01-292-8010
Brake Band And Lining
01-292-8025
Pressu Shaft And Spring Assembly
01-292-8491
Worm Shaft
End item application speed reducer
01-292-8497
Push-pull Control Assembly
01-292-8555
Shaft Collar
1.500" outside diameter 0.6260" bore diameter 1 end of bore thd, 5/8-18unf-2b, 0.250 in.dp; ext wrench flats on thd bore end, 1.250 in. across flats; opposite end has retaining ring groove, 0.146 in.wide by 0.062 in.dp plain round
01-292-8556
Hub Clamp
1.062" outside diameter 0.4375" bore diameter round sectional, two bolt secured
01-292-8557
Straight Shaft
01-292-8558
Straight Shaft
01-292-8559
Straight Shaft
1.068" overall length
01-292-8599
Control Cam
Delrin o/a; 2.000 in.od, 0.500 in.thk, 0.250 in.bore, 4 lobes on od
01-292-8602
Spur Gearshaft
0.075" overall length
01-292-8835
Spur Gearshaft
01-292-8836
Spur Gearshaft
1.750" overall length black oxide finish
01-292-8926
Rigid Connecting Link
01-293-0790
Straight Shaft
Used on model 110013gmpd. material AMS6487; u/o paul recharer, hp warm end
01-293-1248
Mechanical Drive Housing
Used on actuator drive assembly onc-5 acft. 4 ea mtg holes
01-293-1375
Shouldered Shaft
01-293-1478
Shouldered Shaft
Used on m-28 linker/delinker. 8.4688" overall length full keyway 4.250 in. lg., 0.125 in. wide, 0.075 in. deep, 1.1875 in. fromsecond end
01-293-1523
Bevel Gearshaft
Used on hyd. mech.actuator on thef-16c/d acft. matl may be bar stock; all surfaces finish; 8.785 in. lg., bevel gear mounting distance 0.495 in.; bevel gear end data, 22 teeth, pressure angle 22.5 deg, pitch dia 2.2000, mating p/n 2047877-1, no. of mating teeth 22; second end is splined, 15 teeth, pressure angle 30 deg, miner dia 0.8471, second end dia 0.9720 in., 0.380 in. lg., second spline 2.615 in. in from second end has 22 teeth, pressure angle 30 deg, miner dia 1.031 in. dia, 5.675 in. lg; bevel end has hole drilled 0.860 in. dia, 6.470 in. lg, second end has hole drilled 0.500 in. dia, 1.270 in. lg
01-293-1850
Brake Disc
Used on 70 series non-magnetic navy brake,dings co. stainless steel;
01-293-2455
Shouldered Shaft
Used on sound isolation coupling and stabilizing shaft assembly.
01-293-2456
Shouldered Shaft
Used on diesel engine.
01-293-2504
Actuating Linear Cylinder
Used on compressor air lp. 1st stage
01-293-2505
Actuating Linear Cylinder
Used on compressor air lp. 2nd stage
01-293-2506
Actuating Linear Cylinder
Used on compressor air lp. 3rd stage
01-293-2507
Actuating Line Cylinder Assembly
01-293-2580
Body Hub
Used on sound isolation coupling and stabizing shaft assembly.
01-293-2740
Control Cam
Reference data
01-293-2858
Friction Lining
4.500" overall length
01-293-2865
Flexible Shaft Assembly
01-293-2867
Rigid Connecting Link
01-293-2869
Shouldered Shaft
01-293-2870
Shouldered Shaft
57.125" overall length
01-293-2879
Spur Gearshaft
01-293-2880
Spur Gearshaft
01-293-2881
Spur Gearshaft
01-293-2883
Speedometer-tachometer D Adapter
01-293-3045
Rigid Connecting Link
01-293-3046
Rigid Connecting Link
01-293-3472
Shouldered Shaft
01-293-3492
Nonvehicular Propeller Shaft
Right-hand major diameter: 1.749 in. min
01-293-3499
Remote Control Lever
0.505" bore diameter plate on far side
01-293-4425
Straight Shaft
Used on 1740-01-082-1304.
01-293-4429
Linear Actuating Cylin Parts Kit
Used on 3930-01-158-0849.
01-293-4430
Linear Actuating Cylin Parts Kit
Used on 3930-01-158-0849.
01-293-4450
Manual Control Lever
Used on 3895-00-014-0583. hydraulically operated with lever; with strain
01-293-4451
Manual Control Lever
Used on 3950-01-110-9224.
