Serving our customers with quality and safety first.
diesel engine
rnitrogen servicing cart; gaseous nitro generating capacity of 15 stand cub ft per minute at 4000 psi; air transportable for C130, C141, C5, C17, KC135 and KC10; certified for trans with 1/2 to 3/4 tank of fuel; has HEAVY-Duty reinforced forklift tine guides; must have a min gaseous nitrogen purity level of 97 pct; no solid particles with max dimen greater than 25 microns; not more than 26.3 ppm water vapor by vol of gas at dewpoint of -65 deg f; will provide nitro pressures up to 4000psi; low press in range of 0-600Psi; high press sys rec storage cap must provide min 574.5 stand cub ft of gas nitro storage; low press storage at least 500 cu in; continuous oper at rated capacity of 15 cfm at press up to 4000psi; JP-8 primary fuel
A mobile unit designed to produce a continuous supply of nitrogen and/or oxygen, and charge it into container(s). Excludes generating and charging plant, oxygen-nitrogen, semitrailer mounted.
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Warner-robins air logistics center 455 byron st robins afb, ga 31098-1860
Ground support equipment
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.