01-528-7864
Sleeve Bushing
0.3000" overall length chromate outside diameter surface of body surface treated 17c solid, plain, no outside flanges
01-528-7865
Sleeve Bushing
0.2600" overall length cadmium surface treated 22c solid, external flange one end
01-528-7868
Sleeve Bushing
0.5500" overall length chromate outside diameter surface of body surface treated 17c solid, plain, no outside flanges
01-528-7908
Sleeve Bushing
Used on f-22 aircraft.
01-528-7932
Sleeve Bushing
Used on c-17a aircraft. 0.7750" overall length bushing, sleeve-slip fit cadmium surface treated 17c solid, plain, no outside flanges
01-528-8381
Sleeve Bearing Half Set
Used on water purification system. crank pin bearing
01-528-8413
Washer Thrust Bearing
Used on nsn 1925-01-509-7013 tugboat. thrust washer used on clutch-brake compressor E333-3886
01-528-8418
Plain Self-aligning Bearing
Used on nsn 1925-01-509-7013 tugboat. bearing used on clutch-brake compressor E333-3886
01-528-8445
Sleeve Bushing
Used on hydraulic teststand htb-50e. 1.7500" overall length v belt dheave bushing (motor) q-b bushing ethere are holes 22a-2 split, external flange one end, interior flange (s) not located at either end
01-528-8501
Sleeve Bushing
Used on hydraulic teststand htb-50e. 2.8750" overall length v belt sheave bushing (motor) ; split taper bushings outside flange diameter is 5" 22a-1 split, external flange one end, internal flange one end
01-528-8611
Sleeve Bushing
0.8020" overall length cadmium surface treated 22c solid, external flange one end
01-528-8708
Sleeve Bushing
0.1750" overall length passivate surface treated 22c solid, external flange one end
01-528-8709
Sleeve Bushing
0.2250" overall length passivate surface treated 22c solid, external flange one end
01-528-9252
Sleeve Bushing
0.3000" overall length passivate surface treated 22c solid, external flange one end
01-528-9262
Sleeve Bushing
Used on sh2g seasprite helicopter (weapon pylon). 0.3020" overall length press fit; ream type cadmium surface treated 22c solid, external flange one end
01-528-9343
Sleeve Bushing
Used on c-17a aircraft. 0.9150" overall length bushing, lug cadmium surface treated 22c solid, external flange one end
01-528-9428
Sleeve Bushing
Used on drill/breaker model 180. bushing, engine piston pin
01-528-9591
Sleeve Bushing
Used on e-2a; control surfaces outboard rudder attch-fitting. 0.1040" overall length navy: bushing assembly
01-528-9753
Sleeve Bushing
Used on outboard motor, 40 lightning xr.
01-528-9757
Sleeve Bushing
Used on outboard motor, 40 lightning xr.
01-528-9759
Sleeve Bushing
Used on outboard motor, 40 lightning xr.
01-528-9762
Sleeve Bushing
Used on outboard motor, 40 lightning xr.
01-528-9767
Sleeve Bushing
Used on outboard motor, 40 lightning xr.
01-528-9770
Sleeve Bushing
Used on outboard motor, 40 lightning xr.
01-528-9836
Plain Self-aligning Bearing
Used on c-5 aircraft. 2.9990" bore diameter spherical bearing with insert and/or liner with staking groove
01-529-0165
Sleeve Bushing
1.0450" overall length passivate surface treated 22c solid, external flange one end
01-529-0171
Sleeve Bearing
Used on astor, airborne radar. 0.1460" overall length bearing, sleeve, flanged, self-lubricating 22c solid, external flange one end
01-529-0950
Sleeve Bushing
Used on f-22 raptor. 0.3700" overall length bushing-plain, press fit, copper & bronze 17c solid, plain, no outside flanges
01-529-1016
Washer Thrust Bearing
Used on air route surveillance radar 3, arsr3. ARSR3 main bearing retaining cap washer
01-529-1036
Sleeve Bushing
Used on 2320-01-452-5579 yard tractor. bushing metric 17a split, plain, no outside flanges
01-529-1044
Sleeve Bushing
Used on 1520-01-088-3669 ch-47 chinook helicopter. 0.5125" overall length rail pin latch bushing flanged one end passivate body surface treated 17c solid, plain, no outside flanges
01-529-1140
Sleeve Bushing
01-529-1142
Sleeve Bushing
01-529-1167
Sleeve Bushing
01-529-1395
Sleeve Bushing
Used on c-2a; fus-alighting gr drag trunnion spt ftg. 0.7130" overall length navy: bushing assembly cadmium surface treated 22c-2 solid, external flange one end, interior flange (s) not located at either end
01-529-1537
Sleeve Bushing
01-529-1570
Sleeve Bushing
01-529-1699
Sleeve Bearing
Used on aircraft, sentry e3d. 1.7430" overall length bearing assembly, trunnion fitting, nose gear anodize body surface treated 18b segmented, external flanges both ends
01-529-1700
Sleeve Bearing
Used on aircraft, sentry e3d. 1.7430" overall length bearing assembly, trunnion fitting, nose gear anodize body surface treated 18b segmented, external flanges both ends
01-529-1701
Sleeve Bearing
Used on aircraft, sentry e3d. 1.7430" overall length bearing assembly, trunnion fitting, nose gear anodize body surface treated 18b segmented, external flanges both ends
01-529-1702
Sleeve Bearing
Used on aircraft, sentry e3d. 1.7430" overall length bearing assembly, trunnion fitting, nose gear anodize body surface treated 18b segmented, external flanges both ends
01-529-1703
Sleeve Bearing
Used on aircraft, sentry e3d. 1.7430" overall length bearing assembly, trunnion fitting, nose gear anodize body surface treated 18b segmented, external flanges both ends
01-529-1704
Sleeve Bearing
Used on aircraft, sentry e3d. 1.7430" overall length bearing assembly, trunnion fitting, nose gear anodize body surface treated 18b segmented, external flanges both ends
01-529-1705
Sleeve Bearing
Used on aircraft, sentry e3d. 1.7430" overall length bearing assembly, trunnion fitting, nose gear anodize body surface treated 18b segmented, external flanges both ends
01-529-1706
Sleeve Bearing
Used on aircraft, sentry e3d. 1.7430" overall length bearing assembly, trunnion fitting, nose gear anodize body surface treated 18b segmented, external flanges both ends
01-529-1782
Sleeve Bearing
Used on vertical structural., f18e/f nsn 1560-01-529-5523. 1.0000" overall length primer surface treated 22c solid, external flange one end
01-529-1791
Sleeve Bushing
Used on midframe,compressor-compressor sect for the f404-402 eng.
01-529-1792
Sleeve Bushing
01-529-1808
Sleeve Bushing
01-529-1811
Sleeve Bushing
