01-617-5682
Sleeve Bearing
Used on engine,diesel. bearing, sleeve
01-617-5718
Sleeve Bushing
01-617-5748
Plain Self-aligning Bearing
Used on ng nav system. 0.2495" bore diameter bearing, plain, self-aligning, cres, grooved outer race no lubrication required; operating temp range at minus 65 deg f to 400 deg f passivate inner member surface treated without insert or liner with staking groove
01-617-6008
Sleeve Bushing
Used on nsn:3930-01-599-9978. 0.2500" overall length plastic flanged sleeved bearing 22c solid, external flange one end
01-617-6033
Sleeve Bushing
Used on nsn:3930-01-599-9978. 0.0680" overall length machinery bushing 17c solid, plain, no outside flanges
01-617-6183
Washer Thrust Bearing
01-617-6312
Sleeve Bushing
01-617-6328
Sleeve Bearing
01-617-6331
Sleeve Bushing
01-617-6332
Sleeve Bushing
01-617-6336
Sleeve Bushing
01-617-6367
Plain Self-aligning Bearing
Used on nsn:3930-01-599-9978. 2.0000" bore diameter radial spherical plain bearing without insert or liner with staking groove
01-617-6375
Sleeve Bushing
01-617-6479
Plain Self-aligning Bearing
Used on c-17 globemaster iii. 1.2500" bore diameter bearing, plain, self-aligning, cu-be ball, cres race, (with grooved race) -65 deg. f. to 350 deg. f. without insert or liner with staking groove
01-617-6650
Sleeve Bearing
Used on nsn:3930-01-599-9978. 2.0000" overall length manganese bronze bearing oil groove on i.d 0.0350" deep x 0.1880 wide, one inch from end to center. 17c solid, plain, no outside flanges
01-617-6668
Plain Self-aligning Bearing
Used on nsn:3930-01-599-9978. 2.0000" bore diameter spherical polytetrafluoroethylene lined inch bearing chromium surface treated without insert or liner with staking groove
01-617-6692
Plain Self-aligning Bearing
Used on spherical inch plain bearing. 1.5000" bore diameter 3930-01-599-9978 without insert or liner with staking groove
01-617-7322
Sleeve Bushing
Latch pin mechanism instl-down latch safety-nose landing gear
01-617-7601
Plain Self-aligning Bearing
Used on c-17a aircraft. 1.1250" bore diameter bearing, plain, self-aligning without insert or liner
01-617-7693
Stern Tube Bearing Assembly
Used on apl update. bearing assembly
01-617-7719
Sleeve Bearing Half
Used on apl update. bearing, upper cheek
01-617-7912
Sleeve Bushing
Used on c-130lcs. 2.5000" overall length bushing 17c solid, plain, no outside flanges
01-617-7924
Sleeve Bushing
Used on c-130lcs. 0.7500" overall length bushing 17c solid, plain, no outside flanges
01-617-8205
Sleeve Bearing
Used on 1425-01-442-4821. 0.532" overall length iglide plain bearing the id after pressfit is 0.1873 - 0.1892". the housing bore is 0.2497 - 0.2503". the shaft size is 0.1858 - 0.1865". 22c solid, external flange one end
01-617-8387
Sleeve Bearing
Used on ng nav system. 0.3620" overall length chromate outer layer surface treated 22c solid, external flange one end
01-617-9336
Sleeve Bearing
Used on nsn: 1520-01-599-2203. bearing, anti-flail
01-617-9340
Sleeve Bearing
01-617-9610
Washer Thrust Bearing
Used on a/447tns/35. thrust washer
01-617-9775
Sleeve Bushing
Used on e-3 aircraft. 0.2393" overall length bushing, plain, undersize bore cadmium surface treated 17c solid, plain, no outside flanges
01-617-9781
Sleeve Bushing
Used on e-3 aircraft. 0.2793" overall length bushing, plain, undersize bore cadmium surface treated 17c solid, plain, no outside flanges
01-617-9820
Plain Rod End Bearing
01-617-9835
Sleeve Bearing
Used on response boat medium 45 (rbm). 181.000mm overall length sleeve bearing, nitrile lined next higher assembly 4320-01-599-8242 ejector, jet 17c solid, plain, no outside flanges
01-618-0192
Sleeve Bearing
Used on generator,ac p/n 82p0431. 4.0 ins. x 4.0 ins.
01-618-0762
Sleeve Bearing
Used on apl update. 0.7807" overall length karon lined journal bearing karon v lined bore, qualified mil-b-8943 22c solid, external flange one end
01-618-0764
Sleeve Bushing
Bushing, flanged, press fit mechanism inst, nose landing gear, emergency release
01-618-0772
Sleeve Bearing
Used on apl update. 1.0307" overall length karon lined journal bearing karon v lined bore, qualified mil-b-8943 22c solid, external flange one end
01-618-0933
Sleeve Bearing
Used on sentry awacs aircraft. bearing, sleeve
01-618-1553
Sleeve Bushing
Bushing, flanged, press fit mechanism inst-nose landing gear emergency release
01-618-1835
Sleeve Bearing
Used on nsn:2355-22-622-7966. flanged bearing 22c solid, external flange one end
01-618-1871
Washer Thrust Bearing
01-618-1982
Sleeve Bushing
Used on nsn 6625-01-558-8041. 12.0mm overall length press-fit drill bushing 17c solid, plain, no outside flanges
01-618-2209
Washer Thrust Bearing
Used on 10.50,6x0,starboard forward and port crcu thrust bearing assembly winstr2-shoe. 10.5, 6-shoe crcu thrust shoe assembly grvd winstrcw
01-618-2226
Washer Thrust Bearing
Used on 10.50,6x0,starboard forward and port aft lp turbine center thrust bearing assembly. 10.5, 6-shoe ccw crcu thrust shoe assembly, grooved
01-618-2242
Washer Thrust Bearing
Used on 10.5,6x0,starboard forward and port aft thrust brg assy. 10.5, 6 shoe, ccw crcu thrust shoe assembly, grooved
01-618-2396
Plain Rod End Bearing
Used on ge marine gas turbine. LM2500-rf-ml series gas turbine
01-618-3053
Sleeve Bushing
Used on 3930-01-599-9978. 50.8mm overall length 17c solid, plain, no outside flanges
01-618-3056
Sleeve Bearing
Used on OH-58F. bushing
01-618-3064
Sleeve Bearing
Used on OH-58F. bushing
01-618-3128
Sleeve Bearing
Used on OH-58F. bushing
01-618-3134
Sleeve Bearing
Used on OH-58F. bushing
