heat treat T4
QQ-A-327 fed spec single material response
A short, longitudinal member which joins adjacent frames, ribs, and the like. It is generally used in areas requiring additional support for doors, equipment, and the like.
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
No special marking.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
Other Parts, Nesoi, For Use In Other Military Aircraft, Spacecraft and Spacecraft Launch Vehicles (excluding Parts Of Communication Satellites)
Type Goods Parts For Military
Parts Of Aircraft and Associated Equipment, Spacecraft (including Satellites) and Spacecraft Launch Vehicles, N.e.s.
No special type of cargo code applicable.
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)
NAIC: North American Industry Classification. Classifies items and business activity for the purpose of collecting, analyzing, and publishing statistical data related to the U.S. business economy.
SITC: Standard International Trade Classification.
NMFC: National motor freight classification. A six position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on truckloads vs. less than truckload.
UFC: Universal freight classification. a five position numeric code, which divides articles into groups or classes according to physical characteristics. the classification is based on carload vs. less than carload.
LTL: Less than a truckload rating.
LCL: Less than a carload rating.
WCC: Water commodity code. A three position code that indicates all shipments via water.
TCC: Type of Cargo Code. A one position code for all shipments via water to identify the type of cargo included within the shipment unit.
SHC: Special Handling Code. A one position code for all shipments via water to identify the exception handling required for cargo included within the shipment unit
ADC: Air Dimension Code. A one position alpha code that identifies dimensional characteristics of air shipments by relating the length, width, or height dimensions of the largest piece to the minimum size cargo door opening of an aircraft
ACC: Air Commodity Code. A one position code for all shipments via air to identify material for manifesting and customs requirements
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Defense logistics agency, enterprise business systems
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.
MOE is an acronym for "Major Organizational Entity".
These organizations represent a subdivision of a U.S. governmental organization or an agency of the north atlantic treaty organization (NATO), and other friendly governments and international organizations participating in the federal catalog program.
DSOR: Depot Source of Repair. Department of Defense (DOD) policies require that program man- agers seek best value in depot maintenance support and that the department maintains organic core depot maintenance capabilities. These policies are implemented through the Depot Source of Re- pair (DSOR) decision process.
MOE Rule: a four position code that reflects management responsibility within participating military services, civil agencies, nato and other foreign countries. the information included in the moe rule is a combination of department of defense (dod) and service/agency cataloging/supply management assignments which are made on the basis of organizational responsibilities.
NIMSC: Nonconsumable Item Material Support Code.
AMC: A code reflecting the decision of the primary inventory control activity (PICA) as to technique of purchasing to be employed from a planned procurement review.