01-519-8721
Washer Thrust Bearing
01-519-8725
Sleeve Bearing
01-519-8728
Sleeve Bearing
01-519-8841
Sleeve Bushing
Used on loader lift frame for w20c loader 3805-01-273-5389. bucket pivot bushing
01-519-8936
Sleeve Bushing
Used on f/a-22 raptor. 2.2100" overall length bearing recoil fwd 22c-1 solid, external flange one end, internal flange one end
01-519-8962
Washer Thrust Bearing
Washer, bearing, aircraft
01-520-3466
Sleeve Bushing
Used on RAPTOR. 0.4850" overall length bushing plain (for clamped installation) chromium outside diameter surface of body surface treated 17c solid, plain, no outside flanges
01-520-3641
Bearing Replacement Me Parts Kit
Used on sheave 18 inch od. kit include 2- thrust washer, 1 - roller bearing
01-520-3643
Bearing Replacement Me Parts Kit
Used on sheave 18 inch od. kit include 2- thrust washer, 1 - roller bearing
01-520-3650
Sleeve Bearing
01-520-3729
Sleeve Bearing
Used on nsn 1520-01-088-3669 ch47d helicopter. 5.7000" overall length bearing, slide block, forward, outboard, left side 17d half sleeve, plain, no outside flanges
01-520-3903
Sleeve Bearing
01-520-3943
Sleeve Bearing
Used on logistic escape trunk, upper hatch assy. 0.7500" overall length 22c solid, external flange one end
01-520-3945
Sleeve Bearing
01-520-3955
Sleeve Bearing
01-520-4350
Sleeve Bushing
Used on bushing, q.c. vds transfer hoist. 1.8900" overall length plated steel. fits q.d. sprokets with bushing "sh"., installation torque: 125 ft lbs., max transmissible torque: 4380 lbs. next assembly ej-42180, final assembly ej-52046. 22c solid, external flange one end
01-520-4412
Sleeve Bushing
Used on f-22 aircraft. 0.8050" overall length bushing, plain, spacer 22c solid, external flange one end
01-520-4894
Sleeve Bearing
01-520-5218
Sleeve Bushing
Used on ecp n-244-r1.
01-520-5223
Sleeve Bushing
Used on ecp n-244-r1.
01-520-5245
Washer Thrust Bearing
01-520-5287
Sleeve Bearing
01-520-5293
Sleeve Bearing Half Set
Used on engine group. consists of an upper
01-520-5363
Sleeve Bushing
01-520-5469
Sleeve Bushing
0.1820" overall length cadmium surface treated solid, external flange one end
01-520-5470
Sleeve Bushing
0.1200" overall length cadmium surface treated solid, plain, no outside flanges
01-520-5471
Sleeve Bushing
0.3900" overall length cadmium surface treated solid, external flange one end
01-520-5472
Sleeve Bushing
0.1100" overall length cadmium surface treated solid, plain, no outside flanges
01-520-5473
Sleeve Bushing
0.4400" overall length cadmium surface treated 17c solid, plain, no outside flanges
01-520-5476
Sleeve Bushing
0.3600" overall length cadmium surface treated solid, plain, no outside flanges
01-520-5626
Sleeve Bearing
Used on 2350-01-081-8138. 0.7500" overall length bearing, sleeve operating temp min is minus 200 deg 17c solid, plain, no outside flanges
01-520-5891
Linear-rotary Motion Roller
01-520-6277
Plain Self-aligning Bearing
0.1895" bore diameter cadmium outer race member surface treated with insert and/or liner with staking groove
01-520-6398
Plain Rod End Bearing
0.3120" bore diameter ball type
01-520-6545
Washer Thrust Bearing
Used on 4210014861035.
01-520-6705
Sleeve Bushing
Used on block iii rf. 0.3500" overall length navy: bushing, yoke flange end inside diameter is countersunk 0.410 x 90 degrees. 0.060 inch stepped length extension x 0.260 inch diameter beyond main body of bushing. 22c solid, external flange one end
01-520-6728
Sleeve Bushing
Used on f-22 aircraft. 0.3650" overall length bushing sleeve, plain, press fit, ream type 17c solid, plain, no outside flanges
01-520-6729
Sleeve Bushing
Used on f-22 aircraft. 0.5420" overall length bushing-flanged, press fit steel, bronze & copper 22c solid, external flange one end
01-520-6784
Washer Thrust Bearing
01-520-6811
Sleeve Bearing
01-520-7075
Sleeve Bushing
Used on f-22 aircraft. 0.3650" overall length bushing, sleeve plain, press fit, ream type 17c solid, plain, no outside flanges
01-520-7428
Sleeve Bushing
Used on mh-60r reman. 0.4150" overall length navy: bushing bushing, sleeve-press fit undersize inside diameter. .013 lbs./piece cadmium surface treated 17c solid, plain, no outside flanges
01-520-7453
Sleeve Bushing
Used on mh-60r reman. 0.5450" overall length navy: bushing bushing, sleeve-press fit undersize inside diameter. 0.017 lbs./piece cadmium surface treated 17c solid, plain, no outside flanges
01-520-7455
Sleeve Bushing
0.2650" overall length passivate body surface treated 22e blank, external flange one end
01-520-7748
Sleeve Bushing
0.2020" overall length passivate body surface treated 22e blank, external flange one end
01-520-7788
Sleeve Bushing
Used on f-22 aircraft. 0.4850" overall length bushing, plain, spacer 22c solid, external flange one end
01-520-7880
Plain Self-aligning Bearing
Used on newman mh-60. 0.9995" bore diameter navy:bearing bearing, plain, self-lubricating, self-aligning, low speed, narrow grooved outer ring, -65 degrees to 325 degrees f. zinc outer race member surface treated with insert and/or liner with staking groove
01-520-8265
Sleeve Bushing
Used on 2320014950110.
01-520-8296
Plain Rod End Bearing
Used on fixed winged aircraft, c130j. rod end bearing
01-520-8297
Plain Rod End Bearing
Used on fixed wing aircraft, c130j. right-hand rod end bearing
