00-151-5129
Sleeve Bushing
2.1300" overall length anodize surface treated 18c solid, external flanges both ends
00-151-5130
Sleeve Bushing
3.2260" overall length cadmium surface treated 22c solid, external flange one end
00-151-5131
Sleeve Bearing
1.2450" overall length 22c solid, external flange one end
00-151-5136
Sleeve Bushing
0.3650" overall length cadmium surface treated 17c solid, plain, no outside flanges
00-151-5145
Sleeve Bushing
00-151-5146
Sleeve Bushing
0.2620" overall length cadmium surface treated 22c solid, external flange one end
00-151-5148
Sleeve Bushing
0.3050" overall length cadmium surface treated 17c solid, plain, no outside flanges
00-151-5157
Plain Rod End Bearing
3a thread class right-hand 2.3460" overall length 0.2495" bore diameter 24 thread quantity per inch chromium inner member surface treated ball type unf thread series
00-151-5160
Washer Thrust Bearing
5.2260" outside diameter round
00-151-5162
Sleeve Bushing
0.8300" overall length 18b segmented, external flanges both ends
00-151-5169
Sleeve Bushing
1.6670" overall length cadmium surface treated 22c solid, external flange one end
00-151-5171
Sleeve Bearing
0.6775" overall length 17c solid, plain, no outside flanges
00-151-5178
Sleeve Bushing
0.0960" first hole diameter 0.5720" overall length passivate surface treated 22c solid, external flange one end
00-151-5179
Sleeve Bushing
1.3150" overall length 17c solid, plain, no outside flanges
00-151-5182
Sleeve Bushing
0.4850" overall length flat ground on od 0.2900 in. from c/l one side 21c solid, external flange
00-151-5189
Sleeve Bearing
0.3287" overall length plastic /tetrafluoroethylene/liner bonded to left flange face 22c solid, external flange one end
00-151-5194
Sleeve Bearing
0.5650" overall length six <6> slots in left end surfaceof body 22c solid, external flange one end
00-151-7132
Plain Self-aligning Bearing
0.7495" bore diameter lock ring required when outer race member has double fracture without insert or liner
00-151-7593
Sleeve Bushing
00-151-7835
Sleeve Bearing
0.0920" overall length 22c solid, external flange one end
00-151-7836
Sleeve Bushing
0.8160" overall length 17c solid, plain, no outside flanges
00-151-7837
Sleeve Bushing
0.8160" overall length 17c solid, plain, no outside flanges
00-151-7841
Sleeve Bushing
0.3600" overall length 22c solid, external flange one end
00-151-7842
Sleeve Bearing
0.3438" first hole diameter 2.0000" overall length 17c solid, plain, no outside flanges
00-151-9298
Sleeve Bushing
0.1860" overall length 22c solid, external flange one end
00-151-9763
Sleeve Bushing
0.2150" overall length left end surface of flange id counterbored 0.2480 in. min 0.2530 in. max dia 0.0312 in. deep passivate surface treated 22c solid, external flange one end
00-152-0719
Washer Thrust Bearing
3.9370" outside diameter washer cut into two halves, cut is 42.5 degrees from center ofsurface hole round
00-152-0749
Plain Rod End Bearing
3a thread class right-hand 4.7330" overall length 1.4364" bore diameter 18 thread quantity per inch ball type unf thread series
00-152-3766
Sleeve Bushing
Paint surface treated
00-152-3811
Sleeve Bushing
0.2450" overall length inside right corner 0.0100 in. radius, 0.4400 in. dia, 0.0400 in. lg 22c solid, external flange one end
00-152-4791
Sleeve Bushing
0.3800" overall length 22c solid, external flange one end
00-152-4903
Sleeve Bushing
0.6528" overall length passivate surface treated 17c solid, plain, no outside flanges
00-152-5243
Sleeve Bearing
2.8650" overall length
00-152-5251
Linear-rotary Motion Roller
00-152-5289
Sleeve Bushing
2.6210" overall length 22c solid, external flange one end
00-152-5297
Sleeve Bearing
0.2640" overall length id threaded, 0.375-24, unf 3b cadmium surface treated 17c-1 solid, plain, no outside flanges, internal flange one end
00-152-5305
Sleeve Bushing
0.2500" overall length 17c solid, plain, no outside flanges
00-152-5308
Sleeve Bushing
00-152-5323
Sleeve Bushing
00-152-5423
Sleeve Bearing
1.4950" overall length 17c solid, plain, no outside flanges
00-152-5554
Sleeve Bushing
0.8800" overall length cadmium surface treated 17c solid, plain, no outside flanges
00-152-5612
Sleeve Bearing
0.9375" overall length 22c solid, external flange one end
00-152-5613
Sleeve Bushing
1.7850" overall length cadmium surface treated 17c solid, plain, no outside flanges
00-152-6279
Sleeve Bushing
1.1410" overall length cadmium surface treated 17c solid, plain, no outside flanges
00-152-6452
Sleeve Bushing
00-152-7330
Sleeve Bearing
0.3740" overall length 17c solid, plain, no outside flanges
00-152-7332
Sleeve Bushing
0.8220" overall length left end id of bore counterbored to 1.000 in. dia. by 0.400 in. dp 22c solid, external flange one end
00-152-7334
Washer Thrust Bearing
2.4210" outside diameter round
00-152-7349
Sleeve Bearing
0.6700" overall length 22c solid, external flange one end
00-152-7350
Sleeve Bearing
