01-505-6476
Actuating Line Cylinder Assembly
Used on scraper tractor hydraulics. 184.150mm bore diameter cylinder assembly cylinder is part of 8x-6562 control ar-hydraulic; part of the hydraulic system (6e-3690 cylinder gp-apron)
01-505-6617
Actuating Line Cylinder Assembly
01-505-6634
Hydraulic Accumulator Cylinder
01-505-6752
Shaft Collar
Used on caterpillar 428d, loader/backhoe. collar
01-505-6827
Straight Axle
01-505-6853
Straight Axle
Used on 428d loader/backhoe.
01-505-6870
Shouldered Axle
Used on 428d loader/backhoe.
01-505-6882
Shouldered Axle
Used on 428d loader/backhoe.
01-505-6895
Straight Axle
Used on 428d loader/backhoe.
01-505-6920
Straight Axle
Used on caterpillar 428d, loader, backhoe.
01-505-6930
Straight Axle
Used on caterpillar 428d, loader, backhoe.
01-505-6934
Straight Axle
Used on caterpillar 428d, loader, backhoe.
01-505-6936
Straight Axle
Used on caterpillar 428d, loader, backhoe.
01-505-6941
Straight Axle
Used on caterpillar 428d, loader, backhoe.
01-505-7220
Actuating Line Cylinder Assembly
10.495" overall width 6.000" bore diameter operation pressure 2190psi, zinc chramate primer, both ends adjustable, cylinder is 140 inchs long
01-505-7400
Actuating Line Cylinder Assembly
Used on 428d, louder/backhoe.
01-505-8138
Rigid Connecting Link
Used on wiper assembly heated.
01-505-8143
Rigid Connecting Link
Used on wiper assembly heated.
01-505-8145
Bell Crank
Used on power supply. bellcrank heat treat; item name on drwg is bellcrank assy, uplock, boarding ladder raised face pivot hole w/heel, clevis one end
01-505-8464
Rigid Connecting Link
Used on power supply. 5.500" overall length pin item name on drwg-pin, swivel, linkage, aft-boarding ladder; surface treatment is nickel
01-505-8747
Friction Lining Set
Trailer brake lining set set consists of replacement brake linings for one complete trailer axle. material is abex 931-162 with 23, 000lb rating.
01-505-8765
Rigid Connecting Link
Used on power supply. 5.500" overall length pin item name on drwg is pin, swivel, linkage, forward, boarding ladder; surface treatment is nickel
01-505-8794
Mechanical Nonaircraft Actuator
01-505-8963
Mechanical Drive Housing
Used on 428d, loader/backhoe.
01-505-8964
Shouldered Axle
Used on 428d, loader/backhoe.
01-505-8967
Shouldered Axle
Used on 428d, loader/backhoe.
01-505-8971
Shouldered Axle
Used on 428d, loader/backhoe.
01-505-8986
Straight Axle
Used on caterpillar 428d, loader/backhoe
01-505-9021
Actuating Line Cylinder Assembly
Used on caterpillar 428d, loader/backhoe
01-505-9123
Rigid Connecting Link
01-505-9124
Rigid Connecting Link
01-505-9244
Spline Adapter
01-505-9264
Worm Shaft
Used on seawolf class submarine ssn 23, external stbd tray handling winch cable drum level wind assembly. 36.125" overall length part name by controlling agency: screw, power rh. first end, eighth portion, two parallel flats 2.50 across. acme thread area 18.00 from first end has 1.88 hole drilled thur. note: referencing drawing 596-7410365-68 will show, screw power rh, p/n B434-8212-24. for correction to drawing refer to (er) engineering report ERMF02198 indicating drawing 596-7410365-68 is now, screw power lh, p/n B434-8212-22.
01-505-9346
Rigid Connecting Link
Used on family of medium and light tactical vehicles (fmtv); chassis, truck nsn 2320-01-353-9098. 301.0mm overall length rod, outside handle zinc surface treated
01-505-9348
Rigid Connecting Link
Used on family of medium and light tactical vehicles (fmtv); chassis, truck nsn 2320-01-353-9098. 287.0mm overall length rod, lock, lh zinc surface treated
01-505-9352
Rigid Connecting Link
Used on family of medium and light tactical vehicles (fmtv); chassis, truck nsn 2320-01-353-9098. 273.0mm overall length rod, inside, handle zinc surface treated
01-505-9354
Rigid Connecting Link
Used on family of medium and light tactical vehicles (fmtv); chassis, truck nsn 2320-01-353-9098. 90.0mm overall length rod, lock link zinc surface treated
01-505-9356
Rigid Connecting Link
Used on family of medium and light tactical vehicles (fmtv); chassis, truck nsn 2320-01-353-9098. 82.6mm overall length lock link, latch zinc surface treated
01-505-9359
Rigid Connecting Link
Used on family of medium and light tactical vehicles (fmtv); chassis, truck nsn 2320-01-353-9098. 287.0mm overall length rod, lock, rh zinc surface treated
01-505-9471
Shouldered Shaft
Used on f-15/f-16 aircrafts. 6.500" overall length shaft material is stainless steel-use mil spec 17-4; used on MC2000 test stand output shaft assembly; shaft has a 3/8" keyway at largest end; purpose of shaft is to mate constant speed drive & idg to the MC2000 generator test stand
01-505-9503
Actuating Line Cylinder Assembly
Used on seat assembly a310-222 airbus aircraft.
01-506-0153
Flexible Shaft Assembly
Used on miscelleneous part list for dd 0967. 350.375" overall length casing is not packed with asbestos
01-506-0236
Manual Control Lever
Used on caterpillar 428d loader/backhoe.
01-506-0401
Rigid Connecting Link
Used on virginia class submarine, ssn-774. 5.810" overall length indicator arm next higher assembly is the rdm final assembly, per westinghouse drawing 4D98024
01-506-0686
Straight Axle
Used on model 428d,loader/backhoe.
01-506-0687
Shouldered Axle
Used on model 428d,loader/backhoe.
01-506-0688
Shouldered Axle
Used on model 428d,loader/backhoe.
01-506-0689
Straight Axle
Used on model 428d,loader/backhoe.
01-506-0691
Straight Axle
Used on model 428d,loader/backhoe.
