00-620-2816
Ball Annular Bearing
12.00mm overall width 20.00mm bore diameter retainer to be inner land riding; suitable for operation at 250 deg f; part no. marked on face of race in accordance w/sikorsky spec ss-8770; all external corners rounded 0.0240 in. max non-loading groove, non-separable
00-620-2817
Ball Annular Bearing
10.00mm overall width 17.00mm bore diameter inner land riding retainer non-loading groove, non-separable
00-620-2819
Ball Annular Bearing
8.0mm overall width 12.00mm bore diameter suitable for operation at 250 deg f, all extern al corners rounded 0.0240 in. max non-loading groove, non-separable
00-620-2820
Ball Annular Bearing
9.00mm overall width 30.00mm bore diameter surface roughness not to exceed 25 uin aa for retainer contact surfacesof inner race, retainer to be inner land riding non-loading groove, non-separable
00-620-2821
Ball Annular Bearing
0.5000" overall width 1.2500" bore diameter part no. marked on face of either race in accordance w/sikorsky spec SS8770 non-loading groove, non-separable
00-620-2822
Ball Annular Bearing
0.3750" overall width 0.9996" bore diameter suitable for operation at 250 degf, all external corners rounded 0.0550 in. max to clear 0.0300 radius non-loading groove, non-separable
00-620-2825
Ball Annular Bearing
0.1960" overall width 15.0mm bore diameter 1/3 full with specified grease selected, classified non-loading groove, non-separable
00-620-2838
Roller Needle Bearing
0.6243" bore diameter oil hole chromate outer ring outside diameter surface treated cam roller, hardened
00-620-2839
Ball Annular Bearing
0.4060" overall width 8.00mm bore diameter special noise tested brg non-loading groove, non-separable
00-620-2948
Ball Annular Bearing
0.2500" bore diameter non-loading groove, non-separable
00-620-3251
Tapered Roller Cone And Rollers
2.2500" bore diameter normal angle
00-620-3259
Ball Annular Bearing
0.0625" overall width 0.0469" bore diameter non-loading groove, non-separable
00-620-3261
Roller Needle Bearing
0.3750" bore diameter oil hole cadmium all external/exposed metal surfaces surface treated cam roller, hardened
00-620-3262
Roller Airframe Bearing
0.5000" bore diameter 10 deg self alignment in either direction, lubricant hole cadmium all external/exposed metal surfaces surface treated concave rollers, double closure, self aligning
00-620-3263
Roller Airframe Bearing
0.6250" bore diameter 10 deg self-alignment in either direction; lubricant hole cadmium all external/exposed metal surfaces surface treated concave rollers, double closure, self aligning
00-620-3730
Ball Annular Bearing
0.1970" overall width 0.1880" bore diameter selected, classified
00-620-3818
Bearing Roller
1.3550" overall length phosphate surface treated cylindrical roller, spherical ends
00-620-4110
Ball Annular Bearing
0.0781" overall width 0.0550" bore diameter non-loading groove, non-separable
00-620-4399
Bearing Roller
7.0mm overall length cylindrical roller, flat ends
00-620-4498
Roller Needle Bearing
0.3750" overall width 0.5000" bore diameter non-separable, open end, drawn shell
00-620-4913
Ball Annular Bearing
0.1562" overall width 0.1250" bore diameter torque tested for very low torque requirements non-loading groove, non-separable
00-620-4914
Ball Annular Bearing
0.1970" overall width 0.1875" bore diameter torque tested for very low torque requirements non-loading groove, non-separable
00-620-4919
Ball Thrust Bearing
One washer w/retainer flat race surface, in line ball retainer
00-620-5449
Roller Tapered Bearing
4.3125" overall width 3.0000" bore diameter hole straight bore, double cup, single cones, steep angle
00-620-5453
Ball Stack Bearing
1.8596" overall width 2.3610" bore diameter part no. stack
00-620-6177
Roller Cylindrical Bearing
7.0mm overall width 13.0mm bore diameter 250c single row, non-locating, cylindrical inner ring, cylindrical outer ring with two roller retainment rings on outer, separable
00-620-6571
Ball Annular Bearing
0.1562" overall width 0.1250" bore diameter bearings suitable for operation at 392.0 deg fahrenheit; selected, classified non-loading groove, non-separable
00-620-6573
Ball Annular Bearing
9.0mm overall width 15.00mm bore diameter non-loading groove, non-separable
00-620-6574
Ball Annular Bearing
12.0mm overall width 25.00mm bore diameter non-loading groove, non-separable
00-620-6783
Ball Annular Bearing
0.1094" overall width 0.1250" bore diameter non-loading groove, non-separable
00-620-6784
Ball Thrust Bearing
Grooved race surface
00-620-6984
Bearing Outer Ring
0.2620" overall width 3.4450" bore diameter outer ring, roller, cylindrical
00-620-8103
Ball Fairlead Bearing
0.2500" bore diameter afbma tolerance of abec 5, radial end play 0.0010 in. max, 45 deg grove located 0.1092 in. on width dim, double row ball brg
00-620-8105
Bearing Ball
Metallic hardness rating rockwellc nom 60.0 in.
00-621-1583
Ball Annular Bearing
0.3750" bore diameter inner ring extended flange side only nickel inner ring surface treated non-loading groove, non-separable
00-621-1982
Ball Annular Bearing
0.3105" bore diameter inner or outer ring composed of 2 or more parts non-loading groove, non-separable
00-621-2926
Bearing Retainer And Balls
0.6250" outside diameter 0.3125" bore diameter retainer
00-621-5239
Roller Thrust Bearing
0.7580" bore diameter oil hole in band also 1/32 in. by 45 deg bore radius tapered rollers, banded od
00-621-5240
Ball Airframe Bearing
2.3115" bore diameter cadmium all external/exposed metal surfaces surface treated single row inner ring extended both sides
00-621-5243
Roller Needle Bearing
3.0000" bore diameter oil hole cadmium all external/exposed metal surfaces surface treated airframe, hardened
00-622-0865
Bearing Ball
Ball
00-622-4579
Roller Cylindrical Bearing
00-622-7169
Retaining Bearing Plate
3.7500" outside diameter color white enamel surface treated round
00-623-1019
Roller Self-aligning Bearing
53.0mm overall width 140.0mm bore diameter lubrication groove double row, spherical rollers, self-contained, outer
00-623-1970
Retaining Bearing Plate
00-623-1973
Roller Cylindrical Bearing
00-623-1980
Roller Cylindrical Bearing
00-623-2174
Ball Annular Bearing
0.2250" overall width 0.1250" bore diameter flange corners chamfered 0.0300 in. by 55 deg on front face, vibration tested non-loading groove, non-separable
00-623-3879
Ball Annular Bearing
