518-1102

Reciprocating Compressor Unit

Two stage splash lubricated air compressor horse power 7.5; 80 gallon vertical tank

4310-01-518-5368

01-518-5368

Reciprocating Compressor Unit

End item: compressor, balast blowing

4310-01-518-6551

01-518-6551

Piston Ring

Used on uss frank cable. pump axial piston use w/crane x sail cap 10000 lbs

4310-01-518-8913

01-518-8913

Pressure Tank

Used on t-6a training aircraft. tank, air, painted

4310-01-519-0710

01-519-0710

Reciprocating Compressor

Compressor ablts water/fuel transfer system w/iso

4310-01-519-1138

01-519-1138

Fluid Filter Assembly

Used on filter ay w/a. filter assembly with auto-drain

4310-01-519-3701

01-519-3701

Rotary Vacuum Pump Unit

10.500" overall length 5.100" overall width name assigned by manufacturer yellow jacket superevac pump 1.5 cfm

4310-01-519-4774

01-519-4774

Valve Spring Retainer Lock

Used on 1920-01-246-6572. retainer, valve passivate surface treated top counterbore-top outer chamfer-bottom flange

4310-01-519-5205

01-519-5205

Intake Air Cleane Filter Element

Used on vacuum sanding system. pre-filter, pkg of three filter media: high efficiency; dop is a .3 micron particle or penetration of 7% rectangular (incl square)

4310-01-519-5796

01-519-5796

Intake Air Cleane Filter Element

Used on vacuum sanding system. 12.000" overall width custom absolute filter, ulpa filter filter media: micro-glass filber/acrylic resin binder; separator material: corrugated 0.0012 thick, 1145 aluminum; frame material: 16ga. galvaneal; sealant material: fire retardant/phosphorous free two part polyurethane; gasket material: seamless urethane foam rectangular (incl square)

4310-01-519-7042

01-519-7042

Reciprocating Compressor

End item eagle-6, a field crash tender

4310-01-519-7047

01-519-7047

Compressor Repair Kit

Used on compressor, carrier corp., model 05k. used on oil pump/bearing head of the vane pump; i.c.o.; drive segment, oil pump; retaining ring, rotor; pump, rotor; head

4310-01-519-8525

01-519-8525

Reciprocating Compressor

Contoured pistons; canted cylinder head group; PP332 mo 32 oil group; PK158 gray paint group

4310-01-520-5298

01-520-5298

Reciprocating Compressor

Compressor type; double single stage, dual piston balanced lift, non-lubricated. drive type: double acting, single, double ended, pre-lubricated, o-ring sealed, pilot operated, continuous cycling. inlet pressure: 2500 psi max with low inlet relay that stops pump automatically when inlet pressure drops below 300 psi. regulated drive pressure: 110 to 120 psi with drive safety relief valve set at 135 psi. discharge pressure: relief valve set at 3, 000 to 3, 250 psi. construction: weather resistant. gases: non-corrosive dry gases such as nitrogen. weight: 65 to 70 pounds. performance: pump shall be able to charge a 1576 cubic inch container to 2100 psi within 30 minutes while using two nitrogen gas cylinders (225 std cubic feet 2265 psi) .

4310-01-520-5813

01-520-5813

Intake Air Cleane Filter Element

Used on fuel group. element, a/cl (part of 1) (ac-delco A1618c) air cleaner high capacity; used on diesel engine, 6.6-1, V8, direct injection, turbo, ho, isuzu duramax

4310-01-520-5838

01-520-5838

Air Compressor Housing

4310-01-520-6794

01-520-6794

Intake Air Cleaner

Used on vacuum sanding system. filter assembly, air

4310-01-520-7065

01-520-7065

Reciprocating Compressor Unit

Used with line of communication/base support system

4310-01-520-7363

01-520-7363

Reciprocating Compressor

Agd-30 pump gas booster standard air drive sections should cycle reliably within an ambient range of negative 4 degrees celsius to positive 65 degrees celsius. average acceptable temperature is 115 degrees celsius.

4310-01-520-7952

01-520-7952

Rotary Vacuum Pump

Used on hapsite-221111, inficon inc. part name assigned by manufacturer - neg getter pump

4310-01-520-7981

01-520-7981

Reciprocating Compressor Unit

Used on am general designed central tire inflation system; end item is high mobility multipurpose wheeled vehicle (hmmwv)

4310-01-520-7988

01-520-7988

Piston Ring

Used on refrigeration unit.

4310-01-520-7996

01-520-7996

Reed Valve

Used on refrigeration unit.

4310-01-520-8595

01-520-8595

Intake Air Cleane Filter Element

Used on vacuum sanding system. filter element, intake air part of dm-104 vacuum; used in filter assembly, p/n 926-050f

4310-01-521-0478

01-521-0478

Air Filter Parts Kit

Air filter kit kit consists of: 4pcs stud, threaded rod 105-418; 2pcs stud, threaded rod 105-422; 1pc air filter 33-AFLRC018; 4pcs spacer 33-ASPC1023; 1pc bracket 33-B6557; 2pcs hhcs 1/2 - 13 x 1 34-724; 4pcs nut, heavy hex 53-48; 4pcs nut, heavy hex 53-49; 2pcs nut, hex 53-58

4310-01-521-0489

01-521-0489

Intake Air Cleane Filter Element

Used on filter assembly. filter element filter element recommended onboard spare

4310-01-521-0538

01-521-0538

Rotary Compressor

Used on mrap - unique nsn - mrap no permanent wsdc identified. end item 4210-01-486-1035

4310-01-521-0643

01-521-0643

Exhaust-intake Pneumatic Muffler

6.250" overall length 3.312" overall width 3.5oz resivoir cap; npt 0.75"