01-244-8501
Spur Gear
Hubless
01-244-8502
Antibacklash Spur Gear
Protruding hub
01-244-8503
Antibacklash Spur Gear
Protruding hub
01-244-8566
Groove Pulley
01-244-8567
Groove Pulley
01-244-9751
Helical Gear
Includes 3 weight plugs protruding hub
01-244-9825
Helical Gear
Copper surface treated protruding hub
01-245-0067
Drive Motion Gear
01-245-1339
Groove Pulley
01-245-2487
Spur Gear
5 holes 0.323 in. dia.; gear data: tooth form=full depth; diametral pitch=10.16; addendum=0.0984; root dia.=3.691; max. tooth-tooth composite error=0.00145; max. tooth thk.=0.1526; meas. over pins=4.1803; pin dia.=0.1728; max. total composite error=0.00419; no.of teeth of mating gear=32; center distance=3.543; spline data: pitch=20/40, pressure angle=30 deg.; base dia.=0.64951; form dia.=0.804; max. meas. between pins=0.6248; pin dia.=0.864 oxide surface treated protruding hubs
01-245-2488
Spur Gear
Protruding hub
01-245-2760
Bevel Matched Gear Set
01-245-3705
Mechanical Drive Guard
Used on 2320-01-028-4397. l-shaped w/two mtg holes; screen attached; part of radiator grille
01-245-3916
Mechanical Drive Guard
Used on fram shafting system, 378-fram-243-013 sht 3, port & starboard, fwd fairwater for aft strut onboard 378 ft whec coast guard vessels.
01-245-4977
Antibacklash Spur Gear
Used on UMTE.
01-245-5351
Bevel Matched Gear Set
01-245-6664
Bevel Matched Gear Set
01-245-6910
Groove Pulley
Used on chrysler corp,engine bracket mounted,1983 horizon and omni passenger car equipped with 2.2 liter engine. made for autos with air conditioning units
01-245-7385
Bevel Gear
Used on b1b aircraft,flight control.
01-245-7688
Groove Pulley
3.001" bore diameter anodize surface treated webbed or spoked
01-245-9114
Antibacklash Spur Gear
01-245-9115
Antibacklash Spur Gear
01-245-9116
Antibacklash Spur Gear
01-245-9193
Spur Gear
Used on 1981-1984 ford truck series f100-f350.
01-245-9899
Bevel Matched Gear Set
01-246-1183
Antibacklash Spur Gear
01-246-1910
Worm Gear
4 required; assembled with main drive shaft
01-246-4192
Roller Chain
For main drive
01-246-4234
Sprocket Wheel
17 teeth; assembled with main drive shaft
01-246-5238
Gear Cluster
Both bore ends countersunk; 1st end 2.057 in. dia by 43.0 deg; second end 1.957 in. dia by 43.0 deg; gear pitch dia. 3.191 nom in.; gear face width 0.742 nom in.; gear pressure angle 1st end 20 deg, 2nd end 18.4894 deg; left gear; gear tooth 19 silver surface treated
01-246-5277
Groove Pulley
3.000" overall length 1.125" bore diameter plain
01-246-5278
Groove Pulley
01-246-5930
Roller Chain
The 9C000354-1 chain is a ansi 40/.500 pitch, single strand chain. the length is 122", not including the connecting link
01-246-6055
Internal Gear
