00-014-1842
Shouldered Shaft
00-014-1879
Shouldered Shaft
4.156" overall length
00-014-2047
Helical Gearshaft
Stainless steel; 0.805 in.
00-014-2049
Multiple Gears Gearshaft
00-014-2957
Shouldered Shaft
12.920" overall length
00-014-2992
Bell Crank
0.500" bore diameter 1.125 in. dia, 0.035 in. dp cbore; 90.0 deg bend angle zinc surface treated flat, one or more holes both arms
00-014-4461
Actuating Line Cylinder Assembly
0.750" bore diameter
00-014-4686
Rigid Connecting Link
Used on ch-47d,cargo hel.
00-014-5020
Shouldered Shaft
00-014-6865
Shouldered Shaft
Used on 3930-00-781-3856. 2nd end has mtg flange w/bolt holes
00-015-0435
Differential Gear Unit
Used on radio receiver-transmitter,rt-793/asq,rt-793a/asq & mounting adapter mt-3730/asq.
00-015-0467
Rigid Connecting Link
00-015-1395
Rigid Connecting Link
Locknut included
00-015-1688
Shouldered Shaft
4.420" overall length
00-015-2085
Hydraulic Accumulator
Used on pump assy p/n 144-101-1,lgm-30 missile. t.o. 35C1-2-48-3 fig 6-20
00-015-2106
Spur Gearshaft
00-015-2110
Mechanical Drive Housing
00-015-2123
Spur Gearshaft
00-015-2129
Flexible Shaft Assembly Core
52.550" overall length passivate surface treated
00-015-2132
Flexible Shaft Assembly Casing
49.780" overall length wrenching facility shape:hexagon; shank outside dia:0.551 min 0.555 max in.; thread direction:right-hand; thread class:3b; thread length:0.250 in. nom; bore length:1.500 in. nom; shoulder outside dia:0.680 min 0.685 max in.; width across flats:0.872 in. nom; dia:0.875 in.; surface treatment:passivated
00-015-2133
Flexible Shaft Assembly Casing
47.130" overall length 0.875 in.dia o/a; thread location:internal; width across flats:0.872 in.; surface treatment:passivated; thread class:3b; thread direction:right-hand; thread lg:0.250 in.nom; wrenching facility shape:hexagon; bore lg:1.500 in.nom; shank outside dia 0.551 in.min
00-015-2161
Shouldered Shaft
2.588" overall length
00-015-2162
Spur Gearshaft
Used on t56 eng. 1.570" overall length cres ams 6260; 0.800 min, 0.801 max in. lg spurs; internal splines; 0.483 nom in. id; 15 teeth length of shaft
00-015-2168
Shouldered Shaft
Used on acft eng t56. steel AMS6272, rockwell C60 hardness; length 1.317-1.322; od 0.435; id 0.250
00-015-2188
Counterbalance Weight
Used on balance plate,turbine rotor,t-56 engine aircraft.
00-015-2783
Manual Control Lever
Steel, 16.000 in.o/a lg, 0.312 in.thk, 56.438 max width, eccentric center hole, 5.625 in.axis lg, 4.938 in.axis shortest, 0.750 in.mt.hole, 4.500 in.handle offset, 16.000 in.handle lg
00-015-2790
Push-pull Control Assembly
00-015-3731
Straight Shaft
7.250" overall length
00-015-3968
Shouldered Shaft
2.483" overall length both ends chamfered 0.010 in. by 45 deg porm 5 deg
00-015-4377
Straight Shaft
Used on 6610008762819. 4.310" overall length
00-015-6667
Spur Gearshaft
Used on 2350-00-056-6808. 4.125" overall length
00-015-6675
Shouldered Shaft
16.670" overall length
00-015-6710
Eye Nonrotating Shaft Bracket
5.875" overall length 1 bolt hole quantity
00-015-6902
Hub Clamp
Chromate surface treated
00-015-6905
Hub Clamp
Chromate surface treated
00-015-7635
Straight Shaft
13.000" overall length shaft has 5 holes through to center, 0.125 in. dia
00-015-8202
Multiple Gears Gearshaft
00-015-8479
Flexible Shaft Assembly Casing
Used on application data:acft engine accessory. 59.200" overall length wrenching facility shape:hexagon; shank outside dia:0.550 min 0.554 max in.; thread direction:right-hand
00-015-8546
Eye Nonrotating Shaft Bracket
Used on t-56 aircraft engine. 2.500" overall length
00-015-8692
Remote Control Lever
Used on transmissions..
00-015-8804
Linear Actuating Cylin Parts Kit
00-016-0349
Rigid Connecting Link
Used on bullseye.
00-016-0356
Control Cam
Used on r0-247-f.
00-016-1012
Piston Ring
Concentric ring style
00-016-1062
Retaining Shaft Plate
Used on engine accessory, aircraft. 1 in. between center of mtg holes
00-016-1198
Rigid Connecting Link
20.693" overall length effective length: 20.000"; end attachment info: 1st end has 1.470 inch right hand thread length, 1/4-28 unf, 2nd end has 1.000 inch right hand tread length, 3/8-24 unf, diameter 0.766 1st end, 0.620 2nd end, material: steel ams 5355, ty 17-4pn, surface treatment cadmium plated, qq-p-416, ty 1, cl 3; connector bearing hole location - one end; locknut included; fork depth 1.190 inch 2nd end; fork span width 0.286 inch 2nd end, distance from fork end to hole center 0.310 inch 2nd end
00-016-3641
Shaft Collar
0.630" outside diameter 0.2500" bore diameter one flat bearing surface counterbored to 0.530 in. dia passivate surface treated plain round
00-016-4153
Extension Shaft
0.500" outside diameter plain socket
