01-281-8705
Rigid Connecting Link
Used on pacer special.
01-281-8706
Rigid Connecting Link
Used on pacer special.
01-281-8707
Rigid Connecting Link
Used on used as support-forward engine mount for the f-16c/d blk 40/60.
01-281-9409
Actuating Line Cylinder Assembly
01-281-9410
Actuating Line Cylinder Assembly
01-281-9411
Actuating Line Cylinder Assembly
01-281-9412
Actuating Line Cylinder Assembly
01-281-9415
Multiple Disk Brake
4.876" overall width
01-281-9526
Shouldered Shaft
01-281-9586
Actuating Linear Cylinder
Used on ENGINE.
01-281-9705
Straight Shaft
01-281-9706
Straight Shaft
8.560" overall length
01-281-9707
Straight Shaft
Used on 1730-01-227-8152. 17.060" overall length
01-281-9708
Linear Actuating Cylin Parts Kit
Used on 3810-01-205-2716.
01-281-9711
Counterbalance Weight
Cast iron; 2200 lbs; 13.250 in. o/a h; 21.370 in. o/a w; 44.000 in. o/a lg
01-281-9721
Remote Control Lever
Used on 2420-00-567-0135. vertical offset, one hole link end, clamp type shaft end
01-281-9722
Rigid Connecting Link
Used on 2330-01-224-9244. 23.380" overall length
01-281-9788
Manual Control Lever
01-282-0151
Shouldered Shaft
Used on 1010-01-233-9493. 7.000" overall length
01-282-0186
Ball Joint
Used on 4320-01-190-0417.
01-282-0187
Remote Control Lever
Used on 1730-01-227-8152. 0.380" overall width
01-282-0188
Rigid Connecting Link
Used on main steam turbine.
01-282-0296
Control Cam
Used on f-16c/d aircraft. aircraft hydraulic, vacuum, deicingsystems
01-282-1004
Shouldered Shaft
Used on part of leveling jack for shelters-332/tswt,atc central an/tswt.
01-282-1025
Mechanical Drive Housing
Used on the leveling jack for shelter s-332/tsw-7 atc central an/TSW7
01-282-1098
Eye Nonrotating Shaft Bracket
Used on f-16c/d blk 40/60. 2.039" overall length 3 bolt hole quantity shaft hole is splined with 30 teeth, pressure angle is 30 deg., shaft hole is in center of tri shaped bracket
01-282-1358
Shouldered Shaft
01-282-1494
Shouldered Shaft
01-282-1495
Shouldered Shaft
01-282-1496
Shouldered Shaft
01-282-1638
Multiple Disk Brake
1.597" overall width
01-282-1673
Spur Gearshaft
01-282-1737
Hub Clamp
1.880" overall length 1.880" overall width 0.6250" bore diameter two securing bolts cadmium surface treated rectangular, single bolt secured
01-282-1738
Shouldered Shaft
01-282-1739
Shouldered Shaft
01-282-1741
Linear Actuating Cylin Parts Kit
01-282-1745
Fluid Transmission Cooler
01-282-1780
Actuating Line Cylinder Assembly
2.500" overall width 2.000" bore diameter
01-282-1785
Eye Rotating Shaft Bracket
Used on 3810-01-205-2716. 10.000" overall length 2 bolt holes; bore centerline to base bottom is 1.250in.; center to center between bolt holes is 1.250in.
01-282-2015
Manual Control Lever
01-282-2503
Shouldered Shaft
12.625" overall length
01-282-2504
Straight Shaft
4.812" overall length woodruff keyway located on second end, 2.125 in. from keyway center to end; hole on second end is 82 deg countersunk to 0.375 in.dia
01-282-2506
Straight Shaft
27.203" overall length
01-282-2530
Control Cam
Used on ingersoll-rand air hoist model hra20a.
01-282-2623
Shouldered Shaft
