01-234-1074
Sleeve Bushing
3.3000" overall length drill or ream id of body to 0.375; nha 4920011180481; used on f-15 acft; coolant hole 22c solid, external flange one end
01-234-1075
Sleeve Bushing
1.6000" overall length diameter of body 0.468-470 shapedlike half sleeve 1.29-1.31 in long; used on 2022125-1 for b-1b 21c solid, external flange
01-234-1471
Sleeve Bearing
0.3750" first hole diameter 2.9940" overall length 22c solid, external flange one end
01-234-1472
Sleeve Bushing
01-234-1474
Sleeve Bushing
3.0000" overall length to be secured in position by two 5/16 in. 18 nc grub screws located on bushing od at 180 degrees apart 17c solid, plain, no outside flanges
01-234-1475
Plain Rod End Bearing
3a thread class right-hand 2.4400" overall length 0.2495" bore diameter 24 thread quantity per inch passivate inner member surface treated ball type unf thread series
01-234-1476
Plain Rod End Bearing
3b thread class right-hand 2.5750" overall length 0.4370" bore diameter 20 thread quantity per inch cadmium rod end body surface treated ball type unjf thread series
01-234-1704
Sleeve Bushing
01-234-1973
Sleeve Bushing
01-234-2192
Sleeve Bushing
0.1380" overall length 22c solid, external flange one end
01-234-2511
Sleeve Bearing
01-234-2512
Sleeve Bushing
01-234-2663
Sleeve Bushing
17c solid, plain, no outside flanges
01-234-2665
Sleeve Bushing
0.5400" overall length od counterbore left end 0.687 in. min, 0.689 in. max, 0.290 in. min, 0.300 in. max deep, 2 bevels equally spaced; id counterbore left end 0.387 in. min, 0.392 in. max, 0.250 in. min, 0.260 in. max deep
01-234-2676
Washer Thrust Bearing
1.7500" outside diameter round
01-234-2780
Sleeve Bushing
01-234-3165
Sleeve Bearing
01-234-3166
Sleeve Bearing
4.5000" overall length
01-234-3167
Sleeve Bearing
01-234-3168
Sleeve Bushing
17c solid, plain, no outside flanges
01-234-3169
Sleeve Bushing
01-234-3840
Sleeve Bearing
17c solid, plain, no outside flanges
01-234-3841
Sleeve Bearing
01-234-3842
Sleeve Bearing
01-234-3843
Sleeve Bushing
01-234-3844
Sleeve Bushing
01-234-3845
Sleeve Bushing
0.6150" overall length 17c solid, plain, no outside flanges
01-234-3846
Sleeve Bushing
0.2860" overall length 17c solid, plain, no outside flanges
01-234-3850
Washer Thrust Bearing
01-234-4455
Sleeve Bushing
Used on mhu-196/204/m.
01-234-5255
Sleeve Bearing
0.1250" first hole diameter 0.7500" overall length 17c solid, plain, no outside flanges
01-234-5256
Sleeve Bushing
01-234-5257
Sleeve Bushing
01-234-6293
Washer Thrust Bearing
01-234-6422
Sleeve Bearing
0.2975" overall length liner bonded to face of flange anodize outside diameter surface of body or chromate outside diameter surface of body surface treated 22c solid, external flange one end
01-234-6423
Sleeve Bearing
0.2975" overall length liner bonded to face of flange anodize outside diameter surface of body or chromate outside diameter surface of body surface treated 22c solid, external flange one end
01-234-6424
Sleeve Bushing
01-234-6426
Sleeve Bushing
0.3750" overall length 17c solid, plain, no outside flanges
01-234-6427
Sleeve Bushing
0.7500" first hole diameter 11.7500" overall length 17d half sleeve, plain, no outside flanges
01-234-6428
Sleeve Bushing
01-234-6926
Sleeve Bushing
01-234-7536
Sleeve Bushing
01-234-7666
Sleeve Bearing
48.0000" overall length 17a split, plain, no outside flanges
01-234-7667
Sleeve Bushing
0.6300" overall length bore square 0.2000 in. min 0.2060 in. max width cadmium surface treated 22c solid, external flange one end
01-234-7668
Sleeve Bushing
01-234-7669
Sleeve Bushing
01-234-7670
Sleeve Bushing
01-234-7672
Sleeve Bushing
0.2690" overall length cadmium surface treated 22c solid, external flange one end
01-234-7673
Sleeve Bushing
0.2280" first hole diameter 0.6690" overall length cbore in id, flange face, 1.450 in. dia min to 1.465 in. dia max, 0.045 in. dp; holes centered 0.265 in. from right corner passivate surface treated 22c solid, external flange one end
01-234-7676
Washer Thrust Bearing
1.9900" outside diameter round
