Serving our customers with quality and safety first.
outside grooved, straight face
5.500in.
5.907in.
0.156in.
concentric
0.125in.
diagonal joint
any acceptable
81349-MIL-S-5049 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
hydraulic system, acft
1EA
Any acceptable
Concentric
0.156 inches
5.907 inches
5.500 inches
Schedule B number: 8412909005
nmfc 133300
Parts of linear acting hydraulic power engines and motors
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
concentric ring style 0.156" material thickness 5.907" outside diameter 5.500" inside diameter
1. | MIL-S-5049 | Cage 81349 |
2. | SRC-49 | Cage 25942 |
3. | OAS-49 | Cage 26303 |
4. | FWR-3C-49 | Cage 83908 |
5. | GI 1171-49 | Cage 96679 |
6. | AN6231A49 | Cage 88044 |
7. | DRI-49 | Cage 30438 |
8. | G-49 | Cage 72637 |
9. | ISR-49 | Cage 95725 |
Nothing similar to this part number was found in our inventory
A circular, single or multipiece, rigid, metallic or nonmetallic item having a centrally located hole with a sharp edge on the inside periphery. it is supplied in various cross-sectional shapes and is designed to be installed in a cylinder, shock strut, or similar device to remove excess oil, dirt, ice, and/or foreign material from a piston, ram, or sliding rod. excludes packing, preformed; ring, piston; and seal ring, metal.