01-295-7920
Arbor Press Fixture
01-296-4657
Hold-down Fixture
01-296-4658
Hold-down Fixture
01-299-8805
Hold-down Fixture
01-301-3201
Arbor Press Fixture
C/o a pressing plate 10 in. lg by 6 in. wd by 1 in. tkns, a shaft support 1.88 in. ht by 1.7495 in. dia, and a drive sleeve 3.75 in. lg by 1.38 in. dia; plate 18.05 lbs, support 1.4 lbs, sleeve 0.88 lb; black oxide fibish; f-15e
01-301-3202
Arbor Press Fixture
C/o sleeve driver 1.5 in. ht by 1.75 in. dia, and adapter 1.0 in. lg by 0.699 in. dia; driver 1 lb, adapter 0.5 lb, black oxide finish; f-15e acft
01-304-3065
Arbor Press Fixture
01-304-3066
Arbor Press Fixture
2.500" overall length
01-306-9174
T-slot Sliding Block
01-307-0447
Hold-down Fixture
Used on hellfire ts-100 assembly.
01-308-8927
Drill Jig Bushing
4.000" overall length
01-308-9399
Drill Jig Bushing
1.250" overall length
01-310-8876
Drill Jig Bushing
0.500" overall length
01-311-8247
Drill Jig Bushing
01-312-5544
Drill Jig Bushing
01-312-5545
Drill Jig Bushing
01-312-5546
Drill Jig Bushing
01-312-5547
Drill Jig Bushing
1.000" overall length
01-312-5548
Drill Jig Bushing
1.000" overall length
01-313-2221
Drill Jig Bushing
0.500" overall length
01-313-3147
Drill Jig Bushing
0.250" overall length
01-313-3149
Drill Jig Bushing
1.000" overall length
01-313-3152
Drill Jig Bushing
0.500" overall length
01-313-8896
Hold-down Fixture
01-315-9183
Hold-down Fixture
Used on turret lathe.
01-317-1038
Drill Jig Bushing
0.375" overall length
01-318-7638
T-slot Sliding Block
01-319-2690
Drill Jig Bushing
0.250" overall length
01-320-1894
Hold-down Fixture
01-320-1895
Hold-down Fixture
01-320-2666
Drill Jig Bushing
1.750" overall length
01-322-5483
Drill Jig Bushing
01-322-5484
Drill Jig Bushing
01-322-6342
Arbor Press Fixture
3.5 in. by 7.2 in. by 8.7 in.; wt 15 lbs; tool c/o e-shaped body; pusher rod mounts at top flznge of e-frame against tension spring; plunger of arbor press applied to knob of pusher rod; pusher attached to female threads in pusher rod; pusher used for removal of bushings from three lugs of compression link bracket, also for installation of bushings of the bracket when used with pusher plate; used during overhaul of exhaust nozzle compression link bracket to replace worn out bushings; F101-ge-102/F110-ge-100 engine end item; used with arbor press, min throat 10.0 in.
01-322-7445
Hold-down Fixture
01-322-7446
Hold-down Fixture
01-324-2498
Hold-down Fixture
Utilized on generator set 5kw, trailer mtd, e/i NSN6115013031484
01-324-6339
Hold-down Fixture
Used on f100 pw-229 engine age.. c/o base plate, dowel pins, and swing clamps
01-324-6461
Arbor Press Fixture
C/o 3 upper staking tools, 3 pilots, 1 lower staking tool; staking dia rqmts 1.278 for MS27646-39, 1.860 for MS27646-42, 2.110 for MS27646-43
01-324-6476
Drill Jig Bushing
0.750" overall length fixture aircraft, fscm 07482
01-324-6478
Drill Jig Bushing
0.750" overall length fixture aircraft, fscm 07482
01-326-0429
Drill Jig Bushing
0.750" overall length
01-326-4184
T-slot Sliding Block
Used on command and control section.
01-327-9844
Ri Drilling And Locating Fixture
Purchase description identification:98524-CW414-250
01-329-4752
Drill Jig Bushing
Used on aircraft model f15,fscm 76301. 0.500" overall length
01-330-6008
Hold-down Fixture
Used on mk-2289/usm-602 trident.
01-332-2814
Drill Jig Bushing
0.234" overall length used on aircraft, hornet, f/a-18
01-332-4741
Drill Jig Bushing
0.250" overall length
01-332-4742
Drill Jig Bushing
0.250" overall length
01-332-4743
Drill Jig Bushing
0.250" overall length
