00-004-3256
Washer Thrust Bearing
00-004-3283
Sleeve Bearing Half
3.0000" overall length 17d half sleeve, plain, no outside flanges
00-004-3288
Sleeve Bearing
1.6200" overall length 17c solid, plain, no outside flanges
00-004-4032
Washer Thrust Bearing
0.6200" outside diameter oxide surface treated round
00-004-5059
Sleeve Bushing
0.4300" overall length cadmium surface treated 22c solid, external flange one end
00-004-5169
Plain Spherical Bearing
0.3438" overall length solid
00-004-5231
Sleeve Bearing
1.6250" overall length 17c solid, plain, no outside flanges
00-004-6421
Sleeve Bushing
2.2400" overall length 17c solid, plain, no outside flanges
00-004-6927
Sleeve Bearing
0.0880" first hole diameter 5.0250" overall length 4 holes equally spaced in each groove cadmium surface treated 17c solid, plain, no outside flanges
00-004-6930
Sleeve Bushing
0.1200" overall length left internal flange hole dia concentric w od within 0.0005 in. tir passivate surface treated 17c-1 solid, plain, no outside flanges, internal flange one end
00-004-7035
Sleeve Bushing
0.3360" overall length cadmium surface treated 22c solid, external flange one end
00-004-7041
Sleeve Bearing
0.3900" overall length 22c-1 solid, external flange one end, internal flange one end
00-004-7050
Sleeve Bushing
00-004-7052
Sleeve Bushing
0.3700" overall length 17c solid, plain, no outside flanges
00-004-7064
Sleeve Bushing
0.7380" overall length cadmium or chromate surface treated 22c solid, external flange one end
00-004-7066
Sleeve Bushing
0.6520" overall length passivate surface treated 22c solid, external flange one end
00-004-7067
Sleeve Bushing
0.6470" overall length 22c solid, external flange one end
00-004-7068
Sleeve Bushing
2.2940" overall length cadmium surface treated 22c solid, external flange one end
00-004-7161
Sleeve Bearing
0.9490" overall length reference id to be 0.7435 in. porm 0.0010 in. in a 0.8745 in. porm 0.0005 in. bore, bearing to be checked in a 0.8765 in. dia master block under a 850 pound load 17a split, plain, no outside flanges
00-004-7162
Plain Self-aligning Bearing
0.8745" bore diameter without insert or liner
00-004-7241
Sleeve Bearing
0.5938" overall length 17c solid, plain, no outside flanges
00-004-7242
Sleeve Bearing
0.2700" overall length 22c solid, external flange one end
00-004-7243
Sleeve Bushing
00-004-7495
Sleeve Bushing
0.1450" overall length 17c solid, plain, no outside flanges
00-004-8197
Sleeve Bushing
2.1250" overall length 22c solid, external flange one end
00-004-8205
Sleeve Bushing
1.0625" overall length 22c solid, external flange one end
00-004-8340
Sleeve Bushing
1.1875" overall length 17c solid, plain, no outside flanges
00-004-8896
Sleeve Bushing
1.3050" overall length one side of flange flat 0.575 in. to 0.627 in. from centerline of bore to flat edge passivate surface treated 22c-2 solid, external flange one end, interior flange (s) not located at either end
00-004-9464
Sleeve Bearing
0.2800" overall length 22c solid, external flange one end
00-004-9466
Sleeve Bearing
0.1950" overall length 22c solid, external flange one end
00-004-9478
Sleeve Bearing
1.6130" overall length body od relieved end opposite flange to 3.5625 in.; body id counterbored end opposite flange to 3.1875 in. dia, 0.3730 in. min 22c solid, external flange one end
00-005-0019
Sleeve Bushing
0.3560" overall length cadmium surface treated 22c solid, external flange one end
00-005-0020
Sleeve Bushing
0.3460" overall length cadmium surface treated 22c solid, external flange one end
00-005-0026
Sleeve Bushing
0.7550" overall length cadmium surface treated 17c solid, plain, no outside flanges
00-005-0030
Plain Rod End Bearing
3a thread class right-hand 4.5030" overall length 0.2495" bore diameter 24 thread quantity per inch keyway in shank 0.0980 in. wide by 0.0690 in. deep ball type unjf thread series
00-005-0035
Sleeve Bushing
0.2720" overall length 22c solid, external flange one end
00-005-0041
Sleeve Bearing
00-005-0077
Sleeve Bushing
0.4190" overall length 17c solid, plain, no outside flanges
00-005-0079
Sleeve Bushing
0.2920" overall length passivate surface treated 22c solid, external flange one end
00-005-0088
Linear-rotary Motion Roller
0.375" outside diameter plain
00-005-0089
Plain Rod End Bearing
3a thread class right-hand 3.1100" overall length cadmium surface treated ball type
00-005-0091
Plain Rod End Bearing
3a thread class right-hand 2.7500" overall length 0.3120" bore diameter 0.097 in. w keyway in shank ball type
00-005-0092
Plain Rod End Bearing
3a thread class right-hand 3.0920" overall length 0.5620" bore diameter keyway in shank 0.1300 in. wide ball type
00-005-0099
Sleeve Bushing
0.7320" overall length cadmium surface treated 22c solid, external flange one end
00-005-0100
Sleeve Bushing
0.6720" overall length cadmium surface treated 22c solid, external flange one end
00-005-0427
Sleeve Bearing
00-005-0464
Sleeve Bushing
00-005-0466
Sleeve Bearing
0.3700" overall length 22c solid, external flange one end
00-005-0467
Washer Thrust Bearing
3.3680" outside diameter round
00-005-0489
Sleeve Bearing
0.3120" first hole diameter 0.8600" overall length 17c solid, plain, no outside flanges
