01-188-9349
Ball Annular Bearing
01-188-9351
Ball Annular Bearing
01-188-9354
Ball Annular Bearing
01-188-9355
Tapered Roller Bearing Cone
01-188-9356
Tapered Roller Bearing Cup
01-188-9683
Ball Annular Bearing
0.3887" overall width 0.4724" bore diameter non-loading groove, non-separable
01-188-9684
Bearing Ball
Ball
01-188-9732
Retaining Bearing Plate
7.3745" outside diameter unc thread series
01-188-9733
Retaining Bearing Plate
3.625" outside diameter passivate surface treated
01-189-1132
Ball Bearing Retainer
01-189-1358
Roller Cylindrical Bearing
Used on acft eng f-110. 0.9140" overall width 0.3050" bore diameter inner ring is extended, 1.5350 in.min-1.5450 in. max dia; bearing to be non-separable but end washers will be loose on inner ring 260b double row, non-locating, cylindrical inner ring, cylindrical outer ring with two roller retainment rings on outer, separable
01-189-1457
Ball Duplex Bearing
Used on air force f108 engine fleet. fixed match bearing set to be kept segregated from oem approved parts so that they cannot be used on any fleet but af F108 engine fleet
01-189-1458
Ball Duplex Bearing
Used on aircxraft engine f-108. pressurized drive bearing to be kept segregated from oem approved parts so they cannot be used on any engine except f-108 engine
01-189-1459
Ball Duplex Bearing
Used on aircraft engine f-108. pressurized driven bearing to be kept segregated from oem approved parts so they cannot be used on any engine except f-108 engine fleet
01-189-1968
Roller Tapered Bearing
01-189-2559
Ball Annular Bearing
Used on b-1b pacer bee. 0.1960" overall width 0.1875" bore diameter non-loading groove, non-separable
01-189-2803
Roller Cylindrical Bearing
Used on nha p/n 708000/4061651. critical form fit function
01-189-3151
Ball Annular Bearing
Used on air route surveillance radar 3,arsr3.
01-189-3582
Ball Annular Bearing
01-189-3883
Retaining Bearing Plate
01-189-4052
Fan And Water Pump Bearing
01-189-4095
Ball Thrust Bearing
Used on c-141a/b,c-5a,e-3a acft.
01-189-4096
Roller Thrust Bearing
Used on f-15 acft.
01-189-4596
Roller Tapered Bearing
1.0000" overall width 2.8750" bore diameter straight bore, normal angle
01-189-4820
Ball Annular Bearing
2 ea; used on whirlpool bath models HM200, 6530-01-128-2442
01-189-6440
Roller Thrust Bearing
Used on 2350-01-087-1095. 0.1340" overall width roller, radial
01-189-6978
Ball Annular Bearing
Used on ah-64 airframe, rotary wing aircraft.
01-189-7564
Ball Annular Bearing
10.0mm overall width 17.0mm bore diameter double holding wires on each outside corners of outer ring, steel 17-4ph; bearings to be demagnetized, residual field strength not to exceed 5.0 gauss silver retainer surface treated 40c 4 point ball contact, split outer ring, spearable
01-189-7565
Ball Annular Bearing
0.3438" overall width 0.6247" bore diameter ball, inner ring, and outer ring to be hardened to rhc 60 min non-separable
01-189-7566
Roller Tapered Bearing
01-189-7567
Ball Rod End Bearing
3a thread class right-hand 1.7660" overall length 0.1897" bore diameter 24 thread quantity per inch keyway in shank cadmium exposed surfaces as mounted surface treated double row, staggered, ball unf thread series
01-189-9278
Ball Annular Bearing
Used on kc135r acft. width 0.230 in., dia. 0.940 in., base 0.470 in.; used on pneumatic actuator, f-108 eng
01-189-9279
Ball Annular Bearing
Used on kc135r acft. used on a pneumatic actuator; width is 0.310 in., dia. is 1.100 in., base is 0.470 in.
01-189-9980
Retaining Bearing Plate
01-190-0165
Ball Bearing Retainer
01-190-1680
Ball Annular Bearing
01-190-1682
Ball Annular Bearing
01-190-1684
Ball Annular Bearing
01-190-1685
Ball Annular Bearing
01-190-1686
Ball Annular Bearing
01-190-1687
Ball Annular Bearing
01-190-1688
Roller Tapered Bearing
01-190-2031
Ball Annular Bearing
01-190-2145
Retaining Bearing Plate
