01-191-0355
Bearing Unit Housing
01-191-0356
Bearing Unit Housing
01-191-0357
Bearing Unit Housing
01-191-0626
Plain Bearing Unit
Used on kc135-r acft. 0.9379" bore diameter 1.000" housing length pillow block, solid
01-191-3053
Pillow Block Cap
01-191-3054
Pillow Block Cap
01-191-3055
Pillow Block Cap
01-191-3056
Pillow Block Cap
01-191-3058
Pillow Block Cap
01-191-3065
Bearing Unit Housing
01-191-6214
Pillow Block Cap
01-191-6215
Pillow Block Cap
01-191-6216
Pillow Block Cap
01-191-7363
Pillow Block Cap
01-191-7364
Pillow Block Cap
01-191-7365
Pillow Block Cap
01-191-7376
Bearing Unit Housing
01-191-7580
Bearing Unit Housing
01-191-7581
Bearing Unit Housing
01-192-1379
Pillow Block Cap
Used on 5120-01-210-4096,puller,mechanical.
01-192-2172
Pillow Block Cap
01-192-2304
Plain Bearing Unit
Used on kc135-r acft. housing has an outside diameter of 0.940 in. nom, bore w/o bearing is 0.640 in. nom, width is 1.055 in. nom; there are two flanges; one is 1.490 in. nom o/a wide, flatted at the top to 0.920 in. nom
01-192-2305
Plain Bearing Unit
Used on kc-135r acft. housing has an od of 0.940 in. nom, width is 1.280 in. nom, bore w/o bearing is 0.640 in.; there are two flanges one is 0.760 in. wide at top tapered to 1.120 in. wide at base w/radius at base of 0.470 in for welding to housing, length is 2.420, there are two weld spots 0.800 in. apart w/first located 0.420 in. from top; second flange is 2.500 in. long w/rounded end, 0.750 in. wide, radius 0.470 where welded to housing, 0.280 in. from center line at top 0.370 in. from center line at bottom; there are three spot welds 0.750 in apart with first 0.980 in. from center line; center to center of two flanges is 46.5 deg min 47.5 deg max; bushing BACBX9N125 is press fit into housing
01-192-4517
Bearing Unit Housing
01-192-5875
Bearing Unit Housing
01-192-5943
Bearing Unit Housing
01-192-7368
Bearing Unit Housing
01-192-8975
Bearing Unit Housing
01-192-8976
Bearing Unit Housing
01-192-9410
Pillow Block Cap
01-192-9411
Pillow Block Cap
01-192-9414
Pillow Block Cap
Used on flo-tork rotary actuator,model 13a.
01-192-9415
Pillow Block Cap
Used on flo-tork,rotary actuator,models 250d and 250e.
01-193-1320
Bearing Unit Housing
01-193-2344
Bearing Unit Housing
01-193-3926
Bearing Unit Housing
01-193-6786
Ball Bearing Unit
01-194-0547
Pillow Block Cap
01-194-0548
Pillow Block Cap
01-194-0559
Bearing Unit Housing
01-194-0565
Bearing Housing Liner
01-194-0566
Bearing Housing Liner
01-194-0787
Ball Bearing Unit
01-194-0859
Pillow Block Cap
01-194-0860
Pillow Block Cap
01-194-0861
Pillow Block Cap
Used on flo tork,rotary actuator model c-895.
01-194-3089
Plain Bearing Unit
01-194-4901
Pillow Block Cap
01-194-4902
Pillow Block Cap
01-194-4903
Pillow Block Cap
