01-316-6304
Sleeve Bushing
0.0880" first hole diameter 0.5850" overall length this repair bushing will replace the original bushing, p/n's 2006404-169 22c solid, external flange one end
01-316-7093
Sleeve Bushing
0.6900" overall length no cadmium plate on face of bushing flange or id; item used on nose landing gear lower torque arm of c-141 cadmium surface treated 22c solid, external flange one end
01-316-7094
Sleeve Bushing
0.0930" first hole diameter 1.2500" overall length no cadmium plate on face of bushing flange or id; diameter of groove IS1.6270 in., with a 0.0620 radius; itemis used on nose landing gear, lower torque arm of the c-141 acft cadmium surface treated 22c solid, external flange one end
01-316-7294
Linear-rotary Motion Roller
Used on conveyor,vertical tray.
01-316-7594
Sleeve Bearing
01-316-7595
Sleeve Bushing
01-316-8046
Sleeve Bearing
2.3200" overall length 17c solid, plain, no outside flanges
01-316-8047
Sleeve Bearing
0.2188" first hole diameter 1.3438" overall length 22c solid, external flange one end
01-316-8048
Sleeve Bearing
5.0000" overall length 17c solid, plain, no outside flanges
01-316-8049
Sleeve Bushing
0.2850" overall length cadmium surface treated 17c solid, plain, no outside flanges
01-316-8219
Sleeve Bushing
01-316-8315
Sleeve Bushing
Used on f-18 acft fuel system.
01-316-8978
Sleeve Bearing
17c solid, plain, no outside flanges
01-316-8979
Sleeve Bearing
5.575mm overall length 22c solid, external flange one end
01-316-8980
Sleeve Bearing
5.0000" overall length outside diameter on left side reduced to 1.7500 in. diea 17c solid, plain, no outside flanges
01-316-8981
Sleeve Bushing
0.0600" first hole diameter 0.9270" overall length cadmium left end surface of body surface treated 22c solid, external flange one end
01-316-8982
Sleeve Bushing
2.2450" overall length cadmium surface treated 17c solid, plain, no outside flanges
01-316-8983
Sleeve Bushing
0.4800" overall length this repair bushing will replace the original bushing, p/n's 2006404-151 passivate surface treated 17c solid, plain, no outside flanges
01-316-9619
Sleeve Bearing
01-316-9620
Sleeve Bushing
01-316-9638
Plain Self-aligning Bearing
Used on aircraft model mh-53e.
01-316-9845
Sleeve Bushing
2.6900" overall length refer to t.o. 4S1-56-3 fig. 5-2; item is used in repair of the kc-135 main landing gear, aircraft, torque lug, part of outer cylinder assembly cadmium surface treated 17c solid, plain, no outside flanges
01-316-9846
Sleeve Bushing
Ref. t.o. 4A4-18-3
01-316-9847
Sleeve Bushing
0.8420" overall length item used on emergency release handle assy, nose landing gear of c-141 acft at installation cadmium surface treated 17c solid, plain, no outside flanges
01-316-9848
Plain Self-aligning Bearing
0.7495" bore diameter bearing is primarily intended foruse in hydraulic actuator of F111 chromate inner member surface treated with insert and/or liner with staking groove
01-316-9849
Washer Thrust Bearing
0.6450" outside diameter item used on F100PW0229 engine round
01-317-0047
Sleeve Bearing
01-317-0051
Washer Thrust Bearing
01-317-0106
Sleeve Bushing
0.3620" overall length chromate surface treated 21c solid, external flange
01-317-0107
Sleeve Bushing
0.1750" overall length 17c solid, plain, no outside flanges
01-317-0167
Linear-rotary Motion Roller
01-317-0360
Sleeve Bushing
01-317-0537
Sleeve Bearing
0.7450" overall length 17c solid, plain, no outside flanges
01-317-0538
Sleeve Bushing
1.2250" overall length passivate surface treated 22c solid, external flange one end
01-317-0539
Sleeve Bushing
0.3500" overall length 22c solid, external flange one end
01-317-0540
Sleeve Bushing
1.1150" overall length 17c solid, plain, no outside flanges
01-317-0547
Plain Self-aligning Bearing
2.7500" bore diameter chromium inner member surface treated with insert and/or liner
01-317-1156
Sleeve Bushing
1.1250" overall length 0.312-24 unf-3b thd hole 2 places on 4.625 in. dia bc; 0.343 in. hole 8 places on 4.625 in. dia bc flanged end
01-317-1708
Washer Thrust Bearing
01-317-1861
Sleeve Bearing
01-317-1862
Sleeve Bearing
01-317-1863
Sleeve Bearing
01-317-1864
Sleeve Bearing
0.9800" overall length 17c solid, plain, no outside flanges
01-317-1865
Sleeve Bearing
3.9290" overall length 17c solid, plain, no outside flanges
01-317-1866
Sleeve Bushing
01-317-1867
Sleeve Bushing
5.2500" overall length 22c solid, external flange one end
01-317-1868
Sleeve Bushing
4.9375" overall length 17c solid, plain, no outside flanges
01-317-1869
Sleeve Bushing
1.5700" overall length 17c solid, plain, no outside flanges
01-317-2197
Sleeve Bearing
4.9500" overall length 17c solid, plain, no outside flanges
01-317-2198
Sleeve Bearing
0.4060" overall length right internal flange width 32.0 microin finish phosphate manganese surface treated 17c-1 solid, plain, no outside flanges, internal flange one end
