01-480-5304
Sleeve Bearing
Used on hatches and hull doors. 1.1250" overall length material is oilite 17c solid, plain, no outside flanges
01-480-5306
Sleeve Bushing
Used on hatches and hull doors. 0.3750" overall length 17c solid, plain, no outside flanges
01-480-5428
Washer Thrust Bearing
Used on ball valve;los angeles class ssn (688). 2.7188" outside diameter round
01-480-5450
Sleeve Bushing
Used on sh-2 seasprite helicopter. 0.4785" overall length bushing-pivot pedal support nha pn K653002 phosphate surface treated solid, plain, no outside flanges
01-480-5609
Sleeve Bearing
Used on rough terrain container handler (rtch), model rt 240, direct vendor delivery (dvd), nsn 3990-01-473-3998, cage 1nwy2, part number: tra240-55s3m, tm 10-3930-675, contract number: daae07-99-c-s008.
01-480-5612
Sleeve Bushing
Used on brough terrain container handler (rtch), model rt 240, direct vendor delivery (dvd), nsn 3990-01-473-3998, cage 1nwy2, part number: tra240-55s3m, tm 10-3930-675, contract number: daae07-99-c-s008.
01-480-5625
Sleeve Bearing
Used on brough terrain container handler (rtch), model rt 240, direct vendor delivery (dvd), nsn 3990-01-473-3998, cage 1nwy2, part number: tra240-55s3m, tm 10-3930-675, contract number: daae07-99-c-s008.
01-480-5667
Washer Thrust Bearing
Used on valve assy ball, combination hull & backup 4" 0.700 psi. 2.1150" outside diameter round
01-480-5669
Washer Thrust Bearing
Used on valve assy ball, combination hull & back up 4" 0-700 psi. 1.7400" outside diameter round
01-480-5676
Sleeve Bearing
Used on hatches and hull doors. 1.7500" overall length material is oilite comp 17c solid, plain, no outside flanges
01-480-5680
Sleeve Bushing
Used on hatches and hull doors. 2.1250" overall length bushingnoper shaft 17c solid, plain, no outside flanges
01-480-5699
Sleeve Bushing
Used on 900lb asa gate valve 5,6,8,10,12,14 & 16 sizes welding ends. 0.3900" overall length 17c solid, plain, no outside flanges
01-480-5715
Washer Thrust Bearing
Used on 10,500 lb l.s. weapons elev, 3rd deck hatch dogging det. 3.5000" outside diameter round
01-480-6070
Sleeve Bushing
Used on manifold assy, control hydraulic.
01-480-6072
Sleeve Bushing
Used on manifold assy, control hydraulic.
01-480-6125
Sleeve Bushing
Used on ah-64d apache helicopter, nsn 1520-01-355-8250. 1.2940" overall length 22c solid, external flange one end
01-480-6151
Washer Thrust Bearing
Used on valve ball 2" ips 4500 psi emer mbt blow hull stop assy. 1.2370" outside diameter round
01-480-6254
Sleeve Bushing
Used on nh500 helicopter. sleeve
01-480-6408
Sleeve Bushing
Used on f18 e/f. 0.0780" first hole diameter 1.2210" overall length bushing-clamp-up, corrosion resistant steel passivate surface treated 17c solid, plain, no outside flanges
01-480-7079
Sleeve Bushing
01-480-7167
Sleeve Bushing
01-480-7862
Sleeve Bushing Half
Used on acft carrier cvn 70, stern tube & strut bearings. half bushing, top 8 threaded holes; 1.25", 12 threaded holes; 1", 18 drill holes; 1.1875"
01-480-7865
Sleeve Bushing Half
Used on acft carrier cvn 70, stern tube & strut bearings. half bushing, bottom 8 threaded holes; 1.25", 12 threaded holes; 1", 18 drill holes; 1.1875"
01-480-7867
Sleeve Bushing Half
Used on acft carrier cvn 70, stern tube & strut bearings. half bushing, top 8 threaded holes; 1.25", 18 threaded holes; 1.125", 18 drill holes; 1.1875"
01-480-7868
Sleeve Bushing Half
Used on acft carrier cvn 70, stern tube & strut bearings. half bushing, bottom 8 threaded holes; 1.25", 18 threaded holes; 1.125", 18 drill holes; 1.1875"
01-480-7872
Sleeve Bushing Half
Used on acft carrier cvn 70, stern tube & strut bearings. half bushing, top 8 threaded holes; 1.25", 18 drill holes; 1.1875"
01-480-7873
Sleeve Bushing Half
Used on acft carrier cvn 70, stern tube & strut bearings. half bushing, bottom 8 threaded holes; 1.25", 18 drill holes; 1.1875"
01-480-7874
Sleeve Bushing Half
Used on acft carrier cvn 70, stern tube & strut bearings. half bushing, top 8 threaded holes; 1.25", 6 threaded holes; 1.5", 4 threaded holes; 1.5"
