01-254-9588
Remote Control Lever
Used on recovery veh ft m88a1. 0.325" thread length 0.500" bore diameter offset height: 0.2815 in. enamel surface treated clevis link end, securing hole (s) shaft end
01-254-9661
Shouldered Shaft
Used on pump unit centrifugal. 4.000" overall length second end has a 5/8 in. bore 1-3/4" deep drilled in end of shaftto accomodate coupling to motor
01-254-9819
Rigid Connecting Link
47.709" overall length effective length: 45.690"; end attachment info: height 0.938 inch 1st end, 2nd end four pivot holes anodize surface treated
01-254-9831
Mechanical Drive Housing
Used on tractor, whl ind, dsl w/backhoe/ loader/ hyd tool d7f.
01-254-9892
Straight Shaft
18.380" overall length 4th flat groove, 4.000 in. center to center from 3rd flat groove; 2nd cross drilled hole 2.692 in. from center of hole to 1st end, 0.250 in. dia
01-254-9893
Straight Shaft
01-254-9895
Shouldered Shaft
01-254-9896
Shouldered Shaft
01-254-9916
Manual Control Lever
Used on j.i. case model m4k lift truck. with attachment holes; right hand
01-254-9917
Accumulator Cap
01-254-9931
Body Hub
Securing hole qty:3
01-254-9933
Rigid Connecting Link
2.500" overall length
01-255-0950
Eye Rotating Shaft Bracket
0.250" overall length
01-255-0951
Bell Crank
Used on 2350-00-122-6826. flat, one or more holes both arms
01-255-0954
Remote Control Lever
01-255-0955
Straight Shaft
Used on nsn 2350-00-122-6820 recovery vehft. 25.375" overall length
01-255-0956
Straight Shaft
7.920" overall length
01-255-0960
Shouldered Shaft
01-255-0961
Shouldered Shaft
01-255-0962
Shouldered Shaft
01-255-1383
Control Cam
Used on forward infra-red image finder for the combat talon ii. matlcres rod, type 303, cond a per qq-s-764; 0.250 in. lg; 0.1250 in. dia shaft hole; two setscrew holes 0.070 in.dia 90 deg csk x.09 dia .086-56 unc-2bthur one wall
01-255-1394
Manual Control Lever
01-255-1597
Hydraulic Accumulator
01-255-1605
Bell Crank
Consists of three items welded per mil-std-1261 class 1 raised faced holes, offset arm
01-255-1607
Remote Control Lever
01-255-1608
Remote Control Lever
01-255-1611
Remote Control Lever
Used on 2420-00-567-0135.
01-255-1612
Pawl
Used on 2420-00-567-0135. length from pivot pinhole centerline to point of engagement:0.819 in.nom
01-255-1613
Rigid Connecting Link
Used on 2420-00-567-0135. 3.150" overall length
01-255-1614
Rigid Connecting Link
Used on 2420-00-567-0135.
01-255-1615
Rigid Connecting Link
12.219" overall length
01-255-1685
Extension Shaft
Eod tools/equipment
01-255-1786
Mechanical Drive Housing
Used on arleigh burke, class ddg.
01-255-1953
Shouldered Shaft
63.550" overall length
01-255-1954
Shouldered Shaft
01-255-2113
Rigid Connecting Link
01-255-2219
Control Cam
Rc 26-32 416 stn, passivate per bic spec 95015
01-255-2220
Control Cam
Rc 26-32 416 stn., passivate per bic spec 95015
01-255-2306
Shouldered Shaft
Used on b1-b ose41a01. 20.062" overall length has another hole 4.438 in. from second end; 0.250 in. dia; 0.156 in. deep; also has keyway on second end
01-255-2341
Spur Gearshaft
Used on b-1b acft.
01-255-2383
Bell Crank
Used on b-1b acft.
01-255-2916
Shouldered Shaft
Used on chrysler light duty truck 1986-87. 18.540" overall length
