01-548-0871
Oil Sorbent
Poly socks 3" by 10 feet. 100% polypropylene material, consisting of 2 layers, one of loose particulate in side a stronger polyester sleeve. high strength
01-550-0900
Hazardous Spill Containment Kit
Used on 2330-01-537-8217;semi-trailer,refueler. kit, repair, deluxe for spill containment system 8oz. can, hh-66 vinyl cement with brush-in-can. waterproof, flexible bond. 10 square feet of xr-5 8130 repair material. heat gun with slotted heat spreader. 2 single-arm silicon seam roller. 8 1/2 stainless steel scissors. 6 industrial quality utility knife (3) sheets 80d sandpaper. 16 heavy duty tool
01-550-3802
Hazardous Spill Containment Unit
Used on 2330-01-537-8217. 14 ft x 54 ft x 12 inch material of construction seaman. xr-5 30 mil, 30 oz extruded black vinyl one piece construction with no assembly or compressed air required. inside support with reinforced via double ribbed aluminum members. inside supports are on a of 2 foot centers
01-552-2635
Oil Sorbent
1 ply heavyweight pad, 100 per bale; lgth 19 in; width 16 in; used on oil/petroleum based fluid spills
01-552-2636
Oil Sorbent
Lint free non gap boom; used w/oil
01-552-2639
Oil Sorbent
1 ply medium weight white roll, lgth 150 ft; width 30 in; absorbs 44 gallons
01-552-2640
Oil Sorbent
For high volume petroleum spills between train track rails; absorbs 39 gallons; supplied in roll; lgth 80 ft; width 58 in
01-552-2641
Oil Sorbent
Mro 100 pads w/dispense n disposesystem; 150 per box; absorbs 39 gallons; lgth 19 in; width 15 in
01-552-5045
Spill Containment Hazardous Sock
Absorbs 28 gallons; 30 per case
01-554-4160
Hazardous Spill Containment Unit
01-555-6885
Hazardous Spill Containment Unit
01-557-9702
Hazardous Spill Containment Unit
Snap-up design; compact storage
01-559-3306
Hazardous Spill Containment Kit
Used on 2generation vortac (2gvortac). spill kit for KXT660 battery set at 36 volt configuration for all vortacs; fits the 7 foot battery rack for 18 cells
01-560-6129
Hazardous Spill Containment Unit
Snap up design, easily assembled; wt 170 lbs; 3231 gal sump capacity
01-562-3899
Hazardous Spill Containment Unit
Used on 4930-01-533-9826,tank and pump unit medium. containment berm 6 ft x 6ft x 8 inch material of 18 oz extruded tan vinyl one piece construction with no assembly or compressed air required. inside support with reinforced via double ribbed aluminum members. inside supports are on a of 2 foot centers
01-562-4420
Spill Control Drum Patch
Used on 4930-01-533-9826,tank and pump unit medium. nitrile liner patch
01-562-4425
Spill Control Drum Patch
Used on 4930-01-533-9826,tank and pump unit medium. nitrile liner patch
01-562-6025
Hazardous Spill Containment Unit
Used on 4930-01-533-9830,tank and pump unit-small. containment berm berm design specifications: 4 ft x 6 ft x 8 inch spill containment berm manufactured with 18.5oz pvc one piece construction with no assembly or compressed air required inside support with reinforced via double ribbed aluminum members inside supports are on a of 2 foot centers
01-563-1593
Oil Sorbent
Two cubic ft loose filled bag; absorbs from 12 to 17 gallons; 16 cases/48 bags per pallet
01-563-1594
Oil Sorbent
Two cubic ft loose dbl compressedbag (4 cu ft of product) absorbs from 26 to 34 gallons; 50 bags per pallet
01-564-3751
Oil Sorbent
Oil absorbent 50 x 40 cm; 400g/cubic meter
01-564-3752
Oil Sorbent
Oil absorbent 50 x 40 cm; 200g/cubic meter
01-564-3761
Oil Sorbent
Oil absorbent 50 x 40 cm; 400g/cubic meter
01-564-3763
Oil Sorbent
Oil absorbent 08 x 1200 cm
01-564-8084
Hazardous Spill Containment Unit
Aire-stinger berm foam sidewall system, fed spec ppp-c-1752d, ty 1, CL1, gra encased in a fuel/chemical resistanc membrane cover; foam logs in entry/exit to permit a tanker to be driven in or out
01-565-5176
Hazardous Material Sorbent
Material is hydrated alumino-silicates; able to absorb a wide variety of hydrocarbons; acts as a molecular sieve
01-569-8792
Hazardous Spill Containment Unit
Used on 4930-01-094-0026 and 4930-01-113-9173. sentry quickberm spill containment berm 10'X30'X1 ridig-lock-safe quickberm rectangular spill berm mfg'd with 8130 XR5 or equal.one piece, no assembly req'd.to set up, simply unfold from the compact, stowed position andlift wall until the stainless steel brace engages the detent at the 90 degree upright position.braces shall be able to rest in a folded position
01-569-8818
Hazardous Spill Containment Unit
Used on 4930-01-094-0026 and 4930-01-113-9173. sentry quickberm spill containment berm 12'X26'X1' rigid-lock fail-safe quickberm rectangular spill berm mfg'd with 8130 XR5 or equal. one piece, no assembly req'd to set up, simply unfold from the compact, stowed position
01-569-8833
Hazardous Spill Containment Unit
