01-526-8705
Sleeve Bushing
01-526-8706
Sleeve Bushing
01-526-8959
Sleeve Bearing
Used on heavyweight torpedo engine assembly stand. 2.2425" overall length intered bronze sleeve bearing 17c solid, plain, no outside flanges
01-526-8975
Washer Thrust Bearing
Used on tacical water purification system (twps) nsn 4610-01-488-9656.
01-526-8977
Plain Spherical Bearing
Used on uh-60 helicopter, rotary wing aircraft. bearing, plain, spherical c/o 3040-01-240-1753
01-526-9628
Sleeve Bushing
Used on heavyweight torpedo engine assembly stand. 1.5000" overall length headless press fit type-p matt- 52100 tool steel, heat treated 62/64 rc, all press fit bushings are lapped, honed, or gound in the i.d. bushing with i.d. of 1/8" to 1" are concentric with 0.0003" t.i.r. to the o.d. all unground bushing are left rough on the o.d. with concentricity of appx. ".006" t.i.r> no-counterbore bushing are standard with acme. 17c solid, plain, no outside flanges
01-526-9802
Sleeve Bushing
Used on lathe 18in x 60in (mfr id 8064-p). bearing
01-527-0460
Sleeve Bearing Half
Used on a-10 aircraft. 0.1000" hole diameter 0.2500" overall length bearing half-polytetrafluoroethylene lined, flap torque shaft support three flats opposite i.d., two mounting holes 1.445 in. from centerline in -7 only 17d half sleeve, plain, no outside flanges
01-527-0493
Sleeve Bushing
Used on hw-40,hand winch, 4,000 lbs.
01-527-0500
Sleeve Bushing
Used on hw-40,hand winch, 4,000 lbs.
01-527-0663
Sleeve Bearing Set
01-527-0685
Sleeve Bushing
01-527-1507
Sleeve Bearing Half
Used on a-10 aircraft. 0.1000" hole diameter 0.2500" overall length bearing half-polytetrafluoroethylene lined, flap torque shaft support three flats opposite i.d., two mounting holes 1.555 in. from centerline in -5 only 17d half sleeve, plain, no outside flanges
01-527-1948
Sleeve Bushing
01-527-2025
Sleeve Bushing
Used on nose assy-rmv. 0.7500" overall length 17c-1 solid, plain, no outside flanges, internal flange one end
01-527-2069
Sleeve Bushing
01-527-2174
Sleeve Bearing
Used on track roller.
01-527-2484
Bearing Replacement Me Parts Kit
Used on scuttle wtqa. bearing arrangement, interference fit, flush scutle/hatch bushings are solid, manufactured from 316 sst material with our self lubricating liner applied to the inner diameter
01-527-2838
Plain Rod End Bearing
Used on cylinder assembly, hydraulic. 8 inch bore; 48 inch stroke
01-527-2839
Plain Rod End Bearing
Used on cylinder assembly, hydraulic. 8 inch bore; 48 inch stroke
01-527-3312
Sleeve Bushing
0.1400" overall length bushing-flanged, press fit undersize inside diameter cadmium surface treated solid, external flange one end
01-527-3484
Plain Rod End Bearing
01-527-3733
Sleeve Bushing
Used on c-17a aircraft. 0.4500" overall length bushing 22c solid, external flange one end
01-527-3744
Sleeve Bearing Half Set
Used on pump,variable displacement.
01-527-3784
Sleeve Bearing
01-527-3790
Sleeve Bearing
01-527-3837
Sleeve Bearing
01-527-3907
Sleeve Bearing Blank
Bearing
01-527-3928
Sleeve Bushing
01-527-3982
Sleeve Bushing
Used on f110 slep/aeu. bushing for F110 slep
01-527-3983
Sleeve Bushing
Used on f110 slep/aeu. bushing for F110 slep
01-527-4016
Sleeve Bearing
01-527-4246
Sleeve Bushing
1.0650" overall length journal bearing cadmium body surface treated 17c solid, plain, no outside flanges
01-527-4442
Sleeve Bearing Half
Used on compressors naxi 100 & n20nl/n13.5nl.
01-527-4504
Sleeve Bushing
1.1970" overall length journal bearing cadmium body surface treated 17c solid, plain, no outside flanges
01-527-4693
Sleeve Bushing
Used on valve, relief, 1.50ips 1741-t 750psi brz less tail piece.
01-527-5264
Sleeve Bushing
Used on e fwd fuselag. 0.1550" overall length bushing, sleeve plain, press fit, ream type 17c solid, plain, no outside flanges
01-527-5344
Sleeve Bearing
Used on f-15 aircraft. 0.3500" overall length spacer may be made from h.h.smith cage 83330 pn 9184 17c solid, plain, no outside flanges
01-527-5405
Sleeve Bearing
Used on model wcn18, large capacity washer. 1.0600" overall length bushing, insulated bushing, motor hanger 17c solid, plain, no outside flanges
01-527-5909
Sleeve Bushing
Used on assault amphibious vehicle 2350-01-080-9088. 0.7500" overall length 17c solid, plain, no outside flanges
01-527-5921
Sleeve Bushing
Used on pump,rotary.
01-527-5973
Sleeve Bearing
Used on steering group. 60.0mm overall length matt: permaglide P20 plain bearing material- contains lead, not gor foodstuffs or phrmaceutical products; max pv value: pv 3 n/MM2 x m/s; permissible specific bearing load: static- pmax 250 n/MM2, permissable sliding speed vmax 3 m/s; permissable operating temperature: continuous -40 to +110 c, short periods max +140 c; inside of bearing is the lubrication pocket- deformation of lubrication chamfer 17a-2 split, plain, no outside flanges, interior flange (s) not located at either end
01-527-6297
Sleeve Bushing
Used on nuclear reactor boundary area. bushing- throat material: composite; material spec- simsite gr 375; item is designed for an operating life of not less than 10, 000 hours 22e blank, external flange one end
01-527-6404
Sleeve Bushing
01-527-6976
Washer Thrust Bearing
Washer-thrust-2.16od x 1.59od x .075t round
01-527-7074
Washer Thrust Bearing
Used on heavy recovery vehicle. item used to reduce wean on pivotpin
01-527-7107
Sleeve Bushing
01-527-7285
Sleeve Bushing
Used on 1.5x1.25-7 pump. shaft sleeve
01-527-7770
Sleeve Bearing
Used on fighter aircraft-first f18 e/f. navy - bearing, sleeve performance based logistics-stock at vendors site-submit to navicp via daas; flanged, self-lubricating
01-527-7776
Sleeve Bushing
Used on rib,inboard hinge. 0.5230" overall length 22c solid, external flange one end
