01-468-9606
Sleeve Bushing
Used on nimitz class cvn. 1.0000" overall length 17c solid, plain, no outside flanges
01-469-0305
Washer Thrust Bearing
Used on compressor, ticondroga class cg (47). 4.0000" outside diameter
01-469-0362
Sleeve Bushing
Used on marine hardware. 1.5000" overall length bushing is champfered, both ends, .005X45 degrees 17c solid, plain, no outside flanges
01-469-0374
Sleeve Bushing
Used on diaphragm control valve,actuator sizes 55, 55r, 85, 85r, nimitz class cvn.
01-469-0380
Sleeve Bushing
Used on diaphragm control valve with h.o. device and positioner, nimitz class cvn.
01-469-0381
Sleeve Bushing
Used on marine hardware. 4.0000" overall length bushing is champfered, both ends, .005X45 degrees 17c solid, plain, no outside flanges
01-469-0440
Sleeve Bearing Set
Used on nha: bevel gear operator, e/i: 170' patrol coastal (pc-1). bearing spacer" assigned by commercial organization set c/o: 2-bearing sleeves, material: carbon steel, 1st component: i/d-1.778, o/d-2.250, & o/l-0.750, 2nd component: i/d-1.778, o/d-2.250, & o/l-0.688 all dimensions are in".
01-469-0847
Sleeve Bushing
Used on nsn 1520-01-355-8250. 0.3388" overall length cadmium surface treated 17c solid, plain, no outside flanges
01-469-0902
Sleeve Bushing
Used on c17a acft. 0.4850" overall length 22c solid, external flange one end
01-469-0910
Sleeve Bushing
Used on c17a acft. 0.3700" overall length 22c solid, external flange one end
01-469-1301
Sleeve Bearing
Used on compressor rf, ticonderoga class cg (47).
01-469-1312
Sleeve Bearing
01-469-1402
Sleeve Bearing
Used on compressor.
01-469-1430
Plain Self-aligning Bearing
Used on first pbl; support, structural; f/a-18e model code to support ecp 6038; aircraft model code for f/a-18e/f.
01-469-1434
Sleeve Bushing
Used on f18 e/f. 1.0650" overall length bushing-sleeve-flanged, special 22c solid, external flange one end
01-469-1435
Sleeve Bushing
Used on f18 e/f. 0.1100" overall length bushing-sleeve-flanged, special 22c solid, external flange one end
01-469-1485
Sleeve Bushing
Used on f-18 e/f. 0.5900" overall length intended for ream on assembly 17c solid, plain, no outside flanges
01-469-1492
Sleeve Bushing
01-469-1495
Sleeve Bushing
Used on f-18 e/f. 0.5900" overall length intended for ream on assembly cadmium surface treated 17c solid, plain, no outside flanges
01-469-1504
Sleeve Bushing
Used on f-18 e/f. 0.5900" overall length intended for ream on assembly 17c solid, plain, no outside flanges
01-469-1831
Plain Self-aligning Bearing
Used on acft b2 bomber (atb).
01-469-1840
Sleeve Bushing
Used on tow bar (md-1).
01-469-1859
Sleeve Bushing
Used on arleigh burke class ddg. 1.0620" overall length 22c solid, external flange one end
01-469-1865
Sleeve Bushing
Used on arleigh burke class ddg. 1.1250" overall length 17c solid, plain, no outside flanges
01-469-2260
Bearing Replacement Me Parts Kit
01-469-2457
Sleeve Bushing
Used on 3" bolted cover swing check valve.
01-469-2473
Sleeve Bearing
01-469-2480
Sleeve Bearing
01-469-2484
Sleeve Bushing
Used on diaphragm control valve, 8", class dvtnss assy, details & l/m.
01-469-2530
Sleeve Bushing
Used on regulating relief valve.
01-469-2557
Sleeve Bushing
01-469-2579
Sleeve Bushing
01-469-2594
Sleeve Bushing
Used on fighter aircraft-first (f18 e/f).
01-469-2597
Sleeve Bushing
Used on fighter aircraft-first (f18 e/f).
01-469-2773
Sleeve Bushing
Used on f-18e/f. 0.2100" overall length 22c solid, external flange one end
01-469-3007
Sleeve Bushing
Used on c-130 acft. 1.7200" overall length bushing, augmentation system 22c solid, external flange one end
01-469-3253
Sleeve Bushing
01-469-3259
Sleeve Bushing
01-469-3469
Sleeve Bearing
01-469-3479
Washer Thrust Bearing
0.8100" outside diameter round
01-469-3481
Washer Thrust Bearing
01-469-3485
Sleeve Bearing
Used on fa18e&f. 2.9000" overall length 22c solid, external flange one end
01-469-3492
Sleeve Bearing
Used on first pbl item; pump,fuel,metering. bearing, upper
01-469-3495
Sleeve Bearing
Used on f/a-18 e&f. 0.5000" overall length note 5 pre dwg-groove is to be right hand wound 2 turns per inch 17c solid, plain, no outside flanges
01-469-5633
Sleeve Bushing
0.5640" overall length wiper bushing nickel surface treated
01-469-5636
Sleeve Bushing
0.1450" overall length wiper collar 22c solid, external flange one end
01-469-6146
Sleeve Bearing
Used on HATCH. 0.7500" overall length 17c solid, plain, no outside flanges
01-469-6201
Sleeve Bushing
0.1000" overall length busing, swage, cres for use in panels of carbon epoxy, aluminum, passivate surface treated 22c solid, external flange one end
01-469-6299
Sleeve Bushing
Used on nha aluminimum accommodation ladder feathering tread, e/i cimmaron class ao. 2.0000" overall length 17c solid, plain, no outside flanges
01-469-6315
Sleeve Bushing
Used on nha aluminimum accommodation ladder feathering tread, e/i cimmaron class ao. 0.7500" overall length 17c solid, plain, no outside flanges
