01-526-0798
Washer Thrust Bearing
01-526-0916
Sleeve Bearing
0.4225" overall length chromate outer layer surface treated 22c solid, external flange one end
01-526-2219
Sleeve Bearing
Used on waterjet 470hp 2800-3000rpm model no. hj292. 17c solid, plain, no outside flanges
01-526-2338
Sleeve Bushing
Used on B-2. 0.7650" overall length bushing, clamp-up, 15-5ph cres, thin wall, plated od 0.190-1.250 id 17c solid, plain, no outside flanges
01-526-2372
Sleeve Bushing
Used on B-2. 0.7650" overall length bushing, clamp-up, 17-4ph cres, thick wall, bare or coated od 0.190-1.500 id 17c solid, plain, no outside flanges
01-526-2534
Sleeve Bushing
Used on 2320-01-504-5218. 32.0mm overall length sleeve 17a-2 split, plain, no outside flanges, interior flange (s) not located at either end
01-526-2604
Sleeve Bushing
Color natural
01-526-2742
Sleeve Bushing
Used on brake unit assembly. 0.4150" overall length bushing-tie, bolt hole wheel, half bolt diameter is 0.3125" anodize surface treated 22c solid, external flange one end
01-526-2902
Sleeve Bearing
01-526-3206
Sleeve Bushing
1.0670" overall length cadmium surface treated solid, plain, no outside flanges
01-526-3365
Sleeve Bushing
Used on key duplicating maching model 026. bushing, carriage sft
01-526-3456
Sleeve Bushing
Used on f-22raptor. 0.2820" overall length 22c solid, external flange one end
01-526-3999
Sleeve Bushing
0.1600" overall length 17c solid, plain, no outside flanges
01-526-4002
Sleeve Bushing
Used on fighter, aircraft-first.
01-526-4003
Sleeve Bushing
Used on fighter, aircraft-first.
01-526-4016
Sleeve Bushing
Used on structural section; f/a-18e/f. bushing, sleeve-force mate 17c-1 solid, plain, no outside flanges, internal flange one end
01-526-4024
Sleeve Bushing
Used on spar;structural section;f/a-18e/f support of ecp 6038. 0.7500" overall length (navy) bushing, sleeve; (drawing) bushing, sleeve-force mate (ST4M219) inside diameter dry film lubricated cadmium outside diameter surface of flats surface treated 17c solid, plain, no outside flanges
01-526-4108
Sleeve Bearing
Used on waterjet, 470hp 2800-3000 rpm mdl hj292.
01-526-4115
Sleeve Bushing
Used on waterjet , 470 hp 2800-3000 rpm mdl hj292.
01-526-4718
Sleeve Bushing
Used on fixed wing aircraft, mcdonnell douglas f18. 0.2750" overall length 22e blank, external flange one end
01-526-4938
Sleeve Bearing
01-526-4939
Sleeve Bearing
01-526-4955
Sleeve Bearing
Used on tactical water purification sys; twps 4610-01-488-9656.
01-526-4956
Sleeve Bearing
Used on tactical water purification sys; twps 4610-01-488-9656.
01-526-4958
Washer Thrust Bearing
Used on tactical water purification sys; twps 4610-01-488-9656.
01-526-5823
Sleeve Bushing
Used on housing, valve. navy) bushing; (drawing) housing, valve (1001927) 22c solid, external flange one end
01-526-6100
Sleeve Bearing
01-526-6109
Sleeve Bearing
01-526-6526
Sleeve Bearing
Used on saw, power hack. eccentric shaft bearing 17c-1 solid, plain, no outside flanges, internal flange one end
01-526-6615
Sleeve Bushing
Used on f/a-18 e/f. 0.3250" overall length navy) bushing, sleeve - flanged, force mate 22c solid, external flange one end
01-526-6617
Sleeve Bushing
Used on f/a-18e/f. 0.6350" overall length (navy) bushing, sleeve, aircraft chamfer 0.005 to 0.015 x 45deg; 1hole in middle; bushing-clamp-up; not intended for reaming on assy-designed for clamping to shaft with relative motion occurring on bushing od only@ passivate body surface treated 17c solid, plain, no outside flanges
01-526-6627
Plain Self-aligning Bearing
Used on fighter aircraft (f18 e/f). bearing, plain, self
01-526-6633
Sleeve Bushing
01-526-6634
Sleeve Bushing
Used on f/a-18 e/f. 0.3250" overall length navy) bushing, sleeve - flanged, force mate 22c solid, external flange one end
01-526-6635
Sleeve Bushing
Used on f/a-18 e/f. 0.1950" overall length navy) bushing, sleeve - flanged, force mate 22c solid, external flange one end
01-526-6747
Sleeve Bushing
01-526-6749
Sleeve Bushing
Used on 3805015153766.
01-526-6818
Sleeve Bushing
Used on centerline camera installation ilarts, 627682-1. 0.7190" overall length alignment bearing oxide surface treated 17c solid, plain, no outside flanges
01-526-6959
Sleeve Bushing
Used on disintegrator model 325snxp. bushing, pinion shaft
01-526-6961
Sleeve Bushing
Used on disintegrator model 325snxp. bushing set, quill
01-526-6986
Sleeve Bushing
Used on disintegrator model 325snxp. bushing, spindle lower
01-526-7303
Sleeve Bushing
Used on harrier; inner/outer. navy: bushing, sleeve material: beryllium copper, alloy C17200, temper TF00; id=0.4325 inch; od=0.4994; length=0.490; groove=0.4334; od
01-526-7384
Plain Self-aligning Bearing
Used on f/a-18e/f hornet aircraft; inner/outer. 0.7495" bore diameter navy:bearing, plain, self-aligning bearing, plain, self-aligning, self-lubricating, grooved outer race, stainless steel ball passivate inner member surface treated without insert or liner with staking groove
01-526-7553
Sleeve Bearing
01-526-7624
Sleeve Bearing
Used on housing assembly main pump 820452 tf33 engine. bearing 17a split, plain, no outside flanges
01-526-7722
Plain Spherical Bearing
Used on b1-b bomber. 1.7670" overall length ball, spherical nacelle attach flg solid
01-526-7878
Sleeve Bearing
Used on housing assembly of main pump 820459 tf33 engine. bearing 17c solid, plain, no outside flanges
01-526-8069
Sleeve Bearing
01-526-8097
Sleeve Bearing
01-526-8540
Linear-rotary Motion Roller
Used on l-1011 tristar aircraft. roller, cam flight station center
