01-244-4590
Sleeve Bearing
01-244-4592
Sleeve Bearing
0.1900" first hole diameter 2.7400" overall length hole threaded 22c solid, external flange one end
01-244-4593
Sleeve Bearing
0.7450" overall length 22c solid, external flange one end
01-244-4594
Sleeve Bushing
17c solid, plain, no outside flanges
01-244-4595
Sleeve Bushing
17c solid, plain, no outside flanges
01-244-4596
Sleeve Bushing
0.3350" overall length 17c solid, plain, no outside flanges
01-244-4597
Sleeve Bushing
01-244-4598
Sleeve Bushing
01-244-4599
Sleeve Bushing
01-244-4604
Sleeve Bushing
0.8020" overall length cadmium surface treated 22c solid, external flange one end
01-244-4606
Plain Self-aligning Bearing
80.0mm bore diameter with insert and/or liner
01-244-4607
Washer Thrust Bearing
01-244-4608
Washer Thrust Bearing
7.0000" outside diameter round
01-244-4734
Bearing Replacement Me Parts Kit
01-244-5056
Sleeve Bushing
01-244-5057
Sleeve Bushing
01-244-5058
Sleeve Bushing
01-244-5293
Sleeve Bushing
1.6000" overall length repair for retract arm, mlg, c-5a cadmium surface treated 17c solid, plain, no outside flanges
01-244-5294
Plain Self-aligning Bearing
1.4995" bore diameter with insert and/or liner with staking groove
01-244-5871
Sleeve Bearing
01-244-5922
Sleeve Bearing Half Set
01-244-5979
Sleeve Bearing
01-244-5980
Sleeve Bushing
01-244-5981
Sleeve Bushing
0.2700" overall length cadmium surface treated 17c solid, plain, no outside flanges
01-244-5983
Washer Thrust Bearing
23.7500" outside diameter segmented along vert cl; top half flat 11.125 in. from horiz cl, bottom half flat 9.625 in. from horiz cl; third peripheralflat 12.000 in. r-h of vert cl w/one 1.250 in. r notch centered on horiz cl; sixteen equally spaced radial grease grooves in left bearing face, 0.250 in. w by 0.125 in. dp; sixteen longitudinal grease groove around left face inside corner, 0.250 in. w by 0.125 in. dp; six 0.656 in. dia countersunk through holes in left bearing face, unequally spaced on 21.500 in. dia blt circle round w/two flats
01-244-6423
Plain Rod End Bearing
Used on black hawk uh-60 airframe.
01-244-6953
Sleeve Bearing
0.2500" first hole diameter 3.6250" overall length inside dia flange end, counterbore, 2.6870 in. min, 2.6920 in. max dia, 0.5000 in. deep
01-244-6954
Sleeve Bushing
0.2950" overall length cadmium surface treated 17c solid, plain, no outside flanges
01-244-7456
Sleeve Bushing
01-244-7622
Washer Thrust Bearing
0.7550" outside diameter passivate surface treated round
01-244-7720
Bearing Replacement Me Parts Kit
01-244-7939
Sleeve Bushing
01-244-7940
Sleeve Bushing
01-244-7942
Washer Thrust Bearing
01-244-7973
Sleeve Bearing
01-244-7974
Sleeve Bushing
01-244-7976
Sleeve Bushing
2.0310" overall length cadmium surface treated 17c solid, plain, no outside flanges
01-244-7977
Sleeve Bushing
1.7810" overall length cadmium surface treated 17c solid, plain, no outside flanges
01-244-7978
Sleeve Bushing
0.8500" overall length 17c solid, plain, no outside flanges
01-244-7979
Sleeve Bushing
1.1920" overall length chromium outside diameter surface of body surface treated 17c solid, plain, no outside flanges
01-244-8729
Sleeve Bearing
01-244-8731
Sleeve Bushing
01-244-8732
Sleeve Bushing
0.4058" overall length optional groove left flange body corner, 0.062 in. max w; 0.005 in. max deep 22c solid, external flange one end
01-244-8773
Sleeve Bearing Set
01-244-8775
Sleeve Bearing Half
Used on MRAP.
01-244-9034
Sleeve Bushing
01-244-9050
Sleeve Bushing
5.1250" overall length 17c-3 solid, plain, no outside flanges, internal flange at both ends
01-244-9051
Sleeve Bushing
0.1356" overall length cadmium surface treated 17c solid, plain, no outside flanges
01-244-9054
Plain Rod End Bearing
01-244-9055
Washer Thrust Bearing
1.1200" outside diameter round