01-480-7876
Sleeve Bushing Half
Used on acft carrier cvn 70, stern tube & strut bearings. half bushing, bottom 8 threaded holes; 1.25", 6 threaded holes; 1.5", 4 threaded holes; 1.5"
01-480-7923
Sleeve Bushing
0.6250" overall length 17c solid, plain, no outside flanges
01-480-7926
Sleeve Bearing
Used on elevators,cargo/weapoons. 1.1825" overall length 22c solid, external flange one end
01-480-8169
Sleeve Bushing
Used on f18 e/f. 1.0890" overall length bvusdhing-plain, press fit, copper cadmium surface treated 17c solid, plain, no outside flanges
01-480-8173
Sleeve Bushing
Used on f18 e/f. 0.3950" overall length bushing, sleeve-flanged, press fit copper alloy surface treated 22c solid, external flange one end
01-480-8176
Sleeve Bushing
Used on support structural acft. 0.3950" overall length 17c solid, plain, no outside flanges
01-480-8180
Plain Self-aligning Bearing
Used on f18 e/f. 1.9995" outside diameter bearing, plain, self-aligning-grooved outer ring, cres ball operating temperature minus 65 degrees fahrenheit to 275 degrees fahren heit passivate internal inner member surface treated plain bearing, outer ring with insert and/or liner
01-480-8194
Sleeve Bushing
Used on f18 e/f. 0.1200" overall length bushing, sleeve-stake, flanged, press fit, special bushing shows grooved area before flanged on outside area:inside diameter opposite flange tapered aluminum alloy outside diameter surface of body surface treated 22c solid, external flange one end
01-480-8196
Sleeve Bushing
Used on f18 e/f. 0.2750" overall length bushing, sleeve-stake, flanged, press fit, special bushing shows grooved area before flanged on outside area:inside diameter opposite flange tapered aluminum alloy outside diameter surface of body surface treated 22c solid, external flange one end
01-480-8211
Sleeve Bushing
Used on f18 e/f. 0.2650" overall length bushing, sleeve-stake, flanged, press fit, special bushing shows grooved area before flanged on outside area:inside diameter opposite flange tapered aluminum alloy outside diameter surface of body surface treated 22c solid, external flange one end
01-480-8261
Sleeve Bushing
Used on f18 e/f. 0.6630" overall length bushing, sleeve-tapered flange, press fit, special finish ion vapordeposited high purity alumimum aluminum alloy surface treated 22c solid, external flange one end
01-480-8262
Sleeve Bushing
Used on f18 e/f. 0.4750" overall length bushing, sleeve-tapered flange, press fit, special finish ion vapordeposited high purity alumimum aluminum alloy surface treated 22c solid, external flange one end
01-480-8263
Sleeve Bushing
Used on f18 e/f. 0.5400" overall length bushing, sleeve-plain, press fit aluminum alloy outside diameter surface of body surface treated 17c solid, plain, no outside flanges
01-480-8265
Sleeve Bushing
Used on f18 e/f. 0.4900" overall length bushing, sleeve-plain, press fit aluminum alloy outside diameter surface of body surface treated 17c solid, plain, no outside flanges
01-480-8293
Sleeve Bushing
Used on support of pre-provisioning items for which navicp-phil acts as poe. 0.8070" overall length bushing-flanged, press fit steel, bronze color-yellow chromate cadmium surface treated 22c solid, external flange one end
01-480-8332
Sleeve Bushing
Used on f18 e/f. 0.3350" overall length bushing, sleeve-stake, flanged, press fit, special bushing shows grooved area before flanged on outside area:inside diameter opposite flange tapered aluminum alloy outside diameter surface of body surface treated 22c solid, external flange one end
01-480-8457
Sleeve Bushing
Used on f/a-18e/f. (navy) bushing, sleeve, aircraft
01-480-8475
Sleeve Bushing
Used on valve, gate.
01-480-8539
Sleeve Bushing
Used on lm2500 machinery control systems. 0.1250" overall length
01-480-8540
Sleeve Bushing
Used on lm2500 machinery control systems. 0.2500" overall length
01-480-8546
Sleeve Bushing
Used on lm2500 machinery control systems. 0.5000" overall length
01-480-8611
Sleeve Bearing
