00-076-3667
Spur Gearshaft
00-076-4764
Flexible Shaft Assembly Core
3a thread class 0.920" thread length 39.770" overall length cable dia 0.186 to 0.188 dia
00-076-4833
Spur Gearshaft
00-076-4909
Rigid Connecting Link
00-076-5123
Shouldered Shaft
0.8450" overall length
00-076-5139
Straight Shaft
0.840" overall length not casehardened; shaft ends chamfered 0.010 deep at 45.0 deg angle; surface passivated
00-076-5724
Straight Shaft
Used on rt-332/arc-52. 4.562" overall length
00-076-6384
Control Cam
Passivate surface treated
00-076-7136
Shouldered Shaft
1.343" overall length
00-076-7150
Shouldered Shaft
2.156" overall length largest dia 20 sae stantard external splines located 0.515 in. from first end
00-076-7155
Detent Plate
Used on radar set.
00-076-7199
Control Cam
Steel per mil-s-18729; 0.190 in. thk
00-076-7207
Rigid Connecting Link
17.770" overall length
00-076-7210
Rigid Connecting Link
00-076-8670
Actuating Line Cylinder Assembly
1.500" bore diameter
00-076-9050
Remote Control Lever
00-076-9110
Friction Lining
00-076-9111
Friction Lining
00-076-9112
Friction Lining
00-076-9113
Friction Lining
00-076-9146
Shouldered Shaft
10.625" overall length three 0.312-18 unc thd holes thru shaft vertical to axis
00-076-9161
Spur Gearshaft
00-077-1092
Rigid Connecting Link
00-077-1093
Rigid Connecting Link
00-077-1240
Shouldered Shaft
6.500" overall length
00-077-1241
Helical Gearshaft
4.750" overall length
00-077-1245
Straight Shaft
2.812" overall length second end has additional flat, identical to first flat, 90 degrees apart
00-077-1705
Linear Actuating Cylin Parts Kit
Used on model fp60-24ps.
00-077-1706
Linear Actuating Cylin Parts Kit
Used on model fp60-24ps.
00-077-1873
Control Cam
Used on acft eng,fuel control. 1.420 in. lg
00-077-1966
Counterbalance Weight
Sintered tungsten alloy, mil-t-21014, type i or type ii; o/a dim. lg 0.984 in. to 1.016 in., w 0.484 in. to 0.516 in., thk 0.187 in.; 1 hole, 0.125 in.dia thru-82 degrees countersink to 0.218 in. dia on the contour side of radius 2.234 in. to 2.266 in., counterbore 0.234 to 0.266 in. dia to a dp 0.060 in. on convex side, convex edge chamfered to 18 deg 30 min
00-077-1967
Counterbalance Weight
Cognizant service: usn
00-077-1968
Counterbalance Weight
Used on 6115-00-994-2152. sintered tungsten alloy, mil-t-21014, type i or type ii; o/a dim. lg 0.984 in. to 1.016 in., w 0.422 in. to 0.453 in., thk 0.187 in.; 1 hole, 0.125 in. dia thru
00-077-1969
Counterbalance Weight
Cognizant service: usn
00-077-3053
Spur Gearshaft
4.160" overall length 0.500 in. bore dia., 0.750 in. bore lg; sprocket, carbon steel; fscm 19382
00-077-3237
Rigid Connecting Link
3.000" overall length
00-077-3269
Bell Crank
1.370" bore diameter
00-077-8434
Rigid Connecting Link
00-077-8554
Straight Shaft
1.740" overall length
00-077-8555
Straight Shaft
1.360" overall length
00-077-8556
Straight Shaft
1.610" overall length
00-077-8769
Manual Control Lever
Used on 47-631-240, h13h aircraft. 2.866" overall length 1.775" overall width lever-idler, throttle cam box
00-077-8778
Remote Control Lever
Used on throttle control assembly. 0.693" overall width 0.250" bore diameter 2 holes located on link end for 0.0937 in. rivet; offset height: 0.397 in.
00-078-0077
Straight Shaft
6.4400" overall length has third hole off center 0.6250" in diameter
00-078-0089
Straight Shaft
2.340" overall length
00-078-0478
Shouldered Shaft
Used on 4920-00-529-0452,stand maintenance.
00-078-0912
Shouldered Shaft
16.000" overall length
00-078-0960
Bell Crank
0.542" bore diameter raised face pivot
00-078-0964
Rigid Connecting Link
00-078-0983
Shouldered Shaft
6.308" overall length
