01-260-8854
Sleeve Bushing
01-260-8855
Sleeve Bushing
01-260-8856
Sleeve Bushing
01-260-8893
Sleeve Bearing Set
01-260-8906
Bearing Replacement Me Parts Kit
01-260-8973
Sleeve Bushing
0.2475" overall length 22c solid, external flange one end
01-260-8974
Sleeve Bushing
1.1300" overall length four notches on left end surface of body plastic epoxy surface treated 17c solid, plain, no outside flanges
01-260-8976
Sleeve Bushing
0.7500" overall length 17c-1 solid, plain, no outside flanges, internal flange one end
01-260-8977
Sleeve Bushing
1.1850" overall length cadmium outside diameter surface of body surface treated 17c solid, plain, no outside flanges
01-260-8978
Plain Rod End Bearing
01-260-9116
Sleeve Bushing
01-260-9117
Sleeve Bushing
01-260-9426
Sleeve Bearing
0.1660" overall length 17c solid, plain, no outside flanges
01-260-9427
Sleeve Bushing
4.750 in. l passivate surface treated
01-260-9428
Sleeve Bushing
1.6140" overall length 22c solid, external flange one end
01-260-9429
Plain Self-aligning Bearing
0.9995" bore diameter items are being coded as critical to insure source inspection will be performed at the point of manufacture, prior to material receipt by the us navy or other dod components. these items are piece parts or end items in support of vital military hardware necessary to sustain the successful mission of the ships, submarines, without insert or liner
01-260-9790
Sleeve Bearing
01-260-9791
Sleeve Bushing
01-260-9792
Sleeve Bushing
01-260-9793
Sleeve Bushing
2.2450" overall length 17c solid, plain, no outside flanges
01-260-9879
Sleeve Bearing
0.7500" overall length 22c solid, external flange one end
01-260-9880
Sleeve Bearing
0.6900" overall length 22c solid, external flange one end
01-260-9881
Sleeve Bearing
0.3750" overall length 17c solid, plain, no outside flanges
01-260-9882
Sleeve Bushing
0.1270" first hole diameter 0.1420" overall length cadmium surface treated
01-260-9884
Sleeve Bushing
0.8100" overall length od relieved 1.310 in. dia, 0.440 in. dia from right end 22c solid, external flange one end
01-260-9885
Sleeve Bushing
0.4220" overall length cadmium surface treated 22c solid, external flange one end
01-260-9886
Sleeve Bushing
0.3170" overall length 17c solid, plain, no outside flanges
01-260-9909
Bearing Replacement Me Parts Kit
01-261-0684
Sleeve Bushing
0.3800" overall length 22c solid, external flange one end
01-261-0848
Sleeve Bearing
01-261-0849
Sleeve Bushing
0.6920" overall length chromium left end surface of body surface treated 17c solid, plain, no outside flanges
01-261-1525
Sleeve Bushing
3.3800" overall length used on mark iv trans/wet/ter cadmium surface treated 17c solid, plain, no outside flanges
01-261-1526
Sleeve Bushing
0.1250" overall length passivate surface treated 17c solid, plain, no outside flanges
01-261-1613
Washer Thrust Bearing
0.3730" outside diameter no center hole round
01-261-2780
Sleeve Bearing
0.3960" overall length 22c solid, external flange one end
01-261-2933
Plain Rod End Bearing
3.3900" overall length 0.8115" bore diameter ball type
01-261-4251
Sleeve Bushing
01-261-4252
Sleeve Bushing
01-261-4350
Sleeve Bushing
0.3900" overall length 22c solid, external flange one end
01-261-5642
Sleeve Bushing
0.3850" overall length passivate surface treated 22c solid, external flange one end
01-261-5865
Sleeve Bearing
Repair part for nsn 6515-01-291-5447, cutter, orthopedic cast; model no. 840; by striker corp
01-261-5866
Washer Thrust Bearing
Repair part for nsn 6520-00-103-2858; handpiece dental; model no. 53873; by den-tal-ez dental products inc.
01-261-6316
Linear-rotary Motion Roller
Used in aerial refueling coupling 1680005440967 plain
01-262-0454
Sleeve Bearing
0.6880" overall length 22c solid, external flange one end
01-262-0455
Plain Self-aligning Bearing
0.6245" bore diameter race chromate inner member surface treated without insert or liner
01-262-1384
Sleeve Bushing
0.9800" overall length 17c solid, plain, no outside flanges
01-262-1385
Sleeve Bushing
1.7500" overall length used on f-15 anodize surface treated 17c solid, plain, no outside flanges
01-262-1387
Sleeve Bushing
1.3500" overall length used on f-15 anodize surface treated 17c solid, plain, no outside flanges
01-262-1388
Sleeve Bushing
1.9500" overall length used on f-15 anodize surface treated 17c solid, plain, no outside flanges
01-262-1389
Sleeve Bushing
2.2500" overall length used on f-15 anodize surface treated 17c solid, plain, no outside flanges
