01-351-8224
Linear Actuating Cylinder Piston
01-351-8245
Actuating Line Cylinder Assembly
01-351-8263
Spur Gearshaft
Used on outboard marine corp 1989 35,40,48 & 50 hp engines. includes pin, p/n 332490
01-351-8264
Spur Gearshaft
01-351-8265
Spur Gearshaft
01-351-8308
Multiple Disk Brake
Used on hydraulic brake,eskridge inc,model no. 90c.
01-351-8325
Eye Nonrotating Shaft Bracket
Used on 2350-01-305-0028. 6.250" overall length 1 bolt hole quantity
01-351-8328
Ball Joint
Used on 4930-01-103-7609. adjustable; spring-incl.; lgth to joint 0.970 in.; ball end:internal thd 1/4-28 nf, external thd 5/16-24 nf; matl-steel aisi 1010 single, right angle, open
01-351-8329
Remote Control Lever
Used on general motors corp 1973-1991 chevrolet light duty trucks.
01-351-8333
Worm Shaft
For worm gear reduction 30:1
01-351-8412
Straight Shaft
Used on pacer special.
01-351-8413
Shouldered Shaft
Used on pacer special.
01-351-8414
Shouldered Shaft
Used on pacer special.
01-351-8508
Shouldered Shaft
01-351-8906
Retaining Shaft Plate
Used on 1650-00-182-3133 hydraulic motor pump,aircraft models ch-46a/d/e/f.
01-351-9048
Multiple Disk Brake
01-351-9064
Piston Rod Guide
01-351-9065
Piston Rod Guide
01-351-9085
Linear Actuating Cylin Parts Kit
Used on container hauler mk18.
01-351-9086
Shouldered Shaft Assembly
Used on container hauler mk18.
01-351-9699
Eye Nonrotating Shaft Bracket
01-351-9747
Disc Brake Caliper
01-351-9764
Mechanical Nonaircraft Actuator
01-352-0011
Shaft Collar
Used on radar set,model an/apn-512.
01-352-0012
Straight Shaft
Used on eim company of valve operator model 2000 series.
01-352-0013
Straight Shaft
3.287" overall length
01-352-0014
Straight Shaft
01-352-0016
Straight Shaft
01-352-0017
Shouldered Shaft
7.610" overall length
01-352-0018
Shouldered Shaft
01-352-0019
Shouldered Shaft
01-352-0020
Shouldered Shaft
Used on pump,aurora pump co.,models 411,412,and 413.
01-352-0021
Shouldered Shaft
8.234" overall length
01-352-0022
Shouldered Shaft
2.410" overall length second end has second square step, 0.610 in width across flats, 0.210 in length of step
01-352-0023
Straight Shaft
2.500" overall length 1st end has 2 drilled holes, 1 cross drilled, 0.078 in.thru, 0.520 in.from end, other hole is parallel to shaft axis, 0.078 in.dia, and runs into cross drilled hole
01-352-0024
Shouldered Shaft
3.278" overall length
01-352-0042
Mechanical Drive Housing
Used on sundstrand aviation power unit model no. cdaspdu-02; aircraft, b-2(spirit).
01-352-0043
Piston Linear Actuating Cyli Rod
01-352-0044
Linear Actuating Cylinder Head
01-352-0091
Actuating Line Cylinder Assembly
01-352-0172
Bell Crank
Used on fire control system, mk92 (fcs). passivate surface treated
01-352-0173
Remote Control Lever
01-352-0174
Rigid Connecting Link
Body necks down to 0.600 in.dia on each end
01-352-0175
Rigid Connecting Link
Body necks down to 0.600 in.dia on each end
01-352-0176
Rigid Connecting Link
1 end adjustable; body necks down to 0.600 in.dia at both ends
01-352-0177
Rigid Connecting Link
1 end adjustable; body necks down to 0.600 in.dia at both ends
01-352-0178
Rigid Connecting Link
1 end adjustable, 0.230 in.plus/minus; body necks down to 0.600 in.dia on each end
