01-358-0661
Straight Shaft
Used on 1240-00470-2156. 3.084" overall length
01-358-0664
Counterbalance Weight
Used on helicopter,united technologies sikorsky ai,model h53j. part of damper assy, rotary wing head
01-358-0668
Linear Actuating Cylinder Cap
Used on control cylinder assembly with rotary servo and horsepower limiter,models series 41,61,62 and 63. has facility for seal; material:iron no.40; cap cylindrical w/4 thd ear tabs at base
01-358-0914
Control Cam
Used on pacer special aircraft.
01-358-2063
Shouldered Shaft
01-358-2064
Shouldered Shaft
01-358-2065
Shouldered Shaft
01-358-2102
Ball Joint
Used on 2320-01-346-9317. spring-not incl.; nonadjustable; unthd socket end type-female; unthd socket end id 2.120 in.; socket has 4 mtg holes 0.469 in. dia, on a flange around socket; surface treat.-oxide or zinc plate
01-358-2103
Retaining Shaft Plate
Used on 6230-01-276-6776. 5.000" outside diameter material is black abs plastic; mtg hole spacing: 180 deg apart; material: plastic
01-358-2524
Straight Shaft
01-358-2525
Shouldered Shaft
Used on 2340-01-340-5246.
01-358-2526
Shouldered Shaft
11.1200" overall length first end has an internal square; is for the right hand side.
01-358-2527
Shouldered Shaft
11.1200" overall length first end has an internal first end has an internal square; is the left hand shaft.
01-358-2544
Mechanical Drive Housing
Used on aircraft, c-17a(globemaster).
01-358-2554
Hydraulic Accumulator Cylinder
1.500" bore diameter non-reparable air cylinder; prelubricated
01-358-2577
Rigid Connecting Link
Used on mcdonnell douglas c-17a aircraft.
01-358-2578
Rigid Connecting Link
Used on northrup corporation b-2 aircraft.
01-358-2988
Extension Shaft
Used on 3820-01-178-5057 / 97403. 1.250" outside diameter plain socket
01-358-3190
Shouldered Shaft
Repair part for the i-10 press; guide roller
01-358-4061
Actuating Line Cylinder Assembly
Used on stern diving gear cylinder.
01-358-4204
Counterbalance Weight
Used on pacer special. tungsten alloy, Y117A001-02
01-358-4235
Rigid Connecting Link
Used on pacer special aircraft.
01-358-4236
Rigid Connecting Link
Used on pacer special aircraft.
01-358-4350
Shouldered Shaft
Used on aircraft models ch-46d/e,hh-46d,uh-46d. 39.642" overall length psmallest end measures 4.306 in. nom. dia.; largest end not including shoulder 6.621 in. nom. dia.; finish includes shotpeening
01-358-4367
Spur Gearshaft
Used on f110-ge-400 engine. 2.812" overall length
01-358-4833
Shouldered Shaft
Used on pacer dawn. 17.760" overall length U32 deg. bevel, first end; radius 0.040-0.060, 6 places; 2.000-12un-3a threaded area, 2 places; second end has a perpendicular hole 0.670-0.710 in. deep with 0.500-13unc threads 0.630-0.710 deep with center located 0.960-1.040 from end
01-358-4884
Single Disk Brake
01-358-4897
Rigid Connecting Link
Used on pacer special.
01-358-5174
Rigid Connecting Link
Supp features:thrust reverser; static load: limit, 4500 lbs.; ultimate load, 5500 lbs.
01-358-5175
Rigid Connecting Link
Used on pacer special.
01-358-5176
Rigid Connecting Link
Used on pacer special.
01-358-5646
Electrical-fl Connector Assembly
Used on m1 series tank. M1 series tank
01-358-5853
Remote Control Lever
0.954" bore diameter offset height: 0.050 in. clevis link end, securing hole (s) shaft end
01-358-5854
Remote Control Lever
0.773" bore diameter offset height: 0.050 in. clevis link end, securing hole (s) shaft end
01-358-5855
Remote Control Lever
0.773" bore diameter offset height: 0.050 in. clevis link end, securing hole (s) shaft end
01-358-5856
Remote Control Lever
0.773" bore diameter clevis link end, securing hole (s) shaft end
01-358-5857
Remote Control Lever
1.500" overall width
01-358-5858
Remote Control Lever
01-358-5859
Bell Crank
0.954" bore diameter
01-358-5860
Remote Control Lever
0.938" bore diameter offset height: 0.510 in. clevis link end, securing hole (s) shaft end
01-358-5861
Remote Control Lever
Offset height: 0.110 in. clevis link end, securing hole (s) shaft end
01-358-5862
Straight Shaft
01-358-5863
Straight Shaft
01-358-5864
Straight Shaft
01-358-5865
Straight Shaft
01-358-5873
Shouldered Shaft
01-358-5874
Shouldered Shaft
