01-193-2311
Sleeve Bushing
01-193-2312
Sleeve Bushing
01-193-2314
Washer Thrust Bearing
01-193-2482
Sleeve Bearing
0.8400" overall length id is special configuration cadmium left end surface of body surface treated
01-193-2483
Sleeve Bearing
01-193-2484
Sleeve Bushing
0.3910" overall length cadmium surface treated 22c solid, external flange one end
01-193-2485
Sleeve Bushing
0.0810" first hole diameter 2.4700" overall length cadmium surface treated 17c solid, plain, no outside flanges
01-193-3314
Sleeve Bushing
01-193-3378
Sleeve Bushing
Used on nimitz class cvn.
01-193-4097
Sleeve Bearing
3.5370" overall length 22c solid, external flange one end
01-193-4099
Plain Rod End Bearing
3a thread class right-hand 14.4000" overall length 1.8700" bore diameter 12 thread quantity per inch one slot 0.096 in. d, 0.125 in. w, length of thsds on shank; four holes thru clevis type extensions in line with slot distances are from center of brng, plain sherical to hole center, 1st 6.587 0.375 dia thru, 2nd 5.087 0.25-28unjf-3b, 3d 4.0 0.4062 dia thru, 4th 2.875 0.25-28unjf-3b ball type unj thread series
01-193-4409
Plain Self-aligning Bearing
01-193-4444
Sleeve Bearing
01-193-4445
Sleeve Bearing
01-193-4446
Sleeve Bushing
01-193-4447
Sleeve Bushing
01-193-4449
Sleeve Bushing
01-193-4561
Sleeve Bearing
17c solid, plain, no outside flanges
01-193-4562
Sleeve Bushing
0.8467" overall length cadmium surface treated 21c solid, external flange
01-193-4563
Sleeve Bushing
1.7520" overall length 17c solid, plain, no outside flanges
01-193-4602
Sleeve Bushing
01-193-6967
Sleeve Bearing
0.1880" overall length passivate inside diameter surface of body surface treated 22c solid, external flange one end
01-193-6968
Sleeve Bearing
0.7450" overall length 17c solid, plain, no outside flanges
01-193-6969
Sleeve Bushing
0.5000" overall length rectangular flange 0.6100 in. l, 0.5000 in. w passivate surface treated
01-193-6971
Sleeve Bushing
21c solid, external flange
01-193-6973
Sleeve Bushing
1.1250" overall length 10-24 2a threaded hole through bushing wall 7/16 in. from end 17c solid, plain, no outside flanges
01-193-6974
Sleeve Bushing
0.1810" overall length optional groove left flange body corner 0.0620 in. max width, 0.005 in. max deep passivate surface treated 22c solid, external flange one end
01-193-6976
Sleeve Bushing
01-193-6977
Sleeve Bushing
01-193-6978
Sleeve Bushing
0.0650" overall length passivate surface treated 22c solid, external flange one end
01-193-6979
Sleeve Bushing
0.2950" overall length cadmium surface treated 22c solid, external flange one end
01-193-6980
Sleeve Bushing
1.1640" overall length cadmium surface treated 22c solid, external flange one end
01-193-6981
Sleeve Bushing
0.2500" overall length chromium outside diameter surface of body surface treated 17c solid, plain, no outside flanges
01-193-6982
Sleeve Bushing
0.2520" overall length optional inner layer material-karon, fscm 50632 or fibriloid, fscm 09455 passivate outer layer surface treated 22c solid, external flange one end
01-193-6983
Sleeve Bushing
0.3420" overall length optional inner layer material-karon, fscm 50632 or fibriloid, fscm 09455 passivate outer layer surface treated 22c solid, external flange one end
01-193-6985
Sleeve Bushing
5.0950" overall length 17c solid, plain, no outside flanges
01-193-6987
Sleeve Bushing
0.1810" overall length groove optional 22c solid, external flange one end
01-193-6988
Sleeve Bushing
0.2122" overall length groove optional passivate surface treated 22c solid, external flange one end
01-193-6989
Sleeve Bushing
0.7450" overall length 17c solid, plain, no outside flanges
01-193-6995
Plain Rod End Bearing
3a thread class right-hand 2.9185" overall length 0.4995" bore diameter 20 thread quantity per inch furnished w/ 2 seals composed of stainless steel passivate inner member surface treated ball type unf thread series
01-193-7083
Sleeve Bearing Set
01-193-7275
Sleeve Bushing
4.5800" overall length left end truncated with locking tab 17deg, 50min wide from center left on short end of angle on right end; opposite of L1100043-005 21c solid, external flange
01-193-7550
Sleeve Bushing
01-193-7663
Sleeve Bearing
0.3745" overall length passivate surface treated 22c solid, external flange one end
01-193-7665
Sleeve Bearing
0.3075" overall length 22c solid, external flange one end
01-193-7667
Sleeve Bushing
0.6600" overall length 22c solid, external flange one end
01-193-9271
Sleeve Bushing
01-193-9475
Sleeve Bearing
Used on 2420-66-148-7692, hmee (high mobility engineer excavator).
01-193-9476
Sleeve Bearing
01-193-9478
Sleeve Bushing
0.1650" overall length cadmium surface treated 22c solid, external flange one end
