00-234-5772
Rigid Connecting Link
1.750" overall length
00-234-5921
Push-pull Control Assembly
00-234-6597
Straight Shaft
5.125" overall length
00-234-6977
Rigid Connecting Link
11.809" overall length
00-234-7036
Single Disk Brake
5.875" overall width
00-234-7215
Shouldered Shaft
2.605" overall length
00-234-7317
Bell Crank
0.688" bore diameter 0.812 in. dia, 0.217 in. dp cbore
00-234-7397
Bell Crank
0.927" bore diameter 1.062 in. dia, 0.255 in. dp cbore anodize surface treated
00-234-7788
Control Cam
Aluminum alloy, qq-a-225/6, 1.500 in. od, 1.005 in. min, 1.010 max id, 0.620 in. thk
00-234-9403
Shouldered Shaft
Used on F-111.
00-234-9477
Straight Shaft
2.170" overall length end styles chamfered 0.010 deep w/ 45.0 deg angle; microinch finish 35.0 entire surface; surface passivated
00-234-9970
Shouldered Shaft
2.438" overall length
00-235-2190
Rigid Connecting Link
3.625" overall length
00-235-3553
Control Cam
Brass; 0.812 in. dia; 0.093 in. thk; 0.250 in. dia hole
00-235-3699
Shouldered Shaft
2.656" overall length
00-235-3771
Bell Crank
1.750" bore diameter two parallel holes, other arm ball end
00-235-4225
Rigid Connecting Link
1.500" overall length
00-235-4371
Eye Nonrotating Shaft Bracket
6.687" overall length 4 bolt hole quantity center to center distance between bolt holes: 5-7/16 in. between centers along length, 1-1/4 in. between centers along width
00-235-4445
Mechanical Drive Housing
Used on 2350-678-5773. approx 15-1/4 in. ht x 18-1/2 in. wd x 7/8 in. deep
00-235-4760
Remote Control Lever
2.000" overall width 1.376" bore diameter offset height: 0.590 in. phosphate surface treated flat, two hole link end
00-235-4770
Eye Rotating Shaft Bracket
3.828" overall length bolt hole:qty-4, shape-round, size-0.411 in. dia; c to c distance between bolt holes, 3.078 in., 2.250 in. on other ctr; distance from bore ctrline to base bottom, 2.940 in.
00-235-5662
Drive Flexible Shaft
2.940" overall length 0.150" outside diameter
00-235-6447
Manual Control Lever
00-235-7013
Spur Gearshaft
00-235-7014
Spur Gearshaft
00-235-7016
Shaft Collar
0.560" outside diameter 0.1401" bore diameter oxide surface treated plain round
00-235-7141
Rigid Connecting Link
This link is assembled from 1 tube, p/n 4F4328-103a, (1) end fitting, p/n 4F4328-113a, (1) end fitting, p/n 4F4328-115a, paint surface treated
00-235-7185
Rigid Connecting Link
1.620" overall length each end has 1 thru hole, 0.071 in.dia, centered 0.390 in.from end of link
00-236-0888
Spur Gearshaft
00-236-0915
Spur Gearshaft
00-236-2051
Spur Gearshaft
00-236-2489
Control Cam
W/ provision for mounting
00-236-2580
Manual Control Lever
Steel; painted red; 16.250 in. lg o/a; 2.250 in. w; 1.250 in. o/a h; with handle 0.891 in. od by 3.250 in. lg+ with two positioning holes in. 2nd end; 0.375 in. dia spaced 4 in. center to center; 90 deg movement angle of ever
00-236-2995
Rigid Connecting Link
18.125" overall length
00-236-3031
Rigid Connecting Link
2.125" overall length body tapers from 3/4 in. w to 1/2 in. w
00-236-4135
Straight Shaft
1.266" overall length
00-236-5096
Spur Gearshaft
00-236-5098
Spur Gearshaft
00-236-5565
Rigid Connecting Link
1.070" overall length
00-236-6290
Manual Control Lever
Steel, cadmium plated, 7.875 in. o/a lg, 1 end 0.375-16 unc external thd 0.688 in.lg, bent 125.0 deg, 0.750 in. radius, welded, 2 holes at other end 0.265 in. dia, other end 2.014 in. lg, 0.640 in. w, 0.635 in. thk, slot 1.442 in. lg by 0.155 in. w
00-236-6922
Straight Shaft
17.125" overall length
00-236-9757
Push-pull Control Assembly
00-236-9939
Rigid Connecting Link
9.000" overall length
00-236-9942
Rigid Connecting Link
8.125" overall length one side of one @end has raised face, 1.563 in. face od by by 0.375 in. face thickness
00-237-0083
Spline Adapter
Steel, 2.000 in.0/a lg, 1.808 in.dia, 21 spline
