00-522-2461
Linear-rotary Motion Roller
0.780" outside diameter 63 microinches rms finish on all surfaces plain, one protruding hub
00-522-2538
Sleeve Bushing
1.1094" overall length 22c solid, external flange one end
00-522-2539
Sleeve Bushing
0.9843" overall length 22c solid, external flange one end
00-522-2540
Sleeve Bushing
0.9531" overall length 22c solid, external flange one end
00-522-2541
Sleeve Bushing
0.9843" overall length 22c solid, external flange one end
00-522-2542
Sleeve Bushing
0.9375" overall length 22c solid, external flange one end
00-522-3833
Sleeve Bushing
0.5920" first hole diameter 2.1700" overall length 17c solid, plain, no outside flanges
00-522-4052
Sleeve Bearing
1.1875" overall length 60, 000 psi min yield strength, 110, 000 psi min tensile strength 22c solid, external flange one end
00-522-4078
Sleeve Bearing
0.1875" first hole diameter 1.2080" overall length 1 antirotation hole in flange 0.1570 in. dia 22c solid, external flange one end
00-522-4094
Sleeve Bushing
0.8750" overall length phosphate surface treated 22c solid, external flange one end
00-522-4121
Sleeve Bushing
1.6900" overall length phosphate surface treated 22c solid, external flange one end
00-522-4285
Sleeve Bearing Half
00-522-5013
Sleeve Bushing
1.5800" overall length 17c solid, plain, no outside flanges
00-522-5180
Sleeve Bushing
0.8530" overall length 22c solid, external flange one end
00-522-5586
Sleeve Bearing
0.1890" first hole diameter 1.2300" overall length hole must be drilled straight thru both sides for installation of roll pin anodize surface treated 17c solid, plain, no outside flanges
00-522-5943
Washer Thrust Bearing
0.8550" outside diameter round
00-522-6150
Sleeve Bearing
2.0000" overall length 17c solid, plain, no outside flanges
00-522-6212
Bearing Replacement Me Parts Kit
Bearings are 0.0200 in. undersized
00-522-6513
Sleeve Bearing
0.9840" overall length 17c solid, plain, no outside flanges
00-522-7105
Plain Self-aligning Bearing
0.9995" bore diameter cadmium outer race member surface treated without insert or liner with staking groove
00-522-7157
Washer Thrust Bearing
0.5000" outside diameter passivate outer layer surface treated round
00-522-7872
Sleeve Bearing
0.2656" first hole diameter 2.1875" overall length 17c solid, plain, no outside flanges
00-522-8639
Sleeve Bushing
0.2750" overall length cadmium surface treated 17c solid, plain, no outside flanges
00-522-8665
Sleeve Bearing
3.3750" overall length phosphate surface treated 22c solid, external flange one end
00-522-8744
Sleeve Bushing
0.1450" overall length cadmium surface treated 17c solid, plain, no outside flanges
00-522-8937
Plain Rod End Bearing
3b thread class right-hand 1.8605" overall length 0.2500" bore diameter 24 thread quantity per inch ball type unf thread series
00-522-9043
Sleeve Bushing
0.9950" overall length cadmium surface treated 22c solid, external flange one end
00-522-9186
Sleeve Bearing
00-522-9216
Sleeve Bearing
00-522-9890
Plain Self-aligning Bearing
00-522-9990
Sleeve Bearing
0.4169" overall length 17c solid, plain, no outside flanges
00-523-0279
Sleeve Bearing
0.2500" first hole diameter 1.3600" overall length 22c solid, external flange one end
00-523-0353
Sleeve Bearing
0.7812" overall length
00-523-1667
Sleeve Bearing
1.0000" overall length 17c solid, plain, no outside flanges
00-523-1959
Sleeve Bearing
00-523-2236
Washer Thrust Bearing
0.7500" outside diameter round
00-523-3058
Washer Thrust Bearing
Used on motor dc 500v.
00-523-4231
Plain Rod End Bearing
3a thread class right-hand 2.4230" overall length 0.3750" bore diameter 24 thread quantity per inch cadmium rod end body surface treated ball type unf thread series
00-523-4246
Sleeve Bearing
00-523-4278
Sleeve Bearing
0.7500" overall length 17c solid, plain, no outside flanges
00-523-4279
Sleeve Bearing
00-523-4280
Sleeve Bushing
0.1875" first hole diameter 0.7500" overall length 17c solid, plain, no outside flanges
00-523-4935
Sleeve Bearing
0.7500" overall length 17c solid, plain, no outside flanges
00-523-4941
Sleeve Bearing
0.0930" first hole diameter 3.0937" overall length solid, plain, no outside flanges
00-523-4942
Sleeve Bearing
0.0469" first hole diameter 0.8000" overall length anodize surface treated 17c solid, plain, no outside flanges
00-523-4943
Sleeve Bushing
0.2250" overall length 22c solid, external flange one end
00-523-5248
Sleeve Bushing
0.7980" overall length flange 0.78 from center, 1.02 around body- only partial flange 22b segmented, external flange one end
00-523-5253
Sleeve Bushing
0.3470" overall length cadmium left end surface of body surface treated
00-523-5254
Sleeve Bushing
0.4580" overall length cadmium left end surface of body surface treated 22c solid, external flange one end
00-523-5255
Sleeve Bushing
Used on f/rf-4 acft. 0.3470" overall length left hand version of 7430193-02; flange squared one corner 0.740 by 0.840 from center cadmium left end surface of body surface treated 22c solid, external flange one end
