01-375-7293
Shouldered Shaft
Used on w/s support equipment,b.
01-375-7321
Mechanical Nonaircraft Actuator
Used on 2320-01-353-9098. steel
01-375-7322
Mechanical Nonaircraft Actuator
Used on 2320-01-353-9098. steel; 65.0 mm lg; 59.5 mm w; 19.2 mm h
01-375-7323
Mechanical Nonaircraft Actuator
Used on 2320-01-353-9098. steel; 80.0 mm w
01-375-7325
Mechanical Drive Housing
Used on 2320-01-353-9098; truck, family of medium tacticle vehicle(fmtv)-medium.
01-375-7384
Brake Drum
12.000" center hole diameter
01-375-7393
Remote Control Lever
Used on 3930-01-158-0849.
01-375-7394
Remote Control Lever
01-375-7397
Rigid Connecting Link
01-375-7484
Actuating Line Cylinder Assembly
Used on container hauler mk18. 6.000" bore diameter right hand tilt cylinder
01-375-7777
Shouldered Shaft
10.520" overall length second end has hole thru .094 in. dia
01-375-7784
Mechanical Drive Housing
01-375-7864
Eye Rotating Shaft Bracket
7.844" overall length bolt hole:qty-2, shape-round, size-0.200 in. dia; distance from bore ctrline to base bottom, 0.875 in.; matl-steel ST6001, aisi 4140
01-375-8094
Straight Shaft
Used on transmission,borg-warner corp;model 71c-72c.
01-375-8095
Straight Shaft
1.906" overall length
01-375-8096
Shouldered Shaft
01-375-8097
Shouldered Shaft
Used on transmission,borg-warner corp,model 71c-72c.
01-375-8098
Shouldered Shaft
Used on 4920-01-272-5962. 27.0000" overall length second end has cutout .560" wide; 1.50" long.also has countersunk hole .500" wide x 1.25" deep
01-375-8108
Counterbalance Weight
1.750 in. o/a lg; 0.500 in. w
01-375-8109
Counterbalance Weight
Used on 1730-01-266-4338. brass; 1.125 in. outside dia; 0.399 in. inside dia; 0.188 in. w
01-375-8127
Brake Disc
Used on 1730-01-266-4338. steel, mil-s-853, passivate finish, mil-s-5002; 2.125 in. lg; 0.437 in. inside dia
01-375-8128
Mechanical Drive Housing
Used on 1520-01-298-4532 uh-60 blackhawk helicopter.
01-375-8129
Linear Actuating Cylinder Cap
Used on 1220-00-933-1203. 2.906" overall length 1.635" overall width material document
01-375-8190
Bell Crank
Used on forklift. part of forklift mast assembly
01-375-8192
Remote Control Lever
4.500" overall width 1.501" bore diameter shaft end has 2nd hole, same dia, 4.000 in.from 1st hole w/0.870 in.thk collar around hole on 1 side of lever, 3.000 in.od; link end has rectangular hole, 1.750 in.w by 3.500 in.lg flat, two hole link end
01-375-8375
Counterbalance Weight
Used on aim-120. counterweight, gyro
01-375-8597
Rigid Connecting Link
01-375-8735
Counterbalance Weight
Used on aim-120. weight, trim gimbal:dimensions are.399 inch diameter, .022 inch thick with a .086 inch hole through the center
01-375-8736
Counterbalance Weight
Used on aim-120. weight, trim gimbal:dimensions are.395 inch diameter, .010 inch thick with a .086 inch hole through the center
01-375-8737
Counterbalance Weight
Used on aim-120. weight, trim gimbal:dimensions are.395 inch diameter, .015 inch thick with a .086 inch hole through the center
01-375-8738
Counterbalance Weight
Used on aim-120. weight, trim gimbal:dimensions are.395 inch diameter, .006 inch thick with a .086 inch hole through the center
01-375-8770
Actuating Line Cylinder Assembly
2.000" bore diameter
01-375-9608
Drive Flexible Shaft
01-375-9614
Rigid Connecting Link
01-375-9950
Shaft Collar
1.0000" outside diameter 0.3780" bore diameter plain round
01-375-9951
Shouldered Shaft
Used on ffg guided missile frigate.
01-375-9952
Shouldered Shaft
Used on ffg guided missile frigate.
01-375-9975
Counterbalance Weight
Used on aim-120. counterweight, gimbal
01-375-9991
Manual Control Lever
Used on av-8 acft. 12.150" overall length 2.000" overall width anodize surface treated
01-376-0003
Actuating Linear Cylinder
Used on tumbler,barrel spider assy.
01-376-0004
Actuating Line Cylinder Assembly
Used on special tools. 1.500" overall width 1.250" bore diameter top cylinder assembly; plating piston rod, hard chrome plate cover
01-376-0031
Control Cam
Used on radar set an/aps-503.
01-376-0110
Push-pull Control Assembly
01-376-0220
Inertia Damper
01-376-0683
Multiple Gears Gearshaft
01-376-0865
Extension Shaft
Threaded socket
01-376-1055
Straight Shaft
Used on sicard snow sweeper,model sw-112r.
