NSN 2920-00-293-4380 NIIN 002934380 — Engine Accessory Generator

NSN
Item Name
Assigned
DEMIL
Shelf Life
UOM
Using Services
NSN:
2920-00-293-4380
2920002934380
Description:
GENERATOR,ENGINE ACCESSORY
NSN Assigned:
01-JAN-63
DEMIL:
NO
Shelf Life:
N/A
UOM:
1 EA
Using Services:
Navy

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

2920-00-293-4380 Specification Set by the OEM (see RNCC code 3)

Thread Direction AAJF:

RIGHT-Hand

Thread Length AASA:

0.796in. ⁓51/64"

Second Step Diameter ABPT:

0.668in. and 0.669in.

Keyway Width ABRR:

0.125in.

Unthreaded Portion Length ABVA:

1.235in.

Mounting Hole Thread Direction ACJC:

RIGHT-Hand

Mounting Style ADER:

bracket mtd w/three mtg holes, top hole threaded

Environmental Protection ADZC:

corrosion resistant and fungus resistant

Keyway Length AFYS:

0.625in.

Submersibility AHZV:

submersible

Shaft Rotation Direction AKCT:

counterclockwise

Distance From End To Keyway Center ANTX:

1.391in.

Thread Diameter AWDP:

0.500in.

Armature Minimum Speed In Rpm At Full Current Output BCGD:

1600

Maximum Output Current Rating In Amps BCGF:

25.0

Minimum Current Cut-in Speed In Rpm BCGG:

1250

Grounding Method BCGN:

internal

Shaft Drive End Style BCGS:

straight shaft end, threaded, w/keyway

Distance Between Shaft Center And Bottom Mounting Hole Center BCLY:

3.874in. and 3.876in.

Distance Between Shaft Center And Top Mounting Hole Center BCLZ:

3.874in. and 3.876in.

Angular Deviation Of First Hole From Top Center In Deg BCMB:

159.0

Angular Deviation Of Second Hole From First Hole In Deg BCMC:

201.0

Distance Between Inside Surfaces Of Hinge Bracket BCMD:

7.243in. and 7.257in.

Distance Between Outside Surfaces Of Hinge Bracket BCMF:

8.118in. and 8.132in.

Bottom Mounting Hole Diameter BCMH:

0.432in. and 0.442in.

Maximum Rated Armature Speed In Rpm BCND:

8000

Thread Series BZRR:

unf

Thread Class CFHL:

2a

Mounting Hole Thread Series Designator CMLK:

unc

Mounting Hole Thread Diameter CMLL:

0.375in.

Mounting Hole Thread Quantity Per Inch CMLM:

16

Mounting Hole Thread Class CMLN:

2b

Thread Quantity Per Inch CMLP:

20

Voltage In Volts ELEC:

24.0

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
1117495
Cage Code:
16764
RNCC:
3
RNVC:
9
DAC:
X
RNAAC:
XX
Status:
A
MSDS:
SADC:
Part Number:
1117495
Cage Code:
24617
RNCC:
5
RNVC:
9
DAC:
3
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
1117495
Cage Code:
1LW55
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
1922302
Cage Code:
1LW55
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
874362
Cage Code:
89749
RNCC:
5
RNVC:
2
DAC:
5
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
7355736
Cage Code:
19207
RNCC:
5
RNVC:
2
DAC:
X
RNAAC:
XX
Status:
A
MSDS:
SADC:
Part Number:
1117495
Cage Code:
97907
RNCC:
5
RNVC:
2
DAC:
2
RNAAC:
PA
Status:
A
MSDS:
SADC:
Part Number:
MD15624
Cage Code:
76558
RNCC:
5
RNVC:
9
DAC:
X
RNAAC:
XX
Status:
A
MSDS:
SADC:
Part Number:
1922302
Cage Code:
16764
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
TG
Status:
A
MSDS:
SADC:
Part Number:
874362
Cage Code:
12603
RNCC:
5
RNVC:
9
DAC:
X
RNAAC:
XX
Status:
A
MSDS:
SADC:
Part Number:
1035G1
Cage Code:
56442
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
AX
Status:
A
MSDS:
SADC:

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
17311
FIIG:
A14700
Concept No.:
1
App. Key:
A
Cond. Code:
2
Status:
A
MOUNTING STYLE BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED style nsn 2920-00-293-4380
MOUNTING STYLE BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED style nsn 2920-00-293-4380
SHAFT DRIVE END STYLE STRAIGHT SHAFT END, THREADED, W/KEYWAY style nsn 2920-00-293-4380

Definition Definition of approved item name (AIN): "GENERATOR,ENGINE ACCESSORY"

A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "generating sets". For generators specifically designed for aircraft use and not mounted on the engine, see generator, direct current.

Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims

Pack Size
Pack Weight
Item Weight
Item Dim.
Pack Size:
--
Paclk Weight:
0.0000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
Q
LVL_B:
Q
LVL_C:
LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

2920-00-293-4380 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
U
ESD:
ESD:
ADPE:
CRITL:
X
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) U

Precious metal content is unknown

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

  Identification Codes

HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.

PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Material Management Material categorization and source of supply

SOS
SMIC
MMAC
MCC
SOS:
S9C
SOS:
MMAC:
MCC:
Source of Supply (SOS) S9C

Defense supply center columbus, ohio 43215

  Material Codes

SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.

SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.

MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.

MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category

IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.