00-157-1915
Ball Annular Bearing
21.0mm overall width 35.00mm bore diameter automotive type snap ring loading groove, non-separable
00-157-1920
Ball Annular Bearing
00-157-1930
Ball Annular Bearing
00-157-1931
Ball Annular Bearing
0.1562" overall width 0.1250" bore diameter non-loading groove, non-separable
00-157-1940
Ball Annular Bearing
0.1562" overall width 0.1875" bore diameter non-loading groove, non-separable
00-157-1942
Ball Annular Bearing
0.2187" overall width 0.2500" bore diameter non-loading groove, non-separable
00-157-1953
Ball Annular Bearing
0.2187" overall width 0.3750" bore diameter selected non-loading groove, non-separable
00-157-1956
Ball Annular Bearing
0.2500" overall width 0.5000" bore diameter non-loading groove, non-separable
00-157-1960
Ball Annular Bearing
0.3125" overall width 0.7500" bore diameter selected non-loading groove, non-separable
00-157-1962
Ball Annular Bearing
0.3750" overall width 1.0000" bore diameter non-loading groove, non-separable
00-157-1963
Ball Annular Bearing
0.3750" overall width 1.1250" bore diameter non-loading groove, non-separable
00-157-1969
Ball Annular Bearing
0.1875" bore diameter non-loading groove, non-separable
00-157-1971
Ball Annular Bearing
0.3075" overall width 2.2494" bore diameter internal clearance measured under 5.5 lb load, corner radii 0.0150 in. non-loading groove, non-separable
00-157-1972
Ball Annular Bearing
0.3075" overall width 0.3740" bore diameter corner radii 0.0150 in. non-loading groove, non-separable
00-157-1973
Ball Annular Bearing
0.3075" overall width 0.3740" bore diameter corner radii 0.0150 in. non-loading groove, non-separable
00-157-1977
Ball Annular Bearing
0.1875" bore diameter eccentricity of inner ring 0.0004 in. max, outer ring 0.0005 in. max w/ snap wire on inner ring; brg must have smooth running qualities non-loading groove, non-separable
00-157-1983
Ball Annular Bearing
0.3125" overall width 2.2500" bore diameter non-loading groove, non-separable
00-157-2007
Ball Annular Bearing
1.8744" bore diameter banded od, face of outer ring forms lip which extends down beyond face of inner ring clutch release
00-157-2009
Ball Annular Bearing
2.1345" bore diameter banded od, band extends beyond width of rings, one face of outer ring forms lip which extends down beyond face of inner ring clutch release
00-157-2010
Ball Annular Bearing
2.2494" bore diameter banded, band extends beyond width of rings, one face of outer ring forms lip which extends down to meet shoulder on od of inner ring clutch release
00-157-2021
Ball Annular Bearing
0.4270" overall width 3.3280" bore diameter counterbored outer ring, non-separable
00-157-2025
Ball Annular Bearing
0.3150" bore diameter pull on one side of inner ring, bore corner on puller side is broken, all other corner radii 0.0200 26c counterbored outer ring, non-separable
00-157-2026
Ball Annular Bearing
1.1024" overall width 4.1339" bore diameter non-loading groove, non-separable
00-157-2028
Ball Annular Bearing
3.2982" bore diameter inner ring 26c counterbored outer ring, non-separable
00-157-2037
Ball Annular Bearing
20.00mm overall width 50.00mm bore diameter bore counterbored outer ring, non-separable
00-157-2046
Ball Annular Bearing
5.0mm overall width 5.00mm bore diameter torque tested, raceways have extra smooth finish counterbored outer ring, magneto type, s eparable
00-157-2050
Ball Annular Bearing
8.0mm overall width 15.00mm bore diameter inner counterbored outer ring, magneto type, s eparable
00-157-2070
Ball Duplex Bearing
30.0mm overall width 20.00mm bore diameter 92c counterbored outer rings, non-separable, face to face mounting
00-157-2071
Ball Duplex Bearing
50.0mm overall width 45.00mm bore diameter 92c counterbored outer rings, non-separable, face to face mounting
00-157-2082
Ball Duplex Bearing
66.0mm overall width 130.00mm bore diameter 92b counterbored outer rings, non-separable, back to back mounting
00-157-2083
Ball Thrust Bearing
0.1000 in. radius by 0.0400 in. deep on outside of one ring bore, 0.8750 in. bore on other ring grooved race surface, banded od
00-157-2091
Ball Annular Bearing
16.0mm overall width 30.00mm bore diameter counterbored outer ring, non-separable
00-157-2094
Ball Duplex Bearing
30.0mm overall width 20.00mm bore diameter 92b counterbored outer rings, non-separable, back to back mounting
00-157-2100
Ball Duplex Bearing
62.0mm overall width 60.00mm bore diameter 92b counterbored outer rings, non-separable, back to back mounting
00-157-3301
Bearing Inner Ring
1.2400" overall width 22.5050" bore diameter inner ring, roller, cylindrical
00-157-3302
Bearing Outer Ring
1.2400" overall width 30.7500" bore diameter outer ring, roller, cylindrical
00-157-3726
Ball Thrust Bearing
Bronze ferrule on id of one washer, washers overlap clutch release, thrust, lubricated
00-157-3727
Ball Thrust Bearing
Overlaping washers clutch release, thrust, lubricated
00-157-3731
Ball Thrust Bearing
Od banded, bore dia equivalent to washer dia of 0.5230 in. min, 0.5270 in. max
00-157-3740
Ball Thrust Bearing
Grooved race surface, banded od
00-157-3747
Ball Thrust Bearing
Banded od
00-157-3748
Ball Thrust Bearing
Banded od
00-157-6029
Ball Annular Bearing
55.00mm bore diameter non-loading groove, non-separable
00-157-6045
Ball Annular Bearing
1.3380" overall width 0.7150" bore diameter inner ring counterbored to a width of 0.5469 in., balance of inner ring 0.7500 in., broached for 0.6875 in. hex shaft, spun 0uter casing extends 0.3437 in. on one side non-loading groove, non-separable
00-157-6052
Ball Annular Bearing
0.2656" bore diameter inner or outer ring composed of two or more parts, furnished with screw
00-157-6060
Ball Annular Bearing
0.3750" bore diameter inner or outer ring composed of two or more parts split outer ring with flanged band, solid inner ring extended on flange side, non-separable
00-157-6069
Ball Annular Bearing
0.2500" bore diameter od tapered, side opposite shield is modified for additional shield
00-157-6070
Ball Annular Bearing
Outer ring has wide face on one side that butts directly against clutch throwout arm
00-157-6080
Ball Annular Bearing
36.0mm overall width 45.00mm bore diameter non-loading groove, non-separable
00-157-6081
Ball Annular Bearing
1.4911" overall width 1.7712" bore diameter non-loading groove, non-separable