Used on 4930-01-094-0026 and 4930-01-113-9173. sentry quickberm spill containment berm 12"X36"X1' rigid-lock fail-safe quickberm rectangular spill berm mfg'd with 8130 XR5 or equal. one piece, no assembly req'd. to set-up, simply unforld from the compact, stowed position
01-569-8848
Hazardous Spill Containment Unit
Used on 4930-01-094-0026 and 4930-01-113-9173. spill containment berm 14'X56'X1 rigid lock lail-safe quick bermi rectangular spill berm mfg'd with 8130XR5 or equal. one piece no assembly required to set-up. simply unfold from the compact stowed position
01-572-3891
Hazardous Mat Spill Clean-up Kit
Small spill kit 16"X17"X4" tan canvas zippered bag with loops for carrying or hanging on wall. (1) plastic 8" counter still bristle brush, (1) plastic 12" dust pan, (2) .34 mil disposal bags, (1) 4 lb pouch natures's broom absorbent tat will encapsulate over 1 gallon
01-572-3892
Hazardous Material Sorbent
Absorbent item comes in a 22 in x 16 in x 4 in poly bag; absorbs a wide range of oils, fuels, anti-freeze, etc. contains micro-organisms that bioremediate hydrocarbons into carbon dioxide
01-572-3902
Hazardous Material Sorbent
Absorbent sweeping compound bio based - usda biopreferred 97%; comes in a 13 in x 7.5 in x 5 in poly pouch; absorbs wide range of oils, fuels, anti-freeze, etc; micro-organisms bioremediate hydrocarbons into carbon dioxide
01-572-3908
Hazardous Material Sorbent
Absorbent sweeping compound bio-based usda biopreferred 97%; comes in a 22 in x 16 in x 4 in poly bag; sweeping compound is a non-grit product that can be used on most floor surfaces. sweeping compound uses no dyes that reduce ability to gather dust
01-572-3929
Absorbent Hazardous Mater Pillow
Absorbent sock 100 percent bio based nature's broom absorbent sock 3"X40" with bio-based skin. absorbs 1/2 gallon of oil per sock. absorbs fuels, anti-freeze
01-572-3933
Absorbent Hazardous Mater Pillow
Natures's broom bio based absorbent pillow 100 percent bio based nature's broom absorbent pillow 15"X15" with bio based skin. absorbs over 1 gallon per pillow. absorbs oil, fuel, anti-freeze
01-572-3936
Hazardous Mat Spill Clean-up Kit
Spill station spill station includes; one 8in by 12in metal wall mount; one ducksorb resealable bad with 4 lb of tackl concentrate oil absorbent; one plastic counter stiff bristle bruch; one plastic dust pan; one 4lb bag will encapsulate over; two gallons of used motor oil; one gallon of anti-freeze or one gallon of diesel fuel; this usda 98per cent bio-based absorbent will bio-remediate hydrocarbons into carbon dioxide
01-572-6333
Absorbent Hazardous Material Pad
4 in 1 mat-universal 100pct polypropylene; 41cm x 46meter unrolled; grey color; 1 roll per box; 66.0 liter absorbent; 5.89kg weight; perforated every 25.5cm
01-572-7177
Hazardous Material Sorbent
Accubond ii silica solid phase cartridge; used on chromatography equipt; 100 mg; 10 per pkg
01-575-3409
Hazardous Mat Spill Clean-up Kit
Spill kit lever locked 55 gallon drum. for medium spill response. contents: 50 - 15"X19" pads; 4 - 3"X12' socs; 8 - 17"X19" pillows; 1 pair goggles; 1 - pair gloves; 5 - disposal bags; emergency response handbook
01-575-6976
Hazardous Spill Containment Unit
01-577-1857
Spill Control Drum Patch
Used on palletized loading system (pls), m1074, m1075, m1076, m1077. 3 inch ftss repair patch
01-577-1940
Sand Bag Filling Machine
Used on sand bag filling machine. bucket bagger; sand bagging skid steer, attachment 2 person operation; mount: skid steer universal quick tach; bucket size: 11 cu. feet; heaping bucket : 13 cu. feet; bucket weight: 600 pounds; 11 cu feet sand: 1, 430 pounds; 13 cu. feet sand: 1, 690 pounds; hydraulic flow: 10.6 gpm; hydraulic mas pressure: 3, 000 psi
01-577-5761
Absorbent Hazardous Material Pad
Used on sorbent boom. pad
01-577-6229
Oil Sorbent
Oil plus heavy pad dispense this class of pads is for oil only; size of pad is 19.000" (nom) by 15.000" (nom) ; shipping weight is 30 pounds; item is 3-ply
01-578-4278
Oil Sorbent
Oil only class; absorbency is 6 gallons per bale; 25 covers per case; size (diameter) is 22.000" (nom) ; pre-cut to fit 55 gallon drums with one
01-578-8978
Hazardous Spill Containment Unit
Used on mast facilities misc parts. lagoon assembly, retention, collapsible rectangular spill berm mfg'd with 8130 XR5 or equal. one piece, no assembly req'd. to set-up, simply unfold from the compact, stowed position
01-578-9958
Hazardous Spill Containment Kit
Installs the empac imbiber bead; 5 in. od; 16.5 in. long
01-579-4724
Hazardous Spill Containment Kit
Used on 9515-01-563-0360.
01-582-7903
Hazardous Mat Spill Clean-up Kit
Used on modular fuel system (mfs) tank rack module (trm). economy spill kit 4 each economy spill kits, 3 each 3.000 inch x 48.000 inch pig oil - only socks, 12 each 15.000 inch x 20.000 inch stat-mat pads, 8 each 30.000 inch long x 18.000 inch wide disposal bags
