00-082-1636
Sleeve Bearing
0.7500" overall length oxide surface treated 17c solid, plain, no outside flanges
00-082-3382
Washer Thrust Bearing
1.5615" outside diameter left end surface of flange counterbore 1.4680 in. min, 1.4690 in. max dia, inside dia of bore counter snk 0.8700 in. min, 0.8900 in. max dia, by 118 min, 122 max degrees cadmium surface treated round
00-082-3393
Plain Rod End Bearing
3a thread class right-hand 0.2490" bore diameter 40 thread quantity per inch cadmium surface treated unc thread series
00-082-5968
Sleeve Bushing
1.1870" overall length 22c solid, external flange one end
00-082-7948
Sleeve Bushing
0.0400" first hole diameter 0.9050" overall length cadmium surface treated 22c solid, external flange one end
00-082-8208
Sleeve Bushing
Used on B-111A. cadmium surface treated
00-082-8995
Sleeve Bushing
0.1630" overall length 17c solid, plain, no outside flanges
00-082-9911
Sleeve Bushing
0.4687" overall length 17a split, plain, no outside flanges
00-082-9912
Sleeve Bushing
1.1562" overall length two 45 deg angles on left side of flange outside to center 22c solid, external flange one end
00-083-0213
Plain Self-aligning Bearing
0.9995" bore diameter oil hole in outer race member chromium inner member surface treated without insert or liner
00-083-1420
Linear-rotary Motion Roller
0.400" outside diameter plain
00-083-1427
Sleeve Bushing
0.6400" overall length 22c solid, external flange one end
00-083-2850
Sleeve Bushing
00-083-2861
Sleeve Bushing
00-083-3905
Sleeve Bushing
0.0600" first hole diameter 1.6250" overall length 17c solid, plain, no outside flanges
00-083-4345
Sleeve Bushing
0.9990" overall length 17c solid, plain, no outside flanges
00-083-4768
Plain Rod End Bearing
3a thread class 20 thread quantity per inch ball type unf thread series
00-083-4890
Sleeve Bushing
1.5730" overall length 22c solid, external flange one end
00-083-5740
Sleeve Bearing Set
00-083-6002
Linear-rotary Motion Roller
0.755" outside diameter
00-083-6033
Sleeve Bearing
00-083-6629
Sleeve Bearing
1.0050" overall length chromium surface treated
00-083-8366
Sleeve Bushing
00-083-8367
Sleeve Bushing
0.9700" overall length outside dia of shank flatten to 0.427 in. min, 0.437 in. max width cadmium surface treated 22c solid, external flange one end
00-083-8405
Washer Thrust Bearing
00-083-8449
Sleeve Bearing
0.3750" overall length 17c solid, plain, no outside flanges
00-083-8456
Sleeve Bushing
17c solid, plain, no outside flanges
00-083-8917
Plain Rod End Bearing
3a thread class right-hand 6.2800" overall length 0.9995" bore diameter 18 thread quantity per inch cadmium rod end body surface treated ball type unef thread series
00-083-8918
Plain Rod End Bearing
00-083-8926
Plain Rod End Bearing
3b thread class right-hand 5.0300" overall length 0.9995" bore diameter 12 thread quantity per inch passivate rod end body surface treated ball type un thread series
00-083-9485
Sleeve Bearing
1.8750" overall length 17c solid, plain, no outside flanges
00-084-0617
Sleeve Bearing
0.1770" overall length plastic polytetrafluoroethylene/ liner bonded to left end surface of body anodize outside diameter surface of body surface treated 22c solid, external flange one end
00-084-1291
Sleeve Bushing
00-084-3259
Sleeve Bushing
2.3100" overall length 17c solid, plain, no outside flanges
00-084-3422
Sleeve Bearing
0.1250" overall length 22c solid, external flange one end
00-084-3423
Sleeve Bearing
0.4290" overall length 21c solid, external flange
00-084-4250
Sleeve Bushing
0.3750" first hole diameter 4.2500" overall length 22c solid, external flange one end
00-084-6802
Sleeve Bushing
00-084-6883
Sleeve Bushing
00-084-6884
Sleeve Bushing
00-084-7071
Plain Self-aligning Bearing
1.6250" bore diameter chromium inner member surface treated without insert or liner with staking groove
00-084-8479
Sleeve Bushing
0.7480" overall length 22c solid, external flange one end
00-084-8935
Sleeve Bushing
0.4700" overall length 17c solid, plain, no outside flanges
00-085-0884
Sleeve Bushing
0.2500" overall length 17c solid, plain, no outside flanges
00-085-1905
Sleeve Bearing
0.7500" overall length zinc surface treated 17b segmented, plain, no outside flanges
00-085-2016
Sleeve Bearing
00-085-2341
Plain Rod End Bearing
3a thread class right-hand ball type
00-085-2342
Plain Rod End Bearing
3a thread class right-hand 3.1900" overall length 0.2500" bore diameter 18 thread quantity per inch anodize rod end body surface treated flange type unf thread series
00-085-3036
Washer Thrust Bearing
2.1250" outside diameter round
00-085-3153
Sleeve Bearing
0.6250" overall length 17c solid, plain, no outside flanges
