00-317-3663
Sleeve Bearing
0.0740" overall length solid, external flange one end
00-317-3811
Sleeve Bearing
00-317-3920
Sleeve Bearing
3.5000" overall length 18b segmented, external flanges both ends
00-317-4325
Sleeve Bearing
00-317-4525
Washer Thrust Bearing
2.1000" outside diameter round
00-317-4654
Sleeve Bearing
2.2500" overall length 22c solid, external flange one end
00-317-6268
Sleeve Bushing
0.4130" overall length 22c solid, external flange one end
00-317-6277
Sleeve Bearing
0.7760" overall length seal bonded to od one flat on od of flange 0.3210 in. from horizontal center line
00-317-6278
Sleeve Bearing
0.0300" first hole diameter 1.3550" overall length seal bonded to od one flat on od of flange 0.3210 in. from horizontal center line
00-317-6279
Plain Rod End Bearing
3a thread class right-hand 4.1730" overall length 0.8120" bore diameter keyway in shank; threads coated with solid dry film lubricant; shank hollow ball type
00-317-6283
Plain Rod End Bearing
00-317-6288
Linear-rotary Motion Roller
1.000" outside diameter plain
00-317-6289
Sleeve Bushing
1.4100" overall length solid, plain, no outside flanges
00-317-6294
Sleeve Bushing
0.0610" first hole diameter 0.7750" overall length 17c-1 solid, plain, no outside flanges, internal flange one end
00-317-6298
Sleeve Bushing
0.6780" overall length 17c solid, plain, no outside flanges
00-317-6299
Sleeve Bushing
0.6150" overall length 17c solid, plain, no outside flanges
00-317-6310
Sleeve Bushing
0.5290" first hole diameter 3.5600" overall length design analysis; nuclear hardness critical
00-317-6312
Sleeve Bushing
0.2800" first hole diameter 2.0140" overall length 22c solid, external flange one end
00-318-0800
Sleeve Bearing
00-318-1178
Sleeve Bearing Blank
1.3800" overall length 17c solid, plain, no outside flanges
00-318-3194
Sleeve Bushing
1.0262" overall length anodize surface treated 17c solid, plain, no outside flanges
00-318-4796
Sleeve Bushing
00-318-4805
Washer Thrust Bearing
6.2400" outside diameter bearing cut in half with 63 microinch rms finish on faces of cut round
00-318-4925
Sleeve Bearing
40.3750" overall length 22b segmented, external flange one end
00-318-5078
Sleeve Bearing
00-318-6394
Sleeve Bearing
00-318-7238
Sleeve Bearing
3.8120" overall length flycut 0.5000 in. radius by 0.1875 in. w. at end of keyway, left end of bore counterbored 2.0620 in. min. 2.0640 in. max. dia. by 0.2500 in. deep 17c solid, plain, no outside flanges
00-318-8189
Sleeve Bushing
1.6000" overall length 17c solid, plain, no outside flanges
00-318-8460
Sleeve Bearing
0.4800" overall length cadmium surface treated 22c solid, external flange one end
00-318-8500
Sleeve Bushing
0.2635" overall length cadmium surface treated 22c solid, external flange one end
00-318-8650
Sleeve Bushing
0.1550" overall length 22c solid, external flange one end
00-318-8692
Sleeve Bushing
0.5700" overall length 22c solid, external flange one end
00-318-8696
Sleeve Bearing
2.0000" overall length 17c solid, plain, no outside flanges
00-318-8760
Sleeve Bearing
00-319-0201
Sleeve Bearing
00-319-0969
Sleeve Bushing
0.3100" overall length 22c solid, external flange one end
00-319-3091
Sleeve Bearing
2.0000" overall length 17c solid, plain, no outside flanges
00-319-4583
Washer Thrust Bearing
1.7500" outside diameter round
00-319-4822
Sleeve Bearing
00-319-7847
Sleeve Bearing
2.0000" overall length 17c solid, plain, no outside flanges
00-319-7927
Washer Thrust Bearing
1.7500" outside diameter round
00-320-0325
Sleeve Bushing
0.1200" first hole diameter 1.1250" overall length two notches in flange, both 0.1875 in. deep, widths 0.2550 in. 22c solid, external flange one end
00-320-1306
Sleeve Bushing
0.1406" first hole diameter 0.5625" overall length the flange is counter bored to a dia. of 1.000 inch with a variance of plus 0.0013 inch; also the depth of counterbore is 0.078 22c solid, external flange one end
00-320-1307
Sleeve Bushing
1.1220" overall length tin surface treated 22c-1 solid, external flange one end, internal flange one end
00-320-2088
Sleeve Bearing
1.6250" overall length 17c solid, plain, no outside flanges
00-320-2836
Sleeve Bushing
0.5800" overall length 22c solid, external flange one end
00-320-2837
Sleeve Bushing
0.5200" overall length 22c solid, external flange one end
00-320-2839
Sleeve Bushing
0.3000" overall length 22c solid, external flange one end
00-320-4444
Sleeve Bushing
0.9600" overall length 17c solid, plain, no outside flanges
00-320-4449
Sleeve Bushing
0.0780" first hole diameter 3.1920" overall length passivate surface treated 17c solid, plain, no outside flanges
