00-613-4196
Straight Shaft
00-613-4342
Rigid Connecting Link
00-613-4346
Shouldered Shaft
00-613-4351
Rigid Connecting Link
Effective length: 38.900; locknut included; surface treatment zinc chromate
00-613-5470
Straight Shaft
4.622" overall length
00-613-5474
Shaft Collar
Used on flr or wall mtg air conditioner, 4120-00-411-3730 cadmium surface treated
00-613-6053
Shaft Collar
1.125" outside diameter 0.6250" bore diameter plain round
00-613-6568
Inertia Damper
Rudder control, acft hyd; self contained, rotary type, 28.0 in. lb per radian per sectorque rate, 0.005 in. fluid thk, 0.5 in. lb max friction, dc 510 fluid 300000.0 centistokes at 25.0 deg c
00-613-6612
Bell Crank
Clevis ends
00-613-6613
Bell Crank
0.813" bore diameter raised faced holes, offset both arms
00-613-6793
Pawl
Used on pccn recovery v.
00-613-7130
Shouldered Shaft
15.843" overall length fourth step has 1.375-18 unef, 2a, 0.625 in.thd lg
00-613-7281
Spur Gearshaft
00-613-8146
Worm Shaft
Used on 101503229728. 4.248" overall length chemical surface treated
00-613-8170
Worm Shaft
Used on howitzer,105mm,m101/m101a1.
00-613-9096
Worm Shaft
0.290" second end, eighth portion thread length 6.410" overall length passivate surface treated
00-613-9107
Worm Shaft
0.312" second end, sixth portion thread length 5.125" overall length passivate surface treated
00-613-9110
Retaining Shaft Plate
Used on fire control designating and indicating equipment. 3.813" outside diameter mtg hole spacing:equally spaced on 3.156 in. dia bolt circle
00-613-9212
Rigid Connecting Link
00-613-9215
Rigid Connecting Link
00-613-9279
Rigid Connecting Link
00-613-9284
Worm Shaft
3.529" overall length passivate surface treated
00-614-0157
Pawl
Casehardened; surface finish:cadmium, qq-p-416, ty 2, cl 2
00-614-0952
Rigid Connecting Link
00-614-1106
Body Hub
O/a length:0.203 in.nom; fsc application data:radio passivate surface treated single hub w/ securing hole (s)
00-614-1441
Body Hub
Securing hole qty:8; angle between centerlines of securing holes in deg:45.0 degs; o/a length:1.250 in.nom; no.10 (0.190-32 in.nf-2b single hub w/ securing hole (s)
00-614-1624
Shouldered Shaft
00-614-2301
Push-pull Control Assembly
Push rod assembly of rubber stamp part numbers per bac 5307
00-614-2396
Rigid Connecting Link
00-614-3038
Straight Shaft
Used on c-123 aircraft. 3.313" overall length
00-614-3213
Body Hub
Securing hole qty:2; angle between centerlines of securing of securing holes in deg:90.0 degs; o/a length:0.370 in.min, 0.380 in.max; securing hole size:no.6 (0.138-32 in.nc-2b anodize surface treated single hub w/ securing hole (s)
00-614-4202
Rigid Connecting Link
Used on 1015-00-322-9728.
00-614-4614
Spur Gearshaft
00-614-4633
Shaft Collar
Used on 5840-00-505-0921,radar set,an/fps-6 and 5840-00-685-9046,radar set,an/fps-6a. 1.740" outside diameter 0.6600" bore diameter round stepped
00-614-4672
Shouldered Shaft
Used on 1015003229728 how m101. 3.500" overall length
00-614-5105
Rigid Connecting Link
18.270" overall length left end connector riveted in place, right end adjustable in lg by threaded insert; flush type lubricator fitting located 45 deg from centerline of @shank on both end connections
00-614-5110
Rigid Connecting Link
00-614-5224
Bevel Gearshaft
0.984" overall length
00-614-5230
Spur Gearshaft
00-614-6109
Rigid Connecting Link
00-614-6459
Helical Gearshaft
00-614-6949
Bell Crank
Clevis ends
00-614-6973
Bell Crank
Clevis ends
00-614-7045
Mechanical Drive Housing
Used on w/s truck utility, 1/4 ton, 4x4 (m151a 1/2). case assemblies fastened by 8 bolts
00-614-7057
Straight Shaft
25.500" overall length
00-614-7085
Remote Control Lever
Used on machine gun,cal. .50 (m2); nsn 1005-00-322-9715. 0.499" overall width 0.438" bore diameter heat treatment:heat at 1540 to 1580 degrees f; oil quench; temper for one hour phosphate surface treated flat, two holes link end, one hole second end
00-614-7196
Remote Control Lever
00-614-7204
Rigid Connecting Link
Effective length: 27.820"; locknut included
